Integrate BACKBEAT SDK and resolve KACHING license validation

Major integrations and fixes:
- Added BACKBEAT SDK integration for P2P operation timing
- Implemented beat-aware status tracking for distributed operations
- Added Docker secrets support for secure license management
- Resolved KACHING license validation via HTTPS/TLS
- Updated docker-compose configuration for clean stack deployment
- Disabled rollback policies to prevent deployment failures
- Added license credential storage (CHORUS-DEV-MULTI-001)

Technical improvements:
- BACKBEAT P2P operation tracking with phase management
- Enhanced configuration system with file-based secrets
- Improved error handling for license validation
- Clean separation of KACHING and CHORUS deployment stacks

🤖 Generated with [Claude Code](https://claude.ai/code)

Co-Authored-By: Claude <noreply@anthropic.com>

vendor/github.com/golang/protobuf/AUTHORS

@@ -0,0 +1,3 @@
+# This source code refers to The Go Authors for copyright purposes.
+# The master list of authors is in the main Go distribution,
+# visible at http://tip.golang.org/AUTHORS.

vendor/github.com/golang/protobuf/CONTRIBUTORS

@@ -0,0 +1,3 @@
+# This source code was written by the Go contributors.
+# The master list of contributors is in the main Go distribution,
+# visible at http://tip.golang.org/CONTRIBUTORS.

vendor/github.com/golang/protobuf/LICENSE

@@ -0,0 +1,28 @@
+Copyright 2010 The Go Authors.  All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+    * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+    * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+

vendor/github.com/golang/protobuf/proto/buffer.go

@@ -0,0 +1,324 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	"errors"
+	"fmt"
+
+	"google.golang.org/protobuf/encoding/prototext"
+	"google.golang.org/protobuf/encoding/protowire"
+	"google.golang.org/protobuf/runtime/protoimpl"
+)
+
+const (
+	WireVarint     = 0
+	WireFixed32    = 5
+	WireFixed64    = 1
+	WireBytes      = 2
+	WireStartGroup = 3
+	WireEndGroup   = 4
+)
+
+// EncodeVarint returns the varint encoded bytes of v.
+func EncodeVarint(v uint64) []byte {
+	return protowire.AppendVarint(nil, v)
+}
+
+// SizeVarint returns the length of the varint encoded bytes of v.
+// This is equal to len(EncodeVarint(v)).
+func SizeVarint(v uint64) int {
+	return protowire.SizeVarint(v)
+}
+
+// DecodeVarint parses a varint encoded integer from b,
+// returning the integer value and the length of the varint.
+// It returns (0, 0) if there is a parse error.
+func DecodeVarint(b []byte) (uint64, int) {
+	v, n := protowire.ConsumeVarint(b)
+	if n < 0 {
+		return 0, 0
+	}
+	return v, n
+}
+
+// Buffer is a buffer for encoding and decoding the protobuf wire format.
+// It may be reused between invocations to reduce memory usage.
+type Buffer struct {
+	buf           []byte
+	idx           int
+	deterministic bool
+}
+
+// NewBuffer allocates a new Buffer initialized with buf,
+// where the contents of buf are considered the unread portion of the buffer.
+func NewBuffer(buf []byte) *Buffer {
+	return &Buffer{buf: buf}
+}
+
+// SetDeterministic specifies whether to use deterministic serialization.
+//
+// Deterministic serialization guarantees that for a given binary, equal
+// messages will always be serialized to the same bytes. This implies:
+//
+//   - Repeated serialization of a message will return the same bytes.
+//   - Different processes of the same binary (which may be executing on
+//     different machines) will serialize equal messages to the same bytes.
+//
+// Note that the deterministic serialization is NOT canonical across
+// languages. It is not guaranteed to remain stable over time. It is unstable
+// across different builds with schema changes due to unknown fields.
+// Users who need canonical serialization (e.g., persistent storage in a
+// canonical form, fingerprinting, etc.) should define their own
+// canonicalization specification and implement their own serializer rather
+// than relying on this API.
+//
+// If deterministic serialization is requested, map entries will be sorted
+// by keys in lexographical order. This is an implementation detail and
+// subject to change.
+func (b *Buffer) SetDeterministic(deterministic bool) {
+	b.deterministic = deterministic
+}
+
+// SetBuf sets buf as the internal buffer,
+// where the contents of buf are considered the unread portion of the buffer.
+func (b *Buffer) SetBuf(buf []byte) {
+	b.buf = buf
+	b.idx = 0
+}
+
+// Reset clears the internal buffer of all written and unread data.
+func (b *Buffer) Reset() {
+	b.buf = b.buf[:0]
+	b.idx = 0
+}
+
+// Bytes returns the internal buffer.
+func (b *Buffer) Bytes() []byte {
+	return b.buf
+}
+
+// Unread returns the unread portion of the buffer.
+func (b *Buffer) Unread() []byte {
+	return b.buf[b.idx:]
+}
+
+// Marshal appends the wire-format encoding of m to the buffer.
+func (b *Buffer) Marshal(m Message) error {
+	var err error
+	b.buf, err = marshalAppend(b.buf, m, b.deterministic)
+	return err
+}
+
+// Unmarshal parses the wire-format message in the buffer and
+// places the decoded results in m.
+// It does not reset m before unmarshaling.
+func (b *Buffer) Unmarshal(m Message) error {
+	err := UnmarshalMerge(b.Unread(), m)
+	b.idx = len(b.buf)
+	return err
+}
+
+type unknownFields struct{ XXX_unrecognized protoimpl.UnknownFields }
+
+func (m *unknownFields) String() string { panic("not implemented") }
+func (m *unknownFields) Reset()         { panic("not implemented") }
+func (m *unknownFields) ProtoMessage()  { panic("not implemented") }
+
+// DebugPrint dumps the encoded bytes of b with a header and footer including s
+// to stdout. This is only intended for debugging.
+func (*Buffer) DebugPrint(s string, b []byte) {
+	m := MessageReflect(new(unknownFields))
+	m.SetUnknown(b)
+	b, _ = prototext.MarshalOptions{AllowPartial: true, Indent: "\t"}.Marshal(m.Interface())
+	fmt.Printf("==== %s ====\n%s==== %s ====\n", s, b, s)
+}
+
+// EncodeVarint appends an unsigned varint encoding to the buffer.
+func (b *Buffer) EncodeVarint(v uint64) error {
+	b.buf = protowire.AppendVarint(b.buf, v)
+	return nil
+}
+
+// EncodeZigzag32 appends a 32-bit zig-zag varint encoding to the buffer.
+func (b *Buffer) EncodeZigzag32(v uint64) error {
+	return b.EncodeVarint(uint64((uint32(v) << 1) ^ uint32((int32(v) >> 31))))
+}
+
+// EncodeZigzag64 appends a 64-bit zig-zag varint encoding to the buffer.
+func (b *Buffer) EncodeZigzag64(v uint64) error {
+	return b.EncodeVarint(uint64((uint64(v) << 1) ^ uint64((int64(v) >> 63))))
+}
+
+// EncodeFixed32 appends a 32-bit little-endian integer to the buffer.
+func (b *Buffer) EncodeFixed32(v uint64) error {
+	b.buf = protowire.AppendFixed32(b.buf, uint32(v))
+	return nil
+}
+
+// EncodeFixed64 appends a 64-bit little-endian integer to the buffer.
+func (b *Buffer) EncodeFixed64(v uint64) error {
+	b.buf = protowire.AppendFixed64(b.buf, uint64(v))
+	return nil
+}
+
+// EncodeRawBytes appends a length-prefixed raw bytes to the buffer.
+func (b *Buffer) EncodeRawBytes(v []byte) error {
+	b.buf = protowire.AppendBytes(b.buf, v)
+	return nil
+}
+
+// EncodeStringBytes appends a length-prefixed raw bytes to the buffer.
+// It does not validate whether v contains valid UTF-8.
+func (b *Buffer) EncodeStringBytes(v string) error {
+	b.buf = protowire.AppendString(b.buf, v)
+	return nil
+}
+
+// EncodeMessage appends a length-prefixed encoded message to the buffer.
+func (b *Buffer) EncodeMessage(m Message) error {
+	var err error
+	b.buf = protowire.AppendVarint(b.buf, uint64(Size(m)))
+	b.buf, err = marshalAppend(b.buf, m, b.deterministic)
+	return err
+}
+
+// DecodeVarint consumes an encoded unsigned varint from the buffer.
+func (b *Buffer) DecodeVarint() (uint64, error) {
+	v, n := protowire.ConsumeVarint(b.buf[b.idx:])
+	if n < 0 {
+		return 0, protowire.ParseError(n)
+	}
+	b.idx += n
+	return uint64(v), nil
+}
+
+// DecodeZigzag32 consumes an encoded 32-bit zig-zag varint from the buffer.
+func (b *Buffer) DecodeZigzag32() (uint64, error) {
+	v, err := b.DecodeVarint()
+	if err != nil {
+		return 0, err
+	}
+	return uint64((uint32(v) >> 1) ^ uint32((int32(v&1)<<31)>>31)), nil
+}
+
+// DecodeZigzag64 consumes an encoded 64-bit zig-zag varint from the buffer.
+func (b *Buffer) DecodeZigzag64() (uint64, error) {
+	v, err := b.DecodeVarint()
+	if err != nil {
+		return 0, err
+	}
+	return uint64((uint64(v) >> 1) ^ uint64((int64(v&1)<<63)>>63)), nil
+}
+
+// DecodeFixed32 consumes a 32-bit little-endian integer from the buffer.
+func (b *Buffer) DecodeFixed32() (uint64, error) {
+	v, n := protowire.ConsumeFixed32(b.buf[b.idx:])
+	if n < 0 {
+		return 0, protowire.ParseError(n)
+	}
+	b.idx += n
+	return uint64(v), nil
+}
+
+// DecodeFixed64 consumes a 64-bit little-endian integer from the buffer.
+func (b *Buffer) DecodeFixed64() (uint64, error) {
+	v, n := protowire.ConsumeFixed64(b.buf[b.idx:])
+	if n < 0 {
+		return 0, protowire.ParseError(n)
+	}
+	b.idx += n
+	return uint64(v), nil
+}
+
+// DecodeRawBytes consumes a length-prefixed raw bytes from the buffer.
+// If alloc is specified, it returns a copy the raw bytes
+// rather than a sub-slice of the buffer.
+func (b *Buffer) DecodeRawBytes(alloc bool) ([]byte, error) {
+	v, n := protowire.ConsumeBytes(b.buf[b.idx:])
+	if n < 0 {
+		return nil, protowire.ParseError(n)
+	}
+	b.idx += n
+	if alloc {
+		v = append([]byte(nil), v...)
+	}
+	return v, nil
+}
+
+// DecodeStringBytes consumes a length-prefixed raw bytes from the buffer.
+// It does not validate whether the raw bytes contain valid UTF-8.
+func (b *Buffer) DecodeStringBytes() (string, error) {
+	v, n := protowire.ConsumeString(b.buf[b.idx:])
+	if n < 0 {
+		return "", protowire.ParseError(n)
+	}
+	b.idx += n
+	return v, nil
+}
+
+// DecodeMessage consumes a length-prefixed message from the buffer.
+// It does not reset m before unmarshaling.
+func (b *Buffer) DecodeMessage(m Message) error {
+	v, err := b.DecodeRawBytes(false)
+	if err != nil {
+		return err
+	}
+	return UnmarshalMerge(v, m)
+}
+
+// DecodeGroup consumes a message group from the buffer.
+// It assumes that the start group marker has already been consumed and
+// consumes all bytes until (and including the end group marker).
+// It does not reset m before unmarshaling.
+func (b *Buffer) DecodeGroup(m Message) error {
+	v, n, err := consumeGroup(b.buf[b.idx:])
+	if err != nil {
+		return err
+	}
+	b.idx += n
+	return UnmarshalMerge(v, m)
+}
+
+// consumeGroup parses b until it finds an end group marker, returning
+// the raw bytes of the message (excluding the end group marker) and the
+// the total length of the message (including the end group marker).
+func consumeGroup(b []byte) ([]byte, int, error) {
+	b0 := b
+	depth := 1 // assume this follows a start group marker
+	for {
+		_, wtyp, tagLen := protowire.ConsumeTag(b)
+		if tagLen < 0 {
+			return nil, 0, protowire.ParseError(tagLen)
+		}
+		b = b[tagLen:]
+
+		var valLen int
+		switch wtyp {
+		case protowire.VarintType:
+			_, valLen = protowire.ConsumeVarint(b)
+		case protowire.Fixed32Type:
+			_, valLen = protowire.ConsumeFixed32(b)
+		case protowire.Fixed64Type:
+			_, valLen = protowire.ConsumeFixed64(b)
+		case protowire.BytesType:
+			_, valLen = protowire.ConsumeBytes(b)
+		case protowire.StartGroupType:
+			depth++
+		case protowire.EndGroupType:
+			depth--
+		default:
+			return nil, 0, errors.New("proto: cannot parse reserved wire type")
+		}
+		if valLen < 0 {
+			return nil, 0, protowire.ParseError(valLen)
+		}
+		b = b[valLen:]
+
+		if depth == 0 {
+			return b0[:len(b0)-len(b)-tagLen], len(b0) - len(b), nil
+		}
+	}
+}

vendor/github.com/golang/protobuf/proto/defaults.go

@@ -0,0 +1,63 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	"google.golang.org/protobuf/reflect/protoreflect"
+)
+
+// SetDefaults sets unpopulated scalar fields to their default values.
+// Fields within a oneof are not set even if they have a default value.
+// SetDefaults is recursively called upon any populated message fields.
+func SetDefaults(m Message) {
+	if m != nil {
+		setDefaults(MessageReflect(m))
+	}
+}
+
+func setDefaults(m protoreflect.Message) {
+	fds := m.Descriptor().Fields()
+	for i := 0; i < fds.Len(); i++ {
+		fd := fds.Get(i)
+		if !m.Has(fd) {
+			if fd.HasDefault() && fd.ContainingOneof() == nil {
+				v := fd.Default()
+				if fd.Kind() == protoreflect.BytesKind {
+					v = protoreflect.ValueOf(append([]byte(nil), v.Bytes()...)) // copy the default bytes
+				}
+				m.Set(fd, v)
+			}
+			continue
+		}
+	}
+
+	m.Range(func(fd protoreflect.FieldDescriptor, v protoreflect.Value) bool {
+		switch {
+		// Handle singular message.
+		case fd.Cardinality() != protoreflect.Repeated:
+			if fd.Message() != nil {
+				setDefaults(m.Get(fd).Message())
+			}
+		// Handle list of messages.
+		case fd.IsList():
+			if fd.Message() != nil {
+				ls := m.Get(fd).List()
+				for i := 0; i < ls.Len(); i++ {
+					setDefaults(ls.Get(i).Message())
+				}
+			}
+		// Handle map of messages.
+		case fd.IsMap():
+			if fd.MapValue().Message() != nil {
+				ms := m.Get(fd).Map()
+				ms.Range(func(_ protoreflect.MapKey, v protoreflect.Value) bool {
+					setDefaults(v.Message())
+					return true
+				})
+			}
+		}
+		return true
+	})
+}

vendor/github.com/golang/protobuf/proto/deprecated.go

@@ -0,0 +1,113 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	"encoding/json"
+	"errors"
+	"fmt"
+	"strconv"
+
+	protoV2 "google.golang.org/protobuf/proto"
+)
+
+var (
+	// Deprecated: No longer returned.
+	ErrNil = errors.New("proto: Marshal called with nil")
+
+	// Deprecated: No longer returned.
+	ErrTooLarge = errors.New("proto: message encodes to over 2 GB")
+
+	// Deprecated: No longer returned.
+	ErrInternalBadWireType = errors.New("proto: internal error: bad wiretype for oneof")
+)
+
+// Deprecated: Do not use.
+type Stats struct{ Emalloc, Dmalloc, Encode, Decode, Chit, Cmiss, Size uint64 }
+
+// Deprecated: Do not use.
+func GetStats() Stats { return Stats{} }
+
+// Deprecated: Do not use.
+func MarshalMessageSet(interface{}) ([]byte, error) {
+	return nil, errors.New("proto: not implemented")
+}
+
+// Deprecated: Do not use.
+func UnmarshalMessageSet([]byte, interface{}) error {
+	return errors.New("proto: not implemented")
+}
+
+// Deprecated: Do not use.
+func MarshalMessageSetJSON(interface{}) ([]byte, error) {
+	return nil, errors.New("proto: not implemented")
+}
+
+// Deprecated: Do not use.
+func UnmarshalMessageSetJSON([]byte, interface{}) error {
+	return errors.New("proto: not implemented")
+}
+
+// Deprecated: Do not use.
+func RegisterMessageSetType(Message, int32, string) {}
+
+// Deprecated: Do not use.
+func EnumName(m map[int32]string, v int32) string {
+	s, ok := m[v]
+	if ok {
+		return s
+	}
+	return strconv.Itoa(int(v))
+}
+
+// Deprecated: Do not use.
+func UnmarshalJSONEnum(m map[string]int32, data []byte, enumName string) (int32, error) {
+	if data[0] == '"' {
+		// New style: enums are strings.
+		var repr string
+		if err := json.Unmarshal(data, &repr); err != nil {
+			return -1, err
+		}
+		val, ok := m[repr]
+		if !ok {
+			return 0, fmt.Errorf("unrecognized enum %s value %q", enumName, repr)
+		}
+		return val, nil
+	}
+	// Old style: enums are ints.
+	var val int32
+	if err := json.Unmarshal(data, &val); err != nil {
+		return 0, fmt.Errorf("cannot unmarshal %#q into enum %s", data, enumName)
+	}
+	return val, nil
+}
+
+// Deprecated: Do not use; this type existed for intenal-use only.
+type InternalMessageInfo struct{}
+
+// Deprecated: Do not use; this method existed for intenal-use only.
+func (*InternalMessageInfo) DiscardUnknown(m Message) {
+	DiscardUnknown(m)
+}
+
+// Deprecated: Do not use; this method existed for intenal-use only.
+func (*InternalMessageInfo) Marshal(b []byte, m Message, deterministic bool) ([]byte, error) {
+	return protoV2.MarshalOptions{Deterministic: deterministic}.MarshalAppend(b, MessageV2(m))
+}
+
+// Deprecated: Do not use; this method existed for intenal-use only.
+func (*InternalMessageInfo) Merge(dst, src Message) {
+	protoV2.Merge(MessageV2(dst), MessageV2(src))
+}
+
+// Deprecated: Do not use; this method existed for intenal-use only.
+func (*InternalMessageInfo) Size(m Message) int {
+	return protoV2.Size(MessageV2(m))
+}
+
+// Deprecated: Do not use; this method existed for intenal-use only.
+func (*InternalMessageInfo) Unmarshal(m Message, b []byte) error {
+	return protoV2.UnmarshalOptions{Merge: true}.Unmarshal(b, MessageV2(m))
+}

vendor/github.com/golang/protobuf/proto/discard.go

@@ -0,0 +1,58 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	"google.golang.org/protobuf/reflect/protoreflect"
+)
+
+// DiscardUnknown recursively discards all unknown fields from this message
+// and all embedded messages.
+//
+// When unmarshaling a message with unrecognized fields, the tags and values
+// of such fields are preserved in the Message. This allows a later call to
+// marshal to be able to produce a message that continues to have those
+// unrecognized fields. To avoid this, DiscardUnknown is used to
+// explicitly clear the unknown fields after unmarshaling.
+func DiscardUnknown(m Message) {
+	if m != nil {
+		discardUnknown(MessageReflect(m))
+	}
+}
+
+func discardUnknown(m protoreflect.Message) {
+	m.Range(func(fd protoreflect.FieldDescriptor, val protoreflect.Value) bool {
+		switch {
+		// Handle singular message.
+		case fd.Cardinality() != protoreflect.Repeated:
+			if fd.Message() != nil {
+				discardUnknown(m.Get(fd).Message())
+			}
+		// Handle list of messages.
+		case fd.IsList():
+			if fd.Message() != nil {
+				ls := m.Get(fd).List()
+				for i := 0; i < ls.Len(); i++ {
+					discardUnknown(ls.Get(i).Message())
+				}
+			}
+		// Handle map of messages.
+		case fd.IsMap():
+			if fd.MapValue().Message() != nil {
+				ms := m.Get(fd).Map()
+				ms.Range(func(_ protoreflect.MapKey, v protoreflect.Value) bool {
+					discardUnknown(v.Message())
+					return true
+				})
+			}
+		}
+		return true
+	})
+
+	// Discard unknown fields.
+	if len(m.GetUnknown()) > 0 {
+		m.SetUnknown(nil)
+	}
+}

vendor/github.com/golang/protobuf/proto/extensions.go

@@ -0,0 +1,356 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	"errors"
+	"fmt"
+	"reflect"
+
+	"google.golang.org/protobuf/encoding/protowire"
+	"google.golang.org/protobuf/proto"
+	"google.golang.org/protobuf/reflect/protoreflect"
+	"google.golang.org/protobuf/reflect/protoregistry"
+	"google.golang.org/protobuf/runtime/protoiface"
+	"google.golang.org/protobuf/runtime/protoimpl"
+)
+
+type (
+	// ExtensionDesc represents an extension descriptor and
+	// is used to interact with an extension field in a message.
+	//
+	// Variables of this type are generated in code by protoc-gen-go.
+	ExtensionDesc = protoimpl.ExtensionInfo
+
+	// ExtensionRange represents a range of message extensions.
+	// Used in code generated by protoc-gen-go.
+	ExtensionRange = protoiface.ExtensionRangeV1
+
+	// Deprecated: Do not use; this is an internal type.
+	Extension = protoimpl.ExtensionFieldV1
+
+	// Deprecated: Do not use; this is an internal type.
+	XXX_InternalExtensions = protoimpl.ExtensionFields
+)
+
+// ErrMissingExtension reports whether the extension was not present.
+var ErrMissingExtension = errors.New("proto: missing extension")
+
+var errNotExtendable = errors.New("proto: not an extendable proto.Message")
+
+// HasExtension reports whether the extension field is present in m
+// either as an explicitly populated field or as an unknown field.
+func HasExtension(m Message, xt *ExtensionDesc) (has bool) {
+	mr := MessageReflect(m)
+	if mr == nil || !mr.IsValid() {
+		return false
+	}
+
+	// Check whether any populated known field matches the field number.
+	xtd := xt.TypeDescriptor()
+	if isValidExtension(mr.Descriptor(), xtd) {
+		has = mr.Has(xtd)
+	} else {
+		mr.Range(func(fd protoreflect.FieldDescriptor, _ protoreflect.Value) bool {
+			has = int32(fd.Number()) == xt.Field
+			return !has
+		})
+	}
+
+	// Check whether any unknown field matches the field number.
+	for b := mr.GetUnknown(); !has && len(b) > 0; {
+		num, _, n := protowire.ConsumeField(b)
+		has = int32(num) == xt.Field
+		b = b[n:]
+	}
+	return has
+}
+
+// ClearExtension removes the extension field from m
+// either as an explicitly populated field or as an unknown field.
+func ClearExtension(m Message, xt *ExtensionDesc) {
+	mr := MessageReflect(m)
+	if mr == nil || !mr.IsValid() {
+		return
+	}
+
+	xtd := xt.TypeDescriptor()
+	if isValidExtension(mr.Descriptor(), xtd) {
+		mr.Clear(xtd)
+	} else {
+		mr.Range(func(fd protoreflect.FieldDescriptor, _ protoreflect.Value) bool {
+			if int32(fd.Number()) == xt.Field {
+				mr.Clear(fd)
+				return false
+			}
+			return true
+		})
+	}
+	clearUnknown(mr, fieldNum(xt.Field))
+}
+
+// ClearAllExtensions clears all extensions from m.
+// This includes populated fields and unknown fields in the extension range.
+func ClearAllExtensions(m Message) {
+	mr := MessageReflect(m)
+	if mr == nil || !mr.IsValid() {
+		return
+	}
+
+	mr.Range(func(fd protoreflect.FieldDescriptor, _ protoreflect.Value) bool {
+		if fd.IsExtension() {
+			mr.Clear(fd)
+		}
+		return true
+	})
+	clearUnknown(mr, mr.Descriptor().ExtensionRanges())
+}
+
+// GetExtension retrieves a proto2 extended field from m.
+//
+// If the descriptor is type complete (i.e., ExtensionDesc.ExtensionType is non-nil),
+// then GetExtension parses the encoded field and returns a Go value of the specified type.
+// If the field is not present, then the default value is returned (if one is specified),
+// otherwise ErrMissingExtension is reported.
+//
+// If the descriptor is type incomplete (i.e., ExtensionDesc.ExtensionType is nil),
+// then GetExtension returns the raw encoded bytes for the extension field.
+func GetExtension(m Message, xt *ExtensionDesc) (interface{}, error) {
+	mr := MessageReflect(m)
+	if mr == nil || !mr.IsValid() || mr.Descriptor().ExtensionRanges().Len() == 0 {
+		return nil, errNotExtendable
+	}
+
+	// Retrieve the unknown fields for this extension field.
+	var bo protoreflect.RawFields
+	for bi := mr.GetUnknown(); len(bi) > 0; {
+		num, _, n := protowire.ConsumeField(bi)
+		if int32(num) == xt.Field {
+			bo = append(bo, bi[:n]...)
+		}
+		bi = bi[n:]
+	}
+
+	// For type incomplete descriptors, only retrieve the unknown fields.
+	if xt.ExtensionType == nil {
+		return []byte(bo), nil
+	}
+
+	// If the extension field only exists as unknown fields, unmarshal it.
+	// This is rarely done since proto.Unmarshal eagerly unmarshals extensions.
+	xtd := xt.TypeDescriptor()
+	if !isValidExtension(mr.Descriptor(), xtd) {
+		return nil, fmt.Errorf("proto: bad extended type; %T does not extend %T", xt.ExtendedType, m)
+	}
+	if !mr.Has(xtd) && len(bo) > 0 {
+		m2 := mr.New()
+		if err := (proto.UnmarshalOptions{
+			Resolver: extensionResolver{xt},
+		}.Unmarshal(bo, m2.Interface())); err != nil {
+			return nil, err
+		}
+		if m2.Has(xtd) {
+			mr.Set(xtd, m2.Get(xtd))
+			clearUnknown(mr, fieldNum(xt.Field))
+		}
+	}
+
+	// Check whether the message has the extension field set or a default.
+	var pv protoreflect.Value
+	switch {
+	case mr.Has(xtd):
+		pv = mr.Get(xtd)
+	case xtd.HasDefault():
+		pv = xtd.Default()
+	default:
+		return nil, ErrMissingExtension
+	}
+
+	v := xt.InterfaceOf(pv)
+	rv := reflect.ValueOf(v)
+	if isScalarKind(rv.Kind()) {
+		rv2 := reflect.New(rv.Type())
+		rv2.Elem().Set(rv)
+		v = rv2.Interface()
+	}
+	return v, nil
+}
+
+// extensionResolver is a custom extension resolver that stores a single
+// extension type that takes precedence over the global registry.
+type extensionResolver struct{ xt protoreflect.ExtensionType }
+
+func (r extensionResolver) FindExtensionByName(field protoreflect.FullName) (protoreflect.ExtensionType, error) {
+	if xtd := r.xt.TypeDescriptor(); xtd.FullName() == field {
+		return r.xt, nil
+	}
+	return protoregistry.GlobalTypes.FindExtensionByName(field)
+}
+
+func (r extensionResolver) FindExtensionByNumber(message protoreflect.FullName, field protoreflect.FieldNumber) (protoreflect.ExtensionType, error) {
+	if xtd := r.xt.TypeDescriptor(); xtd.ContainingMessage().FullName() == message && xtd.Number() == field {
+		return r.xt, nil
+	}
+	return protoregistry.GlobalTypes.FindExtensionByNumber(message, field)
+}
+
+// GetExtensions returns a list of the extensions values present in m,
+// corresponding with the provided list of extension descriptors, xts.
+// If an extension is missing in m, the corresponding value is nil.
+func GetExtensions(m Message, xts []*ExtensionDesc) ([]interface{}, error) {
+	mr := MessageReflect(m)
+	if mr == nil || !mr.IsValid() {
+		return nil, errNotExtendable
+	}
+
+	vs := make([]interface{}, len(xts))
+	for i, xt := range xts {
+		v, err := GetExtension(m, xt)
+		if err != nil {
+			if err == ErrMissingExtension {
+				continue
+			}
+			return vs, err
+		}
+		vs[i] = v
+	}
+	return vs, nil
+}
+
+// SetExtension sets an extension field in m to the provided value.
+func SetExtension(m Message, xt *ExtensionDesc, v interface{}) error {
+	mr := MessageReflect(m)
+	if mr == nil || !mr.IsValid() || mr.Descriptor().ExtensionRanges().Len() == 0 {
+		return errNotExtendable
+	}
+
+	rv := reflect.ValueOf(v)
+	if reflect.TypeOf(v) != reflect.TypeOf(xt.ExtensionType) {
+		return fmt.Errorf("proto: bad extension value type. got: %T, want: %T", v, xt.ExtensionType)
+	}
+	if rv.Kind() == reflect.Ptr {
+		if rv.IsNil() {
+			return fmt.Errorf("proto: SetExtension called with nil value of type %T", v)
+		}
+		if isScalarKind(rv.Elem().Kind()) {
+			v = rv.Elem().Interface()
+		}
+	}
+
+	xtd := xt.TypeDescriptor()
+	if !isValidExtension(mr.Descriptor(), xtd) {
+		return fmt.Errorf("proto: bad extended type; %T does not extend %T", xt.ExtendedType, m)
+	}
+	mr.Set(xtd, xt.ValueOf(v))
+	clearUnknown(mr, fieldNum(xt.Field))
+	return nil
+}
+
+// SetRawExtension inserts b into the unknown fields of m.
+//
+// Deprecated: Use Message.ProtoReflect.SetUnknown instead.
+func SetRawExtension(m Message, fnum int32, b []byte) {
+	mr := MessageReflect(m)
+	if mr == nil || !mr.IsValid() {
+		return
+	}
+
+	// Verify that the raw field is valid.
+	for b0 := b; len(b0) > 0; {
+		num, _, n := protowire.ConsumeField(b0)
+		if int32(num) != fnum {
+			panic(fmt.Sprintf("mismatching field number: got %d, want %d", num, fnum))
+		}
+		b0 = b0[n:]
+	}
+
+	ClearExtension(m, &ExtensionDesc{Field: fnum})
+	mr.SetUnknown(append(mr.GetUnknown(), b...))
+}
+
+// ExtensionDescs returns a list of extension descriptors found in m,
+// containing descriptors for both populated extension fields in m and
+// also unknown fields of m that are in the extension range.
+// For the later case, an type incomplete descriptor is provided where only
+// the ExtensionDesc.Field field is populated.
+// The order of the extension descriptors is undefined.
+func ExtensionDescs(m Message) ([]*ExtensionDesc, error) {
+	mr := MessageReflect(m)
+	if mr == nil || !mr.IsValid() || mr.Descriptor().ExtensionRanges().Len() == 0 {
+		return nil, errNotExtendable
+	}
+
+	// Collect a set of known extension descriptors.
+	extDescs := make(map[protoreflect.FieldNumber]*ExtensionDesc)
+	mr.Range(func(fd protoreflect.FieldDescriptor, v protoreflect.Value) bool {
+		if fd.IsExtension() {
+			xt := fd.(protoreflect.ExtensionTypeDescriptor)
+			if xd, ok := xt.Type().(*ExtensionDesc); ok {
+				extDescs[fd.Number()] = xd
+			}
+		}
+		return true
+	})
+
+	// Collect a set of unknown extension descriptors.
+	extRanges := mr.Descriptor().ExtensionRanges()
+	for b := mr.GetUnknown(); len(b) > 0; {
+		num, _, n := protowire.ConsumeField(b)
+		if extRanges.Has(num) && extDescs[num] == nil {
+			extDescs[num] = nil
+		}
+		b = b[n:]
+	}
+
+	// Transpose the set of descriptors into a list.
+	var xts []*ExtensionDesc
+	for num, xt := range extDescs {
+		if xt == nil {
+			xt = &ExtensionDesc{Field: int32(num)}
+		}
+		xts = append(xts, xt)
+	}
+	return xts, nil
+}
+
+// isValidExtension reports whether xtd is a valid extension descriptor for md.
+func isValidExtension(md protoreflect.MessageDescriptor, xtd protoreflect.ExtensionTypeDescriptor) bool {
+	return xtd.ContainingMessage() == md && md.ExtensionRanges().Has(xtd.Number())
+}
+
+// isScalarKind reports whether k is a protobuf scalar kind (except bytes).
+// This function exists for historical reasons since the representation of
+// scalars differs between v1 and v2, where v1 uses *T and v2 uses T.
+func isScalarKind(k reflect.Kind) bool {
+	switch k {
+	case reflect.Bool, reflect.Int32, reflect.Int64, reflect.Uint32, reflect.Uint64, reflect.Float32, reflect.Float64, reflect.String:
+		return true
+	default:
+		return false
+	}
+}
+
+// clearUnknown removes unknown fields from m where remover.Has reports true.
+func clearUnknown(m protoreflect.Message, remover interface {
+	Has(protoreflect.FieldNumber) bool
+}) {
+	var bo protoreflect.RawFields
+	for bi := m.GetUnknown(); len(bi) > 0; {
+		num, _, n := protowire.ConsumeField(bi)
+		if !remover.Has(num) {
+			bo = append(bo, bi[:n]...)
+		}
+		bi = bi[n:]
+	}
+	if bi := m.GetUnknown(); len(bi) != len(bo) {
+		m.SetUnknown(bo)
+	}
+}
+
+type fieldNum protoreflect.FieldNumber
+
+func (n1 fieldNum) Has(n2 protoreflect.FieldNumber) bool {
+	return protoreflect.FieldNumber(n1) == n2
+}

vendor/github.com/golang/protobuf/proto/properties.go

@@ -0,0 +1,306 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	"fmt"
+	"reflect"
+	"strconv"
+	"strings"
+	"sync"
+
+	"google.golang.org/protobuf/reflect/protoreflect"
+	"google.golang.org/protobuf/runtime/protoimpl"
+)
+
+// StructProperties represents protocol buffer type information for a
+// generated protobuf message in the open-struct API.
+//
+// Deprecated: Do not use.
+type StructProperties struct {
+	// Prop are the properties for each field.
+	//
+	// Fields belonging to a oneof are stored in OneofTypes instead, with a
+	// single Properties representing the parent oneof held here.
+	//
+	// The order of Prop matches the order of fields in the Go struct.
+	// Struct fields that are not related to protobufs have a "XXX_" prefix
+	// in the Properties.Name and must be ignored by the user.
+	Prop []*Properties
+
+	// OneofTypes contains information about the oneof fields in this message.
+	// It is keyed by the protobuf field name.
+	OneofTypes map[string]*OneofProperties
+}
+
+// Properties represents the type information for a protobuf message field.
+//
+// Deprecated: Do not use.
+type Properties struct {
+	// Name is a placeholder name with little meaningful semantic value.
+	// If the name has an "XXX_" prefix, the entire Properties must be ignored.
+	Name string
+	// OrigName is the protobuf field name or oneof name.
+	OrigName string
+	// JSONName is the JSON name for the protobuf field.
+	JSONName string
+	// Enum is a placeholder name for enums.
+	// For historical reasons, this is neither the Go name for the enum,
+	// nor the protobuf name for the enum.
+	Enum string // Deprecated: Do not use.
+	// Weak contains the full name of the weakly referenced message.
+	Weak string
+	// Wire is a string representation of the wire type.
+	Wire string
+	// WireType is the protobuf wire type for the field.
+	WireType int
+	// Tag is the protobuf field number.
+	Tag int
+	// Required reports whether this is a required field.
+	Required bool
+	// Optional reports whether this is a optional field.
+	Optional bool
+	// Repeated reports whether this is a repeated field.
+	Repeated bool
+	// Packed reports whether this is a packed repeated field of scalars.
+	Packed bool
+	// Proto3 reports whether this field operates under the proto3 syntax.
+	Proto3 bool
+	// Oneof reports whether this field belongs within a oneof.
+	Oneof bool
+
+	// Default is the default value in string form.
+	Default string
+	// HasDefault reports whether the field has a default value.
+	HasDefault bool
+
+	// MapKeyProp is the properties for the key field for a map field.
+	MapKeyProp *Properties
+	// MapValProp is the properties for the value field for a map field.
+	MapValProp *Properties
+}
+
+// OneofProperties represents the type information for a protobuf oneof.
+//
+// Deprecated: Do not use.
+type OneofProperties struct {
+	// Type is a pointer to the generated wrapper type for the field value.
+	// This is nil for messages that are not in the open-struct API.
+	Type reflect.Type
+	// Field is the index into StructProperties.Prop for the containing oneof.
+	Field int
+	// Prop is the properties for the field.
+	Prop *Properties
+}
+
+// String formats the properties in the protobuf struct field tag style.
+func (p *Properties) String() string {
+	s := p.Wire
+	s += "," + strconv.Itoa(p.Tag)
+	if p.Required {
+		s += ",req"
+	}
+	if p.Optional {
+		s += ",opt"
+	}
+	if p.Repeated {
+		s += ",rep"
+	}
+	if p.Packed {
+		s += ",packed"
+	}
+	s += ",name=" + p.OrigName
+	if p.JSONName != "" {
+		s += ",json=" + p.JSONName
+	}
+	if len(p.Enum) > 0 {
+		s += ",enum=" + p.Enum
+	}
+	if len(p.Weak) > 0 {
+		s += ",weak=" + p.Weak
+	}
+	if p.Proto3 {
+		s += ",proto3"
+	}
+	if p.Oneof {
+		s += ",oneof"
+	}
+	if p.HasDefault {
+		s += ",def=" + p.Default
+	}
+	return s
+}
+
+// Parse populates p by parsing a string in the protobuf struct field tag style.
+func (p *Properties) Parse(tag string) {
+	// For example: "bytes,49,opt,name=foo,def=hello!"
+	for len(tag) > 0 {
+		i := strings.IndexByte(tag, ',')
+		if i < 0 {
+			i = len(tag)
+		}
+		switch s := tag[:i]; {
+		case strings.HasPrefix(s, "name="):
+			p.OrigName = s[len("name="):]
+		case strings.HasPrefix(s, "json="):
+			p.JSONName = s[len("json="):]
+		case strings.HasPrefix(s, "enum="):
+			p.Enum = s[len("enum="):]
+		case strings.HasPrefix(s, "weak="):
+			p.Weak = s[len("weak="):]
+		case strings.Trim(s, "0123456789") == "":
+			n, _ := strconv.ParseUint(s, 10, 32)
+			p.Tag = int(n)
+		case s == "opt":
+			p.Optional = true
+		case s == "req":
+			p.Required = true
+		case s == "rep":
+			p.Repeated = true
+		case s == "varint" || s == "zigzag32" || s == "zigzag64":
+			p.Wire = s
+			p.WireType = WireVarint
+		case s == "fixed32":
+			p.Wire = s
+			p.WireType = WireFixed32
+		case s == "fixed64":
+			p.Wire = s
+			p.WireType = WireFixed64
+		case s == "bytes":
+			p.Wire = s
+			p.WireType = WireBytes
+		case s == "group":
+			p.Wire = s
+			p.WireType = WireStartGroup
+		case s == "packed":
+			p.Packed = true
+		case s == "proto3":
+			p.Proto3 = true
+		case s == "oneof":
+			p.Oneof = true
+		case strings.HasPrefix(s, "def="):
+			// The default tag is special in that everything afterwards is the
+			// default regardless of the presence of commas.
+			p.HasDefault = true
+			p.Default, i = tag[len("def="):], len(tag)
+		}
+		tag = strings.TrimPrefix(tag[i:], ",")
+	}
+}
+
+// Init populates the properties from a protocol buffer struct tag.
+//
+// Deprecated: Do not use.
+func (p *Properties) Init(typ reflect.Type, name, tag string, f *reflect.StructField) {
+	p.Name = name
+	p.OrigName = name
+	if tag == "" {
+		return
+	}
+	p.Parse(tag)
+
+	if typ != nil && typ.Kind() == reflect.Map {
+		p.MapKeyProp = new(Properties)
+		p.MapKeyProp.Init(nil, "Key", f.Tag.Get("protobuf_key"), nil)
+		p.MapValProp = new(Properties)
+		p.MapValProp.Init(nil, "Value", f.Tag.Get("protobuf_val"), nil)
+	}
+}
+
+var propertiesCache sync.Map // map[reflect.Type]*StructProperties
+
+// GetProperties returns the list of properties for the type represented by t,
+// which must be a generated protocol buffer message in the open-struct API,
+// where protobuf message fields are represented by exported Go struct fields.
+//
+// Deprecated: Use protobuf reflection instead.
+func GetProperties(t reflect.Type) *StructProperties {
+	if p, ok := propertiesCache.Load(t); ok {
+		return p.(*StructProperties)
+	}
+	p, _ := propertiesCache.LoadOrStore(t, newProperties(t))
+	return p.(*StructProperties)
+}
+
+func newProperties(t reflect.Type) *StructProperties {
+	if t.Kind() != reflect.Struct {
+		panic(fmt.Sprintf("%v is not a generated message in the open-struct API", t))
+	}
+
+	var hasOneof bool
+	prop := new(StructProperties)
+
+	// Construct a list of properties for each field in the struct.
+	for i := 0; i < t.NumField(); i++ {
+		p := new(Properties)
+		f := t.Field(i)
+		tagField := f.Tag.Get("protobuf")
+		p.Init(f.Type, f.Name, tagField, &f)
+
+		tagOneof := f.Tag.Get("protobuf_oneof")
+		if tagOneof != "" {
+			hasOneof = true
+			p.OrigName = tagOneof
+		}
+
+		// Rename unrelated struct fields with the "XXX_" prefix since so much
+		// user code simply checks for this to exclude special fields.
+		if tagField == "" && tagOneof == "" && !strings.HasPrefix(p.Name, "XXX_") {
+			p.Name = "XXX_" + p.Name
+			p.OrigName = "XXX_" + p.OrigName
+		} else if p.Weak != "" {
+			p.Name = p.OrigName // avoid possible "XXX_" prefix on weak field
+		}
+
+		prop.Prop = append(prop.Prop, p)
+	}
+
+	// Construct a mapping of oneof field names to properties.
+	if hasOneof {
+		var oneofWrappers []interface{}
+		if fn, ok := reflect.PtrTo(t).MethodByName("XXX_OneofFuncs"); ok {
+			oneofWrappers = fn.Func.Call([]reflect.Value{reflect.Zero(fn.Type.In(0))})[3].Interface().([]interface{})
+		}
+		if fn, ok := reflect.PtrTo(t).MethodByName("XXX_OneofWrappers"); ok {
+			oneofWrappers = fn.Func.Call([]reflect.Value{reflect.Zero(fn.Type.In(0))})[0].Interface().([]interface{})
+		}
+		if m, ok := reflect.Zero(reflect.PtrTo(t)).Interface().(protoreflect.ProtoMessage); ok {
+			if m, ok := m.ProtoReflect().(interface{ ProtoMessageInfo() *protoimpl.MessageInfo }); ok {
+				oneofWrappers = m.ProtoMessageInfo().OneofWrappers
+			}
+		}
+
+		prop.OneofTypes = make(map[string]*OneofProperties)
+		for _, wrapper := range oneofWrappers {
+			p := &OneofProperties{
+				Type: reflect.ValueOf(wrapper).Type(), // *T
+				Prop: new(Properties),
+			}
+			f := p.Type.Elem().Field(0)
+			p.Prop.Name = f.Name
+			p.Prop.Parse(f.Tag.Get("protobuf"))
+
+			// Determine the struct field that contains this oneof.
+			// Each wrapper is assignable to exactly one parent field.
+			var foundOneof bool
+			for i := 0; i < t.NumField() && !foundOneof; i++ {
+				if p.Type.AssignableTo(t.Field(i).Type) {
+					p.Field = i
+					foundOneof = true
+				}
+			}
+			if !foundOneof {
+				panic(fmt.Sprintf("%v is not a generated message in the open-struct API", t))
+			}
+			prop.OneofTypes[p.Prop.OrigName] = p
+		}
+	}
+
+	return prop
+}
+
+func (sp *StructProperties) Len() int           { return len(sp.Prop) }
+func (sp *StructProperties) Less(i, j int) bool { return false }
+func (sp *StructProperties) Swap(i, j int)      { return }

vendor/github.com/golang/protobuf/proto/proto.go

@@ -0,0 +1,167 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package proto provides functionality for handling protocol buffer messages.
+// In particular, it provides marshaling and unmarshaling between a protobuf
+// message and the binary wire format.
+//
+// See https://developers.google.com/protocol-buffers/docs/gotutorial for
+// more information.
+//
+// Deprecated: Use the "google.golang.org/protobuf/proto" package instead.
+package proto
+
+import (
+	protoV2 "google.golang.org/protobuf/proto"
+	"google.golang.org/protobuf/reflect/protoreflect"
+	"google.golang.org/protobuf/runtime/protoiface"
+	"google.golang.org/protobuf/runtime/protoimpl"
+)
+
+const (
+	ProtoPackageIsVersion1 = true
+	ProtoPackageIsVersion2 = true
+	ProtoPackageIsVersion3 = true
+	ProtoPackageIsVersion4 = true
+)
+
+// GeneratedEnum is any enum type generated by protoc-gen-go
+// which is a named int32 kind.
+// This type exists for documentation purposes.
+type GeneratedEnum interface{}
+
+// GeneratedMessage is any message type generated by protoc-gen-go
+// which is a pointer to a named struct kind.
+// This type exists for documentation purposes.
+type GeneratedMessage interface{}
+
+// Message is a protocol buffer message.
+//
+// This is the v1 version of the message interface and is marginally better
+// than an empty interface as it lacks any method to programatically interact
+// with the contents of the message.
+//
+// A v2 message is declared in "google.golang.org/protobuf/proto".Message and
+// exposes protobuf reflection as a first-class feature of the interface.
+//
+// To convert a v1 message to a v2 message, use the MessageV2 function.
+// To convert a v2 message to a v1 message, use the MessageV1 function.
+type Message = protoiface.MessageV1
+
+// MessageV1 converts either a v1 or v2 message to a v1 message.
+// It returns nil if m is nil.
+func MessageV1(m GeneratedMessage) protoiface.MessageV1 {
+	return protoimpl.X.ProtoMessageV1Of(m)
+}
+
+// MessageV2 converts either a v1 or v2 message to a v2 message.
+// It returns nil if m is nil.
+func MessageV2(m GeneratedMessage) protoV2.Message {
+	return protoimpl.X.ProtoMessageV2Of(m)
+}
+
+// MessageReflect returns a reflective view for a message.
+// It returns nil if m is nil.
+func MessageReflect(m Message) protoreflect.Message {
+	return protoimpl.X.MessageOf(m)
+}
+
+// Marshaler is implemented by messages that can marshal themselves.
+// This interface is used by the following functions: Size, Marshal,
+// Buffer.Marshal, and Buffer.EncodeMessage.
+//
+// Deprecated: Do not implement.
+type Marshaler interface {
+	// Marshal formats the encoded bytes of the message.
+	// It should be deterministic and emit valid protobuf wire data.
+	// The caller takes ownership of the returned buffer.
+	Marshal() ([]byte, error)
+}
+
+// Unmarshaler is implemented by messages that can unmarshal themselves.
+// This interface is used by the following functions: Unmarshal, UnmarshalMerge,
+// Buffer.Unmarshal, Buffer.DecodeMessage, and Buffer.DecodeGroup.
+//
+// Deprecated: Do not implement.
+type Unmarshaler interface {
+	// Unmarshal parses the encoded bytes of the protobuf wire input.
+	// The provided buffer is only valid for during method call.
+	// It should not reset the receiver message.
+	Unmarshal([]byte) error
+}
+
+// Merger is implemented by messages that can merge themselves.
+// This interface is used by the following functions: Clone and Merge.
+//
+// Deprecated: Do not implement.
+type Merger interface {
+	// Merge merges the contents of src into the receiver message.
+	// It clones all data structures in src such that it aliases no mutable
+	// memory referenced by src.
+	Merge(src Message)
+}
+
+// RequiredNotSetError is an error type returned when
+// marshaling or unmarshaling a message with missing required fields.
+type RequiredNotSetError struct {
+	err error
+}
+
+func (e *RequiredNotSetError) Error() string {
+	if e.err != nil {
+		return e.err.Error()
+	}
+	return "proto: required field not set"
+}
+func (e *RequiredNotSetError) RequiredNotSet() bool {
+	return true
+}
+
+func checkRequiredNotSet(m protoV2.Message) error {
+	if err := protoV2.CheckInitialized(m); err != nil {
+		return &RequiredNotSetError{err: err}
+	}
+	return nil
+}
+
+// Clone returns a deep copy of src.
+func Clone(src Message) Message {
+	return MessageV1(protoV2.Clone(MessageV2(src)))
+}
+
+// Merge merges src into dst, which must be messages of the same type.
+//
+// Populated scalar fields in src are copied to dst, while populated
+// singular messages in src are merged into dst by recursively calling Merge.
+// The elements of every list field in src is appended to the corresponded
+// list fields in dst. The entries of every map field in src is copied into
+// the corresponding map field in dst, possibly replacing existing entries.
+// The unknown fields of src are appended to the unknown fields of dst.
+func Merge(dst, src Message) {
+	protoV2.Merge(MessageV2(dst), MessageV2(src))
+}
+
+// Equal reports whether two messages are equal.
+// If two messages marshal to the same bytes under deterministic serialization,
+// then Equal is guaranteed to report true.
+//
+// Two messages are equal if they are the same protobuf message type,
+// have the same set of populated known and extension field values,
+// and the same set of unknown fields values.
+//
+// Scalar values are compared with the equivalent of the == operator in Go,
+// except bytes values which are compared using bytes.Equal and
+// floating point values which specially treat NaNs as equal.
+// Message values are compared by recursively calling Equal.
+// Lists are equal if each element value is also equal.
+// Maps are equal if they have the same set of keys, where the pair of values
+// for each key is also equal.
+func Equal(x, y Message) bool {
+	return protoV2.Equal(MessageV2(x), MessageV2(y))
+}
+
+func isMessageSet(md protoreflect.MessageDescriptor) bool {
+	ms, ok := md.(interface{ IsMessageSet() bool })
+	return ok && ms.IsMessageSet()
+}

vendor/github.com/golang/protobuf/proto/registry.go

@@ -0,0 +1,317 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	"bytes"
+	"compress/gzip"
+	"fmt"
+	"io/ioutil"
+	"reflect"
+	"strings"
+	"sync"
+
+	"google.golang.org/protobuf/reflect/protodesc"
+	"google.golang.org/protobuf/reflect/protoreflect"
+	"google.golang.org/protobuf/reflect/protoregistry"
+	"google.golang.org/protobuf/runtime/protoimpl"
+)
+
+// filePath is the path to the proto source file.
+type filePath = string // e.g., "google/protobuf/descriptor.proto"
+
+// fileDescGZIP is the compressed contents of the encoded FileDescriptorProto.
+type fileDescGZIP = []byte
+
+var fileCache sync.Map // map[filePath]fileDescGZIP
+
+// RegisterFile is called from generated code to register the compressed
+// FileDescriptorProto with the file path for a proto source file.
+//
+// Deprecated: Use protoregistry.GlobalFiles.RegisterFile instead.
+func RegisterFile(s filePath, d fileDescGZIP) {
+	// Decompress the descriptor.
+	zr, err := gzip.NewReader(bytes.NewReader(d))
+	if err != nil {
+		panic(fmt.Sprintf("proto: invalid compressed file descriptor: %v", err))
+	}
+	b, err := ioutil.ReadAll(zr)
+	if err != nil {
+		panic(fmt.Sprintf("proto: invalid compressed file descriptor: %v", err))
+	}
+
+	// Construct a protoreflect.FileDescriptor from the raw descriptor.
+	// Note that DescBuilder.Build automatically registers the constructed
+	// file descriptor with the v2 registry.
+	protoimpl.DescBuilder{RawDescriptor: b}.Build()
+
+	// Locally cache the raw descriptor form for the file.
+	fileCache.Store(s, d)
+}
+
+// FileDescriptor returns the compressed FileDescriptorProto given the file path
+// for a proto source file. It returns nil if not found.
+//
+// Deprecated: Use protoregistry.GlobalFiles.FindFileByPath instead.
+func FileDescriptor(s filePath) fileDescGZIP {
+	if v, ok := fileCache.Load(s); ok {
+		return v.(fileDescGZIP)
+	}
+
+	// Find the descriptor in the v2 registry.
+	var b []byte
+	if fd, _ := protoregistry.GlobalFiles.FindFileByPath(s); fd != nil {
+		b, _ = Marshal(protodesc.ToFileDescriptorProto(fd))
+	}
+
+	// Locally cache the raw descriptor form for the file.
+	if len(b) > 0 {
+		v, _ := fileCache.LoadOrStore(s, protoimpl.X.CompressGZIP(b))
+		return v.(fileDescGZIP)
+	}
+	return nil
+}
+
+// enumName is the name of an enum. For historical reasons, the enum name is
+// neither the full Go name nor the full protobuf name of the enum.
+// The name is the dot-separated combination of just the proto package that the
+// enum is declared within followed by the Go type name of the generated enum.
+type enumName = string // e.g., "my.proto.package.GoMessage_GoEnum"
+
+// enumsByName maps enum values by name to their numeric counterpart.
+type enumsByName = map[string]int32
+
+// enumsByNumber maps enum values by number to their name counterpart.
+type enumsByNumber = map[int32]string
+
+var enumCache sync.Map     // map[enumName]enumsByName
+var numFilesCache sync.Map // map[protoreflect.FullName]int
+
+// RegisterEnum is called from the generated code to register the mapping of
+// enum value names to enum numbers for the enum identified by s.
+//
+// Deprecated: Use protoregistry.GlobalTypes.RegisterEnum instead.
+func RegisterEnum(s enumName, _ enumsByNumber, m enumsByName) {
+	if _, ok := enumCache.Load(s); ok {
+		panic("proto: duplicate enum registered: " + s)
+	}
+	enumCache.Store(s, m)
+
+	// This does not forward registration to the v2 registry since this API
+	// lacks sufficient information to construct a complete v2 enum descriptor.
+}
+
+// EnumValueMap returns the mapping from enum value names to enum numbers for
+// the enum of the given name. It returns nil if not found.
+//
+// Deprecated: Use protoregistry.GlobalTypes.FindEnumByName instead.
+func EnumValueMap(s enumName) enumsByName {
+	if v, ok := enumCache.Load(s); ok {
+		return v.(enumsByName)
+	}
+
+	// Check whether the cache is stale. If the number of files in the current
+	// package differs, then it means that some enums may have been recently
+	// registered upstream that we do not know about.
+	var protoPkg protoreflect.FullName
+	if i := strings.LastIndexByte(s, '.'); i >= 0 {
+		protoPkg = protoreflect.FullName(s[:i])
+	}
+	v, _ := numFilesCache.Load(protoPkg)
+	numFiles, _ := v.(int)
+	if protoregistry.GlobalFiles.NumFilesByPackage(protoPkg) == numFiles {
+		return nil // cache is up-to-date; was not found earlier
+	}
+
+	// Update the enum cache for all enums declared in the given proto package.
+	numFiles = 0
+	protoregistry.GlobalFiles.RangeFilesByPackage(protoPkg, func(fd protoreflect.FileDescriptor) bool {
+		walkEnums(fd, func(ed protoreflect.EnumDescriptor) {
+			name := protoimpl.X.LegacyEnumName(ed)
+			if _, ok := enumCache.Load(name); !ok {
+				m := make(enumsByName)
+				evs := ed.Values()
+				for i := evs.Len() - 1; i >= 0; i-- {
+					ev := evs.Get(i)
+					m[string(ev.Name())] = int32(ev.Number())
+				}
+				enumCache.LoadOrStore(name, m)
+			}
+		})
+		numFiles++
+		return true
+	})
+	numFilesCache.Store(protoPkg, numFiles)
+
+	// Check cache again for enum map.
+	if v, ok := enumCache.Load(s); ok {
+		return v.(enumsByName)
+	}
+	return nil
+}
+
+// walkEnums recursively walks all enums declared in d.
+func walkEnums(d interface {
+	Enums() protoreflect.EnumDescriptors
+	Messages() protoreflect.MessageDescriptors
+}, f func(protoreflect.EnumDescriptor)) {
+	eds := d.Enums()
+	for i := eds.Len() - 1; i >= 0; i-- {
+		f(eds.Get(i))
+	}
+	mds := d.Messages()
+	for i := mds.Len() - 1; i >= 0; i-- {
+		walkEnums(mds.Get(i), f)
+	}
+}
+
+// messageName is the full name of protobuf message.
+type messageName = string
+
+var messageTypeCache sync.Map // map[messageName]reflect.Type
+
+// RegisterType is called from generated code to register the message Go type
+// for a message of the given name.
+//
+// Deprecated: Use protoregistry.GlobalTypes.RegisterMessage instead.
+func RegisterType(m Message, s messageName) {
+	mt := protoimpl.X.LegacyMessageTypeOf(m, protoreflect.FullName(s))
+	if err := protoregistry.GlobalTypes.RegisterMessage(mt); err != nil {
+		panic(err)
+	}
+	messageTypeCache.Store(s, reflect.TypeOf(m))
+}
+
+// RegisterMapType is called from generated code to register the Go map type
+// for a protobuf message representing a map entry.
+//
+// Deprecated: Do not use.
+func RegisterMapType(m interface{}, s messageName) {
+	t := reflect.TypeOf(m)
+	if t.Kind() != reflect.Map {
+		panic(fmt.Sprintf("invalid map kind: %v", t))
+	}
+	if _, ok := messageTypeCache.Load(s); ok {
+		panic(fmt.Errorf("proto: duplicate proto message registered: %s", s))
+	}
+	messageTypeCache.Store(s, t)
+}
+
+// MessageType returns the message type for a named message.
+// It returns nil if not found.
+//
+// Deprecated: Use protoregistry.GlobalTypes.FindMessageByName instead.
+func MessageType(s messageName) reflect.Type {
+	if v, ok := messageTypeCache.Load(s); ok {
+		return v.(reflect.Type)
+	}
+
+	// Derive the message type from the v2 registry.
+	var t reflect.Type
+	if mt, _ := protoregistry.GlobalTypes.FindMessageByName(protoreflect.FullName(s)); mt != nil {
+		t = messageGoType(mt)
+	}
+
+	// If we could not get a concrete type, it is possible that it is a
+	// pseudo-message for a map entry.
+	if t == nil {
+		d, _ := protoregistry.GlobalFiles.FindDescriptorByName(protoreflect.FullName(s))
+		if md, _ := d.(protoreflect.MessageDescriptor); md != nil && md.IsMapEntry() {
+			kt := goTypeForField(md.Fields().ByNumber(1))
+			vt := goTypeForField(md.Fields().ByNumber(2))
+			t = reflect.MapOf(kt, vt)
+		}
+	}
+
+	// Locally cache the message type for the given name.
+	if t != nil {
+		v, _ := messageTypeCache.LoadOrStore(s, t)
+		return v.(reflect.Type)
+	}
+	return nil
+}
+
+func goTypeForField(fd protoreflect.FieldDescriptor) reflect.Type {
+	switch k := fd.Kind(); k {
+	case protoreflect.EnumKind:
+		if et, _ := protoregistry.GlobalTypes.FindEnumByName(fd.Enum().FullName()); et != nil {
+			return enumGoType(et)
+		}
+		return reflect.TypeOf(protoreflect.EnumNumber(0))
+	case protoreflect.MessageKind, protoreflect.GroupKind:
+		if mt, _ := protoregistry.GlobalTypes.FindMessageByName(fd.Message().FullName()); mt != nil {
+			return messageGoType(mt)
+		}
+		return reflect.TypeOf((*protoreflect.Message)(nil)).Elem()
+	default:
+		return reflect.TypeOf(fd.Default().Interface())
+	}
+}
+
+func enumGoType(et protoreflect.EnumType) reflect.Type {
+	return reflect.TypeOf(et.New(0))
+}
+
+func messageGoType(mt protoreflect.MessageType) reflect.Type {
+	return reflect.TypeOf(MessageV1(mt.Zero().Interface()))
+}
+
+// MessageName returns the full protobuf name for the given message type.
+//
+// Deprecated: Use protoreflect.MessageDescriptor.FullName instead.
+func MessageName(m Message) messageName {
+	if m == nil {
+		return ""
+	}
+	if m, ok := m.(interface{ XXX_MessageName() messageName }); ok {
+		return m.XXX_MessageName()
+	}
+	return messageName(protoimpl.X.MessageDescriptorOf(m).FullName())
+}
+
+// RegisterExtension is called from the generated code to register
+// the extension descriptor.
+//
+// Deprecated: Use protoregistry.GlobalTypes.RegisterExtension instead.
+func RegisterExtension(d *ExtensionDesc) {
+	if err := protoregistry.GlobalTypes.RegisterExtension(d); err != nil {
+		panic(err)
+	}
+}
+
+type extensionsByNumber = map[int32]*ExtensionDesc
+
+var extensionCache sync.Map // map[messageName]extensionsByNumber
+
+// RegisteredExtensions returns a map of the registered extensions for the
+// provided protobuf message, indexed by the extension field number.
+//
+// Deprecated: Use protoregistry.GlobalTypes.RangeExtensionsByMessage instead.
+func RegisteredExtensions(m Message) extensionsByNumber {
+	// Check whether the cache is stale. If the number of extensions for
+	// the given message differs, then it means that some extensions were
+	// recently registered upstream that we do not know about.
+	s := MessageName(m)
+	v, _ := extensionCache.Load(s)
+	xs, _ := v.(extensionsByNumber)
+	if protoregistry.GlobalTypes.NumExtensionsByMessage(protoreflect.FullName(s)) == len(xs) {
+		return xs // cache is up-to-date
+	}
+
+	// Cache is stale, re-compute the extensions map.
+	xs = make(extensionsByNumber)
+	protoregistry.GlobalTypes.RangeExtensionsByMessage(protoreflect.FullName(s), func(xt protoreflect.ExtensionType) bool {
+		if xd, ok := xt.(*ExtensionDesc); ok {
+			xs[int32(xt.TypeDescriptor().Number())] = xd
+		} else {
+			// TODO: This implies that the protoreflect.ExtensionType is a
+			// custom type not generated by protoc-gen-go. We could try and
+			// convert the type to an ExtensionDesc.
+		}
+		return true
+	})
+	extensionCache.Store(s, xs)
+	return xs
+}

vendor/github.com/golang/protobuf/proto/text_decode.go

@@ -0,0 +1,801 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	"encoding"
+	"errors"
+	"fmt"
+	"reflect"
+	"strconv"
+	"strings"
+	"unicode/utf8"
+
+	"google.golang.org/protobuf/encoding/prototext"
+	protoV2 "google.golang.org/protobuf/proto"
+	"google.golang.org/protobuf/reflect/protoreflect"
+	"google.golang.org/protobuf/reflect/protoregistry"
+)
+
+const wrapTextUnmarshalV2 = false
+
+// ParseError is returned by UnmarshalText.
+type ParseError struct {
+	Message string
+
+	// Deprecated: Do not use.
+	Line, Offset int
+}
+
+func (e *ParseError) Error() string {
+	if wrapTextUnmarshalV2 {
+		return e.Message
+	}
+	if e.Line == 1 {
+		return fmt.Sprintf("line 1.%d: %v", e.Offset, e.Message)
+	}
+	return fmt.Sprintf("line %d: %v", e.Line, e.Message)
+}
+
+// UnmarshalText parses a proto text formatted string into m.
+func UnmarshalText(s string, m Message) error {
+	if u, ok := m.(encoding.TextUnmarshaler); ok {
+		return u.UnmarshalText([]byte(s))
+	}
+
+	m.Reset()
+	mi := MessageV2(m)
+
+	if wrapTextUnmarshalV2 {
+		err := prototext.UnmarshalOptions{
+			AllowPartial: true,
+		}.Unmarshal([]byte(s), mi)
+		if err != nil {
+			return &ParseError{Message: err.Error()}
+		}
+		return checkRequiredNotSet(mi)
+	} else {
+		if err := newTextParser(s).unmarshalMessage(mi.ProtoReflect(), ""); err != nil {
+			return err
+		}
+		return checkRequiredNotSet(mi)
+	}
+}
+
+type textParser struct {
+	s            string // remaining input
+	done         bool   // whether the parsing is finished (success or error)
+	backed       bool   // whether back() was called
+	offset, line int
+	cur          token
+}
+
+type token struct {
+	value    string
+	err      *ParseError
+	line     int    // line number
+	offset   int    // byte number from start of input, not start of line
+	unquoted string // the unquoted version of value, if it was a quoted string
+}
+
+func newTextParser(s string) *textParser {
+	p := new(textParser)
+	p.s = s
+	p.line = 1
+	p.cur.line = 1
+	return p
+}
+
+func (p *textParser) unmarshalMessage(m protoreflect.Message, terminator string) (err error) {
+	md := m.Descriptor()
+	fds := md.Fields()
+
+	// A struct is a sequence of "name: value", terminated by one of
+	// '>' or '}', or the end of the input.  A name may also be
+	// "[extension]" or "[type/url]".
+	//
+	// The whole struct can also be an expanded Any message, like:
+	// [type/url] < ... struct contents ... >
+	seen := make(map[protoreflect.FieldNumber]bool)
+	for {
+		tok := p.next()
+		if tok.err != nil {
+			return tok.err
+		}
+		if tok.value == terminator {
+			break
+		}
+		if tok.value == "[" {
+			if err := p.unmarshalExtensionOrAny(m, seen); err != nil {
+				return err
+			}
+			continue
+		}
+
+		// This is a normal, non-extension field.
+		name := protoreflect.Name(tok.value)
+		fd := fds.ByName(name)
+		switch {
+		case fd == nil:
+			gd := fds.ByName(protoreflect.Name(strings.ToLower(string(name))))
+			if gd != nil && gd.Kind() == protoreflect.GroupKind && gd.Message().Name() == name {
+				fd = gd
+			}
+		case fd.Kind() == protoreflect.GroupKind && fd.Message().Name() != name:
+			fd = nil
+		case fd.IsWeak() && fd.Message().IsPlaceholder():
+			fd = nil
+		}
+		if fd == nil {
+			typeName := string(md.FullName())
+			if m, ok := m.Interface().(Message); ok {
+				t := reflect.TypeOf(m)
+				if t.Kind() == reflect.Ptr {
+					typeName = t.Elem().String()
+				}
+			}
+			return p.errorf("unknown field name %q in %v", name, typeName)
+		}
+		if od := fd.ContainingOneof(); od != nil && m.WhichOneof(od) != nil {
+			return p.errorf("field '%s' would overwrite already parsed oneof '%s'", name, od.Name())
+		}
+		if fd.Cardinality() != protoreflect.Repeated && seen[fd.Number()] {
+			return p.errorf("non-repeated field %q was repeated", fd.Name())
+		}
+		seen[fd.Number()] = true
+
+		// Consume any colon.
+		if err := p.checkForColon(fd); err != nil {
+			return err
+		}
+
+		// Parse into the field.
+		v := m.Get(fd)
+		if !m.Has(fd) && (fd.IsList() || fd.IsMap() || fd.Message() != nil) {
+			v = m.Mutable(fd)
+		}
+		if v, err = p.unmarshalValue(v, fd); err != nil {
+			return err
+		}
+		m.Set(fd, v)
+
+		if err := p.consumeOptionalSeparator(); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+func (p *textParser) unmarshalExtensionOrAny(m protoreflect.Message, seen map[protoreflect.FieldNumber]bool) error {
+	name, err := p.consumeExtensionOrAnyName()
+	if err != nil {
+		return err
+	}
+
+	// If it contains a slash, it's an Any type URL.
+	if slashIdx := strings.LastIndex(name, "/"); slashIdx >= 0 {
+		tok := p.next()
+		if tok.err != nil {
+			return tok.err
+		}
+		// consume an optional colon
+		if tok.value == ":" {
+			tok = p.next()
+			if tok.err != nil {
+				return tok.err
+			}
+		}
+
+		var terminator string
+		switch tok.value {
+		case "<":
+			terminator = ">"
+		case "{":
+			terminator = "}"
+		default:
+			return p.errorf("expected '{' or '<', found %q", tok.value)
+		}
+
+		mt, err := protoregistry.GlobalTypes.FindMessageByURL(name)
+		if err != nil {
+			return p.errorf("unrecognized message %q in google.protobuf.Any", name[slashIdx+len("/"):])
+		}
+		m2 := mt.New()
+		if err := p.unmarshalMessage(m2, terminator); err != nil {
+			return err
+		}
+		b, err := protoV2.Marshal(m2.Interface())
+		if err != nil {
+			return p.errorf("failed to marshal message of type %q: %v", name[slashIdx+len("/"):], err)
+		}
+
+		urlFD := m.Descriptor().Fields().ByName("type_url")
+		valFD := m.Descriptor().Fields().ByName("value")
+		if seen[urlFD.Number()] {
+			return p.errorf("Any message unpacked multiple times, or %q already set", urlFD.Name())
+		}
+		if seen[valFD.Number()] {
+			return p.errorf("Any message unpacked multiple times, or %q already set", valFD.Name())
+		}
+		m.Set(urlFD, protoreflect.ValueOfString(name))
+		m.Set(valFD, protoreflect.ValueOfBytes(b))
+		seen[urlFD.Number()] = true
+		seen[valFD.Number()] = true
+		return nil
+	}
+
+	xname := protoreflect.FullName(name)
+	xt, _ := protoregistry.GlobalTypes.FindExtensionByName(xname)
+	if xt == nil && isMessageSet(m.Descriptor()) {
+		xt, _ = protoregistry.GlobalTypes.FindExtensionByName(xname.Append("message_set_extension"))
+	}
+	if xt == nil {
+		return p.errorf("unrecognized extension %q", name)
+	}
+	fd := xt.TypeDescriptor()
+	if fd.ContainingMessage().FullName() != m.Descriptor().FullName() {
+		return p.errorf("extension field %q does not extend message %q", name, m.Descriptor().FullName())
+	}
+
+	if err := p.checkForColon(fd); err != nil {
+		return err
+	}
+
+	v := m.Get(fd)
+	if !m.Has(fd) && (fd.IsList() || fd.IsMap() || fd.Message() != nil) {
+		v = m.Mutable(fd)
+	}
+	v, err = p.unmarshalValue(v, fd)
+	if err != nil {
+		return err
+	}
+	m.Set(fd, v)
+	return p.consumeOptionalSeparator()
+}
+
+func (p *textParser) unmarshalValue(v protoreflect.Value, fd protoreflect.FieldDescriptor) (protoreflect.Value, error) {
+	tok := p.next()
+	if tok.err != nil {
+		return v, tok.err
+	}
+	if tok.value == "" {
+		return v, p.errorf("unexpected EOF")
+	}
+
+	switch {
+	case fd.IsList():
+		lv := v.List()
+		var err error
+		if tok.value == "[" {
+			// Repeated field with list notation, like [1,2,3].
+			for {
+				vv := lv.NewElement()
+				vv, err = p.unmarshalSingularValue(vv, fd)
+				if err != nil {
+					return v, err
+				}
+				lv.Append(vv)
+
+				tok := p.next()
+				if tok.err != nil {
+					return v, tok.err
+				}
+				if tok.value == "]" {
+					break
+				}
+				if tok.value != "," {
+					return v, p.errorf("Expected ']' or ',' found %q", tok.value)
+				}
+			}
+			return v, nil
+		}
+
+		// One value of the repeated field.
+		p.back()
+		vv := lv.NewElement()
+		vv, err = p.unmarshalSingularValue(vv, fd)
+		if err != nil {
+			return v, err
+		}
+		lv.Append(vv)
+		return v, nil
+	case fd.IsMap():
+		// The map entry should be this sequence of tokens:
+		//	< key : KEY value : VALUE >
+		// However, implementations may omit key or value, and technically
+		// we should support them in any order.
+		var terminator string
+		switch tok.value {
+		case "<":
+			terminator = ">"
+		case "{":
+			terminator = "}"
+		default:
+			return v, p.errorf("expected '{' or '<', found %q", tok.value)
+		}
+
+		keyFD := fd.MapKey()
+		valFD := fd.MapValue()
+
+		mv := v.Map()
+		kv := keyFD.Default()
+		vv := mv.NewValue()
+		for {
+			tok := p.next()
+			if tok.err != nil {
+				return v, tok.err
+			}
+			if tok.value == terminator {
+				break
+			}
+			var err error
+			switch tok.value {
+			case "key":
+				if err := p.consumeToken(":"); err != nil {
+					return v, err
+				}
+				if kv, err = p.unmarshalSingularValue(kv, keyFD); err != nil {
+					return v, err
+				}
+				if err := p.consumeOptionalSeparator(); err != nil {
+					return v, err
+				}
+			case "value":
+				if err := p.checkForColon(valFD); err != nil {
+					return v, err
+				}
+				if vv, err = p.unmarshalSingularValue(vv, valFD); err != nil {
+					return v, err
+				}
+				if err := p.consumeOptionalSeparator(); err != nil {
+					return v, err
+				}
+			default:
+				p.back()
+				return v, p.errorf(`expected "key", "value", or %q, found %q`, terminator, tok.value)
+			}
+		}
+		mv.Set(kv.MapKey(), vv)
+		return v, nil
+	default:
+		p.back()
+		return p.unmarshalSingularValue(v, fd)
+	}
+}
+
+func (p *textParser) unmarshalSingularValue(v protoreflect.Value, fd protoreflect.FieldDescriptor) (protoreflect.Value, error) {
+	tok := p.next()
+	if tok.err != nil {
+		return v, tok.err
+	}
+	if tok.value == "" {
+		return v, p.errorf("unexpected EOF")
+	}
+
+	switch fd.Kind() {
+	case protoreflect.BoolKind:
+		switch tok.value {
+		case "true", "1", "t", "True":
+			return protoreflect.ValueOfBool(true), nil
+		case "false", "0", "f", "False":
+			return protoreflect.ValueOfBool(false), nil
+		}
+	case protoreflect.Int32Kind, protoreflect.Sint32Kind, protoreflect.Sfixed32Kind:
+		if x, err := strconv.ParseInt(tok.value, 0, 32); err == nil {
+			return protoreflect.ValueOfInt32(int32(x)), nil
+		}
+
+		// The C++ parser accepts large positive hex numbers that uses
+		// two's complement arithmetic to represent negative numbers.
+		// This feature is here for backwards compatibility with C++.
+		if strings.HasPrefix(tok.value, "0x") {
+			if x, err := strconv.ParseUint(tok.value, 0, 32); err == nil {
+				return protoreflect.ValueOfInt32(int32(-(int64(^x) + 1))), nil
+			}
+		}
+	case protoreflect.Int64Kind, protoreflect.Sint64Kind, protoreflect.Sfixed64Kind:
+		if x, err := strconv.ParseInt(tok.value, 0, 64); err == nil {
+			return protoreflect.ValueOfInt64(int64(x)), nil
+		}
+
+		// The C++ parser accepts large positive hex numbers that uses
+		// two's complement arithmetic to represent negative numbers.
+		// This feature is here for backwards compatibility with C++.
+		if strings.HasPrefix(tok.value, "0x") {
+			if x, err := strconv.ParseUint(tok.value, 0, 64); err == nil {
+				return protoreflect.ValueOfInt64(int64(-(int64(^x) + 1))), nil
+			}
+		}
+	case protoreflect.Uint32Kind, protoreflect.Fixed32Kind:
+		if x, err := strconv.ParseUint(tok.value, 0, 32); err == nil {
+			return protoreflect.ValueOfUint32(uint32(x)), nil
+		}
+	case protoreflect.Uint64Kind, protoreflect.Fixed64Kind:
+		if x, err := strconv.ParseUint(tok.value, 0, 64); err == nil {
+			return protoreflect.ValueOfUint64(uint64(x)), nil
+		}
+	case protoreflect.FloatKind:
+		// Ignore 'f' for compatibility with output generated by C++,
+		// but don't remove 'f' when the value is "-inf" or "inf".
+		v := tok.value
+		if strings.HasSuffix(v, "f") && v != "-inf" && v != "inf" {
+			v = v[:len(v)-len("f")]
+		}
+		if x, err := strconv.ParseFloat(v, 32); err == nil {
+			return protoreflect.ValueOfFloat32(float32(x)), nil
+		}
+	case protoreflect.DoubleKind:
+		// Ignore 'f' for compatibility with output generated by C++,
+		// but don't remove 'f' when the value is "-inf" or "inf".
+		v := tok.value
+		if strings.HasSuffix(v, "f") && v != "-inf" && v != "inf" {
+			v = v[:len(v)-len("f")]
+		}
+		if x, err := strconv.ParseFloat(v, 64); err == nil {
+			return protoreflect.ValueOfFloat64(float64(x)), nil
+		}
+	case protoreflect.StringKind:
+		if isQuote(tok.value[0]) {
+			return protoreflect.ValueOfString(tok.unquoted), nil
+		}
+	case protoreflect.BytesKind:
+		if isQuote(tok.value[0]) {
+			return protoreflect.ValueOfBytes([]byte(tok.unquoted)), nil
+		}
+	case protoreflect.EnumKind:
+		if x, err := strconv.ParseInt(tok.value, 0, 32); err == nil {
+			return protoreflect.ValueOfEnum(protoreflect.EnumNumber(x)), nil
+		}
+		vd := fd.Enum().Values().ByName(protoreflect.Name(tok.value))
+		if vd != nil {
+			return protoreflect.ValueOfEnum(vd.Number()), nil
+		}
+	case protoreflect.MessageKind, protoreflect.GroupKind:
+		var terminator string
+		switch tok.value {
+		case "{":
+			terminator = "}"
+		case "<":
+			terminator = ">"
+		default:
+			return v, p.errorf("expected '{' or '<', found %q", tok.value)
+		}
+		err := p.unmarshalMessage(v.Message(), terminator)
+		return v, err
+	default:
+		panic(fmt.Sprintf("invalid kind %v", fd.Kind()))
+	}
+	return v, p.errorf("invalid %v: %v", fd.Kind(), tok.value)
+}
+
+// Consume a ':' from the input stream (if the next token is a colon),
+// returning an error if a colon is needed but not present.
+func (p *textParser) checkForColon(fd protoreflect.FieldDescriptor) *ParseError {
+	tok := p.next()
+	if tok.err != nil {
+		return tok.err
+	}
+	if tok.value != ":" {
+		if fd.Message() == nil {
+			return p.errorf("expected ':', found %q", tok.value)
+		}
+		p.back()
+	}
+	return nil
+}
+
+// consumeExtensionOrAnyName consumes an extension name or an Any type URL and
+// the following ']'. It returns the name or URL consumed.
+func (p *textParser) consumeExtensionOrAnyName() (string, error) {
+	tok := p.next()
+	if tok.err != nil {
+		return "", tok.err
+	}
+
+	// If extension name or type url is quoted, it's a single token.
+	if len(tok.value) > 2 && isQuote(tok.value[0]) && tok.value[len(tok.value)-1] == tok.value[0] {
+		name, err := unquoteC(tok.value[1:len(tok.value)-1], rune(tok.value[0]))
+		if err != nil {
+			return "", err
+		}
+		return name, p.consumeToken("]")
+	}
+
+	// Consume everything up to "]"
+	var parts []string
+	for tok.value != "]" {
+		parts = append(parts, tok.value)
+		tok = p.next()
+		if tok.err != nil {
+			return "", p.errorf("unrecognized type_url or extension name: %s", tok.err)
+		}
+		if p.done && tok.value != "]" {
+			return "", p.errorf("unclosed type_url or extension name")
+		}
+	}
+	return strings.Join(parts, ""), nil
+}
+
+// consumeOptionalSeparator consumes an optional semicolon or comma.
+// It is used in unmarshalMessage to provide backward compatibility.
+func (p *textParser) consumeOptionalSeparator() error {
+	tok := p.next()
+	if tok.err != nil {
+		return tok.err
+	}
+	if tok.value != ";" && tok.value != "," {
+		p.back()
+	}
+	return nil
+}
+
+func (p *textParser) errorf(format string, a ...interface{}) *ParseError {
+	pe := &ParseError{fmt.Sprintf(format, a...), p.cur.line, p.cur.offset}
+	p.cur.err = pe
+	p.done = true
+	return pe
+}
+
+func (p *textParser) skipWhitespace() {
+	i := 0
+	for i < len(p.s) && (isWhitespace(p.s[i]) || p.s[i] == '#') {
+		if p.s[i] == '#' {
+			// comment; skip to end of line or input
+			for i < len(p.s) && p.s[i] != '\n' {
+				i++
+			}
+			if i == len(p.s) {
+				break
+			}
+		}
+		if p.s[i] == '\n' {
+			p.line++
+		}
+		i++
+	}
+	p.offset += i
+	p.s = p.s[i:len(p.s)]
+	if len(p.s) == 0 {
+		p.done = true
+	}
+}
+
+func (p *textParser) advance() {
+	// Skip whitespace
+	p.skipWhitespace()
+	if p.done {
+		return
+	}
+
+	// Start of non-whitespace
+	p.cur.err = nil
+	p.cur.offset, p.cur.line = p.offset, p.line
+	p.cur.unquoted = ""
+	switch p.s[0] {
+	case '<', '>', '{', '}', ':', '[', ']', ';', ',', '/':
+		// Single symbol
+		p.cur.value, p.s = p.s[0:1], p.s[1:len(p.s)]
+	case '"', '\'':
+		// Quoted string
+		i := 1
+		for i < len(p.s) && p.s[i] != p.s[0] && p.s[i] != '\n' {
+			if p.s[i] == '\\' && i+1 < len(p.s) {
+				// skip escaped char
+				i++
+			}
+			i++
+		}
+		if i >= len(p.s) || p.s[i] != p.s[0] {
+			p.errorf("unmatched quote")
+			return
+		}
+		unq, err := unquoteC(p.s[1:i], rune(p.s[0]))
+		if err != nil {
+			p.errorf("invalid quoted string %s: %v", p.s[0:i+1], err)
+			return
+		}
+		p.cur.value, p.s = p.s[0:i+1], p.s[i+1:len(p.s)]
+		p.cur.unquoted = unq
+	default:
+		i := 0
+		for i < len(p.s) && isIdentOrNumberChar(p.s[i]) {
+			i++
+		}
+		if i == 0 {
+			p.errorf("unexpected byte %#x", p.s[0])
+			return
+		}
+		p.cur.value, p.s = p.s[0:i], p.s[i:len(p.s)]
+	}
+	p.offset += len(p.cur.value)
+}
+
+// Back off the parser by one token. Can only be done between calls to next().
+// It makes the next advance() a no-op.
+func (p *textParser) back() { p.backed = true }
+
+// Advances the parser and returns the new current token.
+func (p *textParser) next() *token {
+	if p.backed || p.done {
+		p.backed = false
+		return &p.cur
+	}
+	p.advance()
+	if p.done {
+		p.cur.value = ""
+	} else if len(p.cur.value) > 0 && isQuote(p.cur.value[0]) {
+		// Look for multiple quoted strings separated by whitespace,
+		// and concatenate them.
+		cat := p.cur
+		for {
+			p.skipWhitespace()
+			if p.done || !isQuote(p.s[0]) {
+				break
+			}
+			p.advance()
+			if p.cur.err != nil {
+				return &p.cur
+			}
+			cat.value += " " + p.cur.value
+			cat.unquoted += p.cur.unquoted
+		}
+		p.done = false // parser may have seen EOF, but we want to return cat
+		p.cur = cat
+	}
+	return &p.cur
+}
+
+func (p *textParser) consumeToken(s string) error {
+	tok := p.next()
+	if tok.err != nil {
+		return tok.err
+	}
+	if tok.value != s {
+		p.back()
+		return p.errorf("expected %q, found %q", s, tok.value)
+	}
+	return nil
+}
+
+var errBadUTF8 = errors.New("proto: bad UTF-8")
+
+func unquoteC(s string, quote rune) (string, error) {
+	// This is based on C++'s tokenizer.cc.
+	// Despite its name, this is *not* parsing C syntax.
+	// For instance, "\0" is an invalid quoted string.
+
+	// Avoid allocation in trivial cases.
+	simple := true
+	for _, r := range s {
+		if r == '\\' || r == quote {
+			simple = false
+			break
+		}
+	}
+	if simple {
+		return s, nil
+	}
+
+	buf := make([]byte, 0, 3*len(s)/2)
+	for len(s) > 0 {
+		r, n := utf8.DecodeRuneInString(s)
+		if r == utf8.RuneError && n == 1 {
+			return "", errBadUTF8
+		}
+		s = s[n:]
+		if r != '\\' {
+			if r < utf8.RuneSelf {
+				buf = append(buf, byte(r))
+			} else {
+				buf = append(buf, string(r)...)
+			}
+			continue
+		}
+
+		ch, tail, err := unescape(s)
+		if err != nil {
+			return "", err
+		}
+		buf = append(buf, ch...)
+		s = tail
+	}
+	return string(buf), nil
+}
+
+func unescape(s string) (ch string, tail string, err error) {
+	r, n := utf8.DecodeRuneInString(s)
+	if r == utf8.RuneError && n == 1 {
+		return "", "", errBadUTF8
+	}
+	s = s[n:]
+	switch r {
+	case 'a':
+		return "\a", s, nil
+	case 'b':
+		return "\b", s, nil
+	case 'f':
+		return "\f", s, nil
+	case 'n':
+		return "\n", s, nil
+	case 'r':
+		return "\r", s, nil
+	case 't':
+		return "\t", s, nil
+	case 'v':
+		return "\v", s, nil
+	case '?':
+		return "?", s, nil // trigraph workaround
+	case '\'', '"', '\\':
+		return string(r), s, nil
+	case '0', '1', '2', '3', '4', '5', '6', '7':
+		if len(s) < 2 {
+			return "", "", fmt.Errorf(`\%c requires 2 following digits`, r)
+		}
+		ss := string(r) + s[:2]
+		s = s[2:]
+		i, err := strconv.ParseUint(ss, 8, 8)
+		if err != nil {
+			return "", "", fmt.Errorf(`\%s contains non-octal digits`, ss)
+		}
+		return string([]byte{byte(i)}), s, nil
+	case 'x', 'X', 'u', 'U':
+		var n int
+		switch r {
+		case 'x', 'X':
+			n = 2
+		case 'u':
+			n = 4
+		case 'U':
+			n = 8
+		}
+		if len(s) < n {
+			return "", "", fmt.Errorf(`\%c requires %d following digits`, r, n)
+		}
+		ss := s[:n]
+		s = s[n:]
+		i, err := strconv.ParseUint(ss, 16, 64)
+		if err != nil {
+			return "", "", fmt.Errorf(`\%c%s contains non-hexadecimal digits`, r, ss)
+		}
+		if r == 'x' || r == 'X' {
+			return string([]byte{byte(i)}), s, nil
+		}
+		if i > utf8.MaxRune {
+			return "", "", fmt.Errorf(`\%c%s is not a valid Unicode code point`, r, ss)
+		}
+		return string(rune(i)), s, nil
+	}
+	return "", "", fmt.Errorf(`unknown escape \%c`, r)
+}
+
+func isIdentOrNumberChar(c byte) bool {
+	switch {
+	case 'A' <= c && c <= 'Z', 'a' <= c && c <= 'z':
+		return true
+	case '0' <= c && c <= '9':
+		return true
+	}
+	switch c {
+	case '-', '+', '.', '_':
+		return true
+	}
+	return false
+}
+
+func isWhitespace(c byte) bool {
+	switch c {
+	case ' ', '\t', '\n', '\r':
+		return true
+	}
+	return false
+}
+
+func isQuote(c byte) bool {
+	switch c {
+	case '"', '\'':
+		return true
+	}
+	return false
+}

vendor/github.com/golang/protobuf/proto/text_encode.go

@@ -0,0 +1,560 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	"bytes"
+	"encoding"
+	"fmt"
+	"io"
+	"math"
+	"sort"
+	"strings"
+
+	"google.golang.org/protobuf/encoding/prototext"
+	"google.golang.org/protobuf/encoding/protowire"
+	"google.golang.org/protobuf/proto"
+	"google.golang.org/protobuf/reflect/protoreflect"
+	"google.golang.org/protobuf/reflect/protoregistry"
+)
+
+const wrapTextMarshalV2 = false
+
+// TextMarshaler is a configurable text format marshaler.
+type TextMarshaler struct {
+	Compact   bool // use compact text format (one line)
+	ExpandAny bool // expand google.protobuf.Any messages of known types
+}
+
+// Marshal writes the proto text format of m to w.
+func (tm *TextMarshaler) Marshal(w io.Writer, m Message) error {
+	b, err := tm.marshal(m)
+	if len(b) > 0 {
+		if _, err := w.Write(b); err != nil {
+			return err
+		}
+	}
+	return err
+}
+
+// Text returns a proto text formatted string of m.
+func (tm *TextMarshaler) Text(m Message) string {
+	b, _ := tm.marshal(m)
+	return string(b)
+}
+
+func (tm *TextMarshaler) marshal(m Message) ([]byte, error) {
+	mr := MessageReflect(m)
+	if mr == nil || !mr.IsValid() {
+		return []byte("<nil>"), nil
+	}
+
+	if wrapTextMarshalV2 {
+		if m, ok := m.(encoding.TextMarshaler); ok {
+			return m.MarshalText()
+		}
+
+		opts := prototext.MarshalOptions{
+			AllowPartial: true,
+			EmitUnknown:  true,
+		}
+		if !tm.Compact {
+			opts.Indent = "  "
+		}
+		if !tm.ExpandAny {
+			opts.Resolver = (*protoregistry.Types)(nil)
+		}
+		return opts.Marshal(mr.Interface())
+	} else {
+		w := &textWriter{
+			compact:   tm.Compact,
+			expandAny: tm.ExpandAny,
+			complete:  true,
+		}
+
+		if m, ok := m.(encoding.TextMarshaler); ok {
+			b, err := m.MarshalText()
+			if err != nil {
+				return nil, err
+			}
+			w.Write(b)
+			return w.buf, nil
+		}
+
+		err := w.writeMessage(mr)
+		return w.buf, err
+	}
+}
+
+var (
+	defaultTextMarshaler = TextMarshaler{}
+	compactTextMarshaler = TextMarshaler{Compact: true}
+)
+
+// MarshalText writes the proto text format of m to w.
+func MarshalText(w io.Writer, m Message) error { return defaultTextMarshaler.Marshal(w, m) }
+
+// MarshalTextString returns a proto text formatted string of m.
+func MarshalTextString(m Message) string { return defaultTextMarshaler.Text(m) }
+
+// CompactText writes the compact proto text format of m to w.
+func CompactText(w io.Writer, m Message) error { return compactTextMarshaler.Marshal(w, m) }
+
+// CompactTextString returns a compact proto text formatted string of m.
+func CompactTextString(m Message) string { return compactTextMarshaler.Text(m) }
+
+var (
+	newline         = []byte("\n")
+	endBraceNewline = []byte("}\n")
+	posInf          = []byte("inf")
+	negInf          = []byte("-inf")
+	nan             = []byte("nan")
+)
+
+// textWriter is an io.Writer that tracks its indentation level.
+type textWriter struct {
+	compact   bool // same as TextMarshaler.Compact
+	expandAny bool // same as TextMarshaler.ExpandAny
+	complete  bool // whether the current position is a complete line
+	indent    int  // indentation level; never negative
+	buf       []byte
+}
+
+func (w *textWriter) Write(p []byte) (n int, _ error) {
+	newlines := bytes.Count(p, newline)
+	if newlines == 0 {
+		if !w.compact && w.complete {
+			w.writeIndent()
+		}
+		w.buf = append(w.buf, p...)
+		w.complete = false
+		return len(p), nil
+	}
+
+	frags := bytes.SplitN(p, newline, newlines+1)
+	if w.compact {
+		for i, frag := range frags {
+			if i > 0 {
+				w.buf = append(w.buf, ' ')
+				n++
+			}
+			w.buf = append(w.buf, frag...)
+			n += len(frag)
+		}
+		return n, nil
+	}
+
+	for i, frag := range frags {
+		if w.complete {
+			w.writeIndent()
+		}
+		w.buf = append(w.buf, frag...)
+		n += len(frag)
+		if i+1 < len(frags) {
+			w.buf = append(w.buf, '\n')
+			n++
+		}
+	}
+	w.complete = len(frags[len(frags)-1]) == 0
+	return n, nil
+}
+
+func (w *textWriter) WriteByte(c byte) error {
+	if w.compact && c == '\n' {
+		c = ' '
+	}
+	if !w.compact && w.complete {
+		w.writeIndent()
+	}
+	w.buf = append(w.buf, c)
+	w.complete = c == '\n'
+	return nil
+}
+
+func (w *textWriter) writeName(fd protoreflect.FieldDescriptor) {
+	if !w.compact && w.complete {
+		w.writeIndent()
+	}
+	w.complete = false
+
+	if fd.Kind() != protoreflect.GroupKind {
+		w.buf = append(w.buf, fd.Name()...)
+		w.WriteByte(':')
+	} else {
+		// Use message type name for group field name.
+		w.buf = append(w.buf, fd.Message().Name()...)
+	}
+
+	if !w.compact {
+		w.WriteByte(' ')
+	}
+}
+
+func requiresQuotes(u string) bool {
+	// When type URL contains any characters except [0-9A-Za-z./\-]*, it must be quoted.
+	for _, ch := range u {
+		switch {
+		case ch == '.' || ch == '/' || ch == '_':
+			continue
+		case '0' <= ch && ch <= '9':
+			continue
+		case 'A' <= ch && ch <= 'Z':
+			continue
+		case 'a' <= ch && ch <= 'z':
+			continue
+		default:
+			return true
+		}
+	}
+	return false
+}
+
+// writeProto3Any writes an expanded google.protobuf.Any message.
+//
+// It returns (false, nil) if sv value can't be unmarshaled (e.g. because
+// required messages are not linked in).
+//
+// It returns (true, error) when sv was written in expanded format or an error
+// was encountered.
+func (w *textWriter) writeProto3Any(m protoreflect.Message) (bool, error) {
+	md := m.Descriptor()
+	fdURL := md.Fields().ByName("type_url")
+	fdVal := md.Fields().ByName("value")
+
+	url := m.Get(fdURL).String()
+	mt, err := protoregistry.GlobalTypes.FindMessageByURL(url)
+	if err != nil {
+		return false, nil
+	}
+
+	b := m.Get(fdVal).Bytes()
+	m2 := mt.New()
+	if err := proto.Unmarshal(b, m2.Interface()); err != nil {
+		return false, nil
+	}
+	w.Write([]byte("["))
+	if requiresQuotes(url) {
+		w.writeQuotedString(url)
+	} else {
+		w.Write([]byte(url))
+	}
+	if w.compact {
+		w.Write([]byte("]:<"))
+	} else {
+		w.Write([]byte("]: <\n"))
+		w.indent++
+	}
+	if err := w.writeMessage(m2); err != nil {
+		return true, err
+	}
+	if w.compact {
+		w.Write([]byte("> "))
+	} else {
+		w.indent--
+		w.Write([]byte(">\n"))
+	}
+	return true, nil
+}
+
+func (w *textWriter) writeMessage(m protoreflect.Message) error {
+	md := m.Descriptor()
+	if w.expandAny && md.FullName() == "google.protobuf.Any" {
+		if canExpand, err := w.writeProto3Any(m); canExpand {
+			return err
+		}
+	}
+
+	fds := md.Fields()
+	for i := 0; i < fds.Len(); {
+		fd := fds.Get(i)
+		if od := fd.ContainingOneof(); od != nil {
+			fd = m.WhichOneof(od)
+			i += od.Fields().Len()
+		} else {
+			i++
+		}
+		if fd == nil || !m.Has(fd) {
+			continue
+		}
+
+		switch {
+		case fd.IsList():
+			lv := m.Get(fd).List()
+			for j := 0; j < lv.Len(); j++ {
+				w.writeName(fd)
+				v := lv.Get(j)
+				if err := w.writeSingularValue(v, fd); err != nil {
+					return err
+				}
+				w.WriteByte('\n')
+			}
+		case fd.IsMap():
+			kfd := fd.MapKey()
+			vfd := fd.MapValue()
+			mv := m.Get(fd).Map()
+
+			type entry struct{ key, val protoreflect.Value }
+			var entries []entry
+			mv.Range(func(k protoreflect.MapKey, v protoreflect.Value) bool {
+				entries = append(entries, entry{k.Value(), v})
+				return true
+			})
+			sort.Slice(entries, func(i, j int) bool {
+				switch kfd.Kind() {
+				case protoreflect.BoolKind:
+					return !entries[i].key.Bool() && entries[j].key.Bool()
+				case protoreflect.Int32Kind, protoreflect.Sint32Kind, protoreflect.Sfixed32Kind, protoreflect.Int64Kind, protoreflect.Sint64Kind, protoreflect.Sfixed64Kind:
+					return entries[i].key.Int() < entries[j].key.Int()
+				case protoreflect.Uint32Kind, protoreflect.Fixed32Kind, protoreflect.Uint64Kind, protoreflect.Fixed64Kind:
+					return entries[i].key.Uint() < entries[j].key.Uint()
+				case protoreflect.StringKind:
+					return entries[i].key.String() < entries[j].key.String()
+				default:
+					panic("invalid kind")
+				}
+			})
+			for _, entry := range entries {
+				w.writeName(fd)
+				w.WriteByte('<')
+				if !w.compact {
+					w.WriteByte('\n')
+				}
+				w.indent++
+				w.writeName(kfd)
+				if err := w.writeSingularValue(entry.key, kfd); err != nil {
+					return err
+				}
+				w.WriteByte('\n')
+				w.writeName(vfd)
+				if err := w.writeSingularValue(entry.val, vfd); err != nil {
+					return err
+				}
+				w.WriteByte('\n')
+				w.indent--
+				w.WriteByte('>')
+				w.WriteByte('\n')
+			}
+		default:
+			w.writeName(fd)
+			if err := w.writeSingularValue(m.Get(fd), fd); err != nil {
+				return err
+			}
+			w.WriteByte('\n')
+		}
+	}
+
+	if b := m.GetUnknown(); len(b) > 0 {
+		w.writeUnknownFields(b)
+	}
+	return w.writeExtensions(m)
+}
+
+func (w *textWriter) writeSingularValue(v protoreflect.Value, fd protoreflect.FieldDescriptor) error {
+	switch fd.Kind() {
+	case protoreflect.FloatKind, protoreflect.DoubleKind:
+		switch vf := v.Float(); {
+		case math.IsInf(vf, +1):
+			w.Write(posInf)
+		case math.IsInf(vf, -1):
+			w.Write(negInf)
+		case math.IsNaN(vf):
+			w.Write(nan)
+		default:
+			fmt.Fprint(w, v.Interface())
+		}
+	case protoreflect.StringKind:
+		// NOTE: This does not validate UTF-8 for historical reasons.
+		w.writeQuotedString(string(v.String()))
+	case protoreflect.BytesKind:
+		w.writeQuotedString(string(v.Bytes()))
+	case protoreflect.MessageKind, protoreflect.GroupKind:
+		var bra, ket byte = '<', '>'
+		if fd.Kind() == protoreflect.GroupKind {
+			bra, ket = '{', '}'
+		}
+		w.WriteByte(bra)
+		if !w.compact {
+			w.WriteByte('\n')
+		}
+		w.indent++
+		m := v.Message()
+		if m2, ok := m.Interface().(encoding.TextMarshaler); ok {
+			b, err := m2.MarshalText()
+			if err != nil {
+				return err
+			}
+			w.Write(b)
+		} else {
+			w.writeMessage(m)
+		}
+		w.indent--
+		w.WriteByte(ket)
+	case protoreflect.EnumKind:
+		if ev := fd.Enum().Values().ByNumber(v.Enum()); ev != nil {
+			fmt.Fprint(w, ev.Name())
+		} else {
+			fmt.Fprint(w, v.Enum())
+		}
+	default:
+		fmt.Fprint(w, v.Interface())
+	}
+	return nil
+}
+
+// writeQuotedString writes a quoted string in the protocol buffer text format.
+func (w *textWriter) writeQuotedString(s string) {
+	w.WriteByte('"')
+	for i := 0; i < len(s); i++ {
+		switch c := s[i]; c {
+		case '\n':
+			w.buf = append(w.buf, `\n`...)
+		case '\r':
+			w.buf = append(w.buf, `\r`...)
+		case '\t':
+			w.buf = append(w.buf, `\t`...)
+		case '"':
+			w.buf = append(w.buf, `\"`...)
+		case '\\':
+			w.buf = append(w.buf, `\\`...)
+		default:
+			if isPrint := c >= 0x20 && c < 0x7f; isPrint {
+				w.buf = append(w.buf, c)
+			} else {
+				w.buf = append(w.buf, fmt.Sprintf(`\%03o`, c)...)
+			}
+		}
+	}
+	w.WriteByte('"')
+}
+
+func (w *textWriter) writeUnknownFields(b []byte) {
+	if !w.compact {
+		fmt.Fprintf(w, "/* %d unknown bytes */\n", len(b))
+	}
+
+	for len(b) > 0 {
+		num, wtyp, n := protowire.ConsumeTag(b)
+		if n < 0 {
+			return
+		}
+		b = b[n:]
+
+		if wtyp == protowire.EndGroupType {
+			w.indent--
+			w.Write(endBraceNewline)
+			continue
+		}
+		fmt.Fprint(w, num)
+		if wtyp != protowire.StartGroupType {
+			w.WriteByte(':')
+		}
+		if !w.compact || wtyp == protowire.StartGroupType {
+			w.WriteByte(' ')
+		}
+		switch wtyp {
+		case protowire.VarintType:
+			v, n := protowire.ConsumeVarint(b)
+			if n < 0 {
+				return
+			}
+			b = b[n:]
+			fmt.Fprint(w, v)
+		case protowire.Fixed32Type:
+			v, n := protowire.ConsumeFixed32(b)
+			if n < 0 {
+				return
+			}
+			b = b[n:]
+			fmt.Fprint(w, v)
+		case protowire.Fixed64Type:
+			v, n := protowire.ConsumeFixed64(b)
+			if n < 0 {
+				return
+			}
+			b = b[n:]
+			fmt.Fprint(w, v)
+		case protowire.BytesType:
+			v, n := protowire.ConsumeBytes(b)
+			if n < 0 {
+				return
+			}
+			b = b[n:]
+			fmt.Fprintf(w, "%q", v)
+		case protowire.StartGroupType:
+			w.WriteByte('{')
+			w.indent++
+		default:
+			fmt.Fprintf(w, "/* unknown wire type %d */", wtyp)
+		}
+		w.WriteByte('\n')
+	}
+}
+
+// writeExtensions writes all the extensions in m.
+func (w *textWriter) writeExtensions(m protoreflect.Message) error {
+	md := m.Descriptor()
+	if md.ExtensionRanges().Len() == 0 {
+		return nil
+	}
+
+	type ext struct {
+		desc protoreflect.FieldDescriptor
+		val  protoreflect.Value
+	}
+	var exts []ext
+	m.Range(func(fd protoreflect.FieldDescriptor, v protoreflect.Value) bool {
+		if fd.IsExtension() {
+			exts = append(exts, ext{fd, v})
+		}
+		return true
+	})
+	sort.Slice(exts, func(i, j int) bool {
+		return exts[i].desc.Number() < exts[j].desc.Number()
+	})
+
+	for _, ext := range exts {
+		// For message set, use the name of the message as the extension name.
+		name := string(ext.desc.FullName())
+		if isMessageSet(ext.desc.ContainingMessage()) {
+			name = strings.TrimSuffix(name, ".message_set_extension")
+		}
+
+		if !ext.desc.IsList() {
+			if err := w.writeSingularExtension(name, ext.val, ext.desc); err != nil {
+				return err
+			}
+		} else {
+			lv := ext.val.List()
+			for i := 0; i < lv.Len(); i++ {
+				if err := w.writeSingularExtension(name, lv.Get(i), ext.desc); err != nil {
+					return err
+				}
+			}
+		}
+	}
+	return nil
+}
+
+func (w *textWriter) writeSingularExtension(name string, v protoreflect.Value, fd protoreflect.FieldDescriptor) error {
+	fmt.Fprintf(w, "[%s]:", name)
+	if !w.compact {
+		w.WriteByte(' ')
+	}
+	if err := w.writeSingularValue(v, fd); err != nil {
+		return err
+	}
+	w.WriteByte('\n')
+	return nil
+}
+
+func (w *textWriter) writeIndent() {
+	if !w.complete {
+		return
+	}
+	for i := 0; i < w.indent*2; i++ {
+		w.buf = append(w.buf, ' ')
+	}
+	w.complete = false
+}

vendor/github.com/golang/protobuf/proto/wire.go

@@ -0,0 +1,78 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+import (
+	protoV2 "google.golang.org/protobuf/proto"
+	"google.golang.org/protobuf/runtime/protoiface"
+)
+
+// Size returns the size in bytes of the wire-format encoding of m.
+func Size(m Message) int {
+	if m == nil {
+		return 0
+	}
+	mi := MessageV2(m)
+	return protoV2.Size(mi)
+}
+
+// Marshal returns the wire-format encoding of m.
+func Marshal(m Message) ([]byte, error) {
+	b, err := marshalAppend(nil, m, false)
+	if b == nil {
+		b = zeroBytes
+	}
+	return b, err
+}
+
+var zeroBytes = make([]byte, 0, 0)
+
+func marshalAppend(buf []byte, m Message, deterministic bool) ([]byte, error) {
+	if m == nil {
+		return nil, ErrNil
+	}
+	mi := MessageV2(m)
+	nbuf, err := protoV2.MarshalOptions{
+		Deterministic: deterministic,
+		AllowPartial:  true,
+	}.MarshalAppend(buf, mi)
+	if err != nil {
+		return buf, err
+	}
+	if len(buf) == len(nbuf) {
+		if !mi.ProtoReflect().IsValid() {
+			return buf, ErrNil
+		}
+	}
+	return nbuf, checkRequiredNotSet(mi)
+}
+
+// Unmarshal parses a wire-format message in b and places the decoded results in m.
+//
+// Unmarshal resets m before starting to unmarshal, so any existing data in m is always
+// removed. Use UnmarshalMerge to preserve and append to existing data.
+func Unmarshal(b []byte, m Message) error {
+	m.Reset()
+	return UnmarshalMerge(b, m)
+}
+
+// UnmarshalMerge parses a wire-format message in b and places the decoded results in m.
+func UnmarshalMerge(b []byte, m Message) error {
+	mi := MessageV2(m)
+	out, err := protoV2.UnmarshalOptions{
+		AllowPartial: true,
+		Merge:        true,
+	}.UnmarshalState(protoiface.UnmarshalInput{
+		Buf:     b,
+		Message: mi.ProtoReflect(),
+	})
+	if err != nil {
+		return err
+	}
+	if out.Flags&protoiface.UnmarshalInitialized > 0 {
+		return nil
+	}
+	return checkRequiredNotSet(mi)
+}

vendor/github.com/golang/protobuf/proto/wrappers.go

@@ -0,0 +1,34 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package proto
+
+// Bool stores v in a new bool value and returns a pointer to it.
+func Bool(v bool) *bool { return &v }
+
+// Int stores v in a new int32 value and returns a pointer to it.
+//
+// Deprecated: Use Int32 instead.
+func Int(v int) *int32 { return Int32(int32(v)) }
+
+// Int32 stores v in a new int32 value and returns a pointer to it.
+func Int32(v int32) *int32 { return &v }
+
+// Int64 stores v in a new int64 value and returns a pointer to it.
+func Int64(v int64) *int64 { return &v }
+
+// Uint32 stores v in a new uint32 value and returns a pointer to it.
+func Uint32(v uint32) *uint32 { return &v }
+
+// Uint64 stores v in a new uint64 value and returns a pointer to it.
+func Uint64(v uint64) *uint64 { return &v }
+
+// Float32 stores v in a new float32 value and returns a pointer to it.
+func Float32(v float32) *float32 { return &v }
+
+// Float64 stores v in a new float64 value and returns a pointer to it.
+func Float64(v float64) *float64 { return &v }
+
+// String stores v in a new string value and returns a pointer to it.
+func String(v string) *string { return &v }

vendor/github.com/golang/snappy/.gitignore

@@ -0,0 +1,16 @@
+cmd/snappytool/snappytool
+testdata/bench
+
+# These explicitly listed benchmark data files are for an obsolete version of
+# snappy_test.go.
+testdata/alice29.txt
+testdata/asyoulik.txt
+testdata/fireworks.jpeg
+testdata/geo.protodata
+testdata/html
+testdata/html_x_4
+testdata/kppkn.gtb
+testdata/lcet10.txt
+testdata/paper-100k.pdf
+testdata/plrabn12.txt
+testdata/urls.10K

vendor/github.com/golang/snappy/AUTHORS

@@ -0,0 +1,18 @@
+# This is the official list of Snappy-Go authors for copyright purposes.
+# This file is distinct from the CONTRIBUTORS files.
+# See the latter for an explanation.
+
+# Names should be added to this file as
+#	Name or Organization <email address>
+# The email address is not required for organizations.
+
+# Please keep the list sorted.
+
+Amazon.com, Inc
+Damian Gryski <dgryski@gmail.com>
+Eric Buth <eric@topos.com>
+Google Inc.
+Jan Mercl <0xjnml@gmail.com>
+Klaus Post <klauspost@gmail.com>
+Rodolfo Carvalho <rhcarvalho@gmail.com>
+Sebastien Binet <seb.binet@gmail.com>

vendor/github.com/golang/snappy/CONTRIBUTORS

@@ -0,0 +1,41 @@
+# This is the official list of people who can contribute
+# (and typically have contributed) code to the Snappy-Go repository.
+# The AUTHORS file lists the copyright holders; this file
+# lists people.  For example, Google employees are listed here
+# but not in AUTHORS, because Google holds the copyright.
+#
+# The submission process automatically checks to make sure
+# that people submitting code are listed in this file (by email address).
+#
+# Names should be added to this file only after verifying that
+# the individual or the individual's organization has agreed to
+# the appropriate Contributor License Agreement, found here:
+#
+#     http://code.google.com/legal/individual-cla-v1.0.html
+#     http://code.google.com/legal/corporate-cla-v1.0.html
+#
+# The agreement for individuals can be filled out on the web.
+#
+# When adding J Random Contributor's name to this file,
+# either J's name or J's organization's name should be
+# added to the AUTHORS file, depending on whether the
+# individual or corporate CLA was used.
+
+# Names should be added to this file like so:
+#     Name <email address>
+
+# Please keep the list sorted.
+
+Alex Legg <alexlegg@google.com>
+Damian Gryski <dgryski@gmail.com>
+Eric Buth <eric@topos.com>
+Jan Mercl <0xjnml@gmail.com>
+Jonathan Swinney <jswinney@amazon.com>
+Kai Backman <kaib@golang.org>
+Klaus Post <klauspost@gmail.com>
+Marc-Antoine Ruel <maruel@chromium.org>
+Nigel Tao <nigeltao@golang.org>
+Rob Pike <r@golang.org>
+Rodolfo Carvalho <rhcarvalho@gmail.com>
+Russ Cox <rsc@golang.org>
+Sebastien Binet <seb.binet@gmail.com>

vendor/github.com/golang/snappy/LICENSE

@@ -0,0 +1,27 @@
+Copyright (c) 2011 The Snappy-Go Authors. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/github.com/golang/snappy/README

@@ -0,0 +1,107 @@
+The Snappy compression format in the Go programming language.
+
+To download and install from source:
+$ go get github.com/golang/snappy
+
+Unless otherwise noted, the Snappy-Go source files are distributed
+under the BSD-style license found in the LICENSE file.
+
+
+
+Benchmarks.
+
+The golang/snappy benchmarks include compressing (Z) and decompressing (U) ten
+or so files, the same set used by the C++ Snappy code (github.com/google/snappy
+and note the "google", not "golang"). On an "Intel(R) Core(TM) i7-3770 CPU @
+3.40GHz", Go's GOARCH=amd64 numbers as of 2016-05-29:
+
+"go test -test.bench=."
+
+_UFlat0-8         2.19GB/s ± 0%  html
+_UFlat1-8         1.41GB/s ± 0%  urls
+_UFlat2-8         23.5GB/s ± 2%  jpg
+_UFlat3-8         1.91GB/s ± 0%  jpg_200
+_UFlat4-8         14.0GB/s ± 1%  pdf
+_UFlat5-8         1.97GB/s ± 0%  html4
+_UFlat6-8          814MB/s ± 0%  txt1
+_UFlat7-8          785MB/s ± 0%  txt2
+_UFlat8-8          857MB/s ± 0%  txt3
+_UFlat9-8          719MB/s ± 1%  txt4
+_UFlat10-8        2.84GB/s ± 0%  pb
+_UFlat11-8        1.05GB/s ± 0%  gaviota
+
+_ZFlat0-8         1.04GB/s ± 0%  html
+_ZFlat1-8          534MB/s ± 0%  urls
+_ZFlat2-8         15.7GB/s ± 1%  jpg
+_ZFlat3-8          740MB/s ± 3%  jpg_200
+_ZFlat4-8         9.20GB/s ± 1%  pdf
+_ZFlat5-8          991MB/s ± 0%  html4
+_ZFlat6-8          379MB/s ± 0%  txt1
+_ZFlat7-8          352MB/s ± 0%  txt2
+_ZFlat8-8          396MB/s ± 1%  txt3
+_ZFlat9-8          327MB/s ± 1%  txt4
+_ZFlat10-8        1.33GB/s ± 1%  pb
+_ZFlat11-8         605MB/s ± 1%  gaviota
+
+
+
+"go test -test.bench=. -tags=noasm"
+
+_UFlat0-8          621MB/s ± 2%  html
+_UFlat1-8          494MB/s ± 1%  urls
+_UFlat2-8         23.2GB/s ± 1%  jpg
+_UFlat3-8         1.12GB/s ± 1%  jpg_200
+_UFlat4-8         4.35GB/s ± 1%  pdf
+_UFlat5-8          609MB/s ± 0%  html4
+_UFlat6-8          296MB/s ± 0%  txt1
+_UFlat7-8          288MB/s ± 0%  txt2
+_UFlat8-8          309MB/s ± 1%  txt3
+_UFlat9-8          280MB/s ± 1%  txt4
+_UFlat10-8         753MB/s ± 0%  pb
+_UFlat11-8         400MB/s ± 0%  gaviota
+
+_ZFlat0-8          409MB/s ± 1%  html
+_ZFlat1-8          250MB/s ± 1%  urls
+_ZFlat2-8         12.3GB/s ± 1%  jpg
+_ZFlat3-8          132MB/s ± 0%  jpg_200
+_ZFlat4-8         2.92GB/s ± 0%  pdf
+_ZFlat5-8          405MB/s ± 1%  html4
+_ZFlat6-8          179MB/s ± 1%  txt1
+_ZFlat7-8          170MB/s ± 1%  txt2
+_ZFlat8-8          189MB/s ± 1%  txt3
+_ZFlat9-8          164MB/s ± 1%  txt4
+_ZFlat10-8         479MB/s ± 1%  pb
+_ZFlat11-8         270MB/s ± 1%  gaviota
+
+
+
+For comparison (Go's encoded output is byte-for-byte identical to C++'s), here
+are the numbers from C++ Snappy's
+
+make CXXFLAGS="-O2 -DNDEBUG -g" clean snappy_unittest.log && cat snappy_unittest.log
+
+BM_UFlat/0     2.4GB/s  html
+BM_UFlat/1     1.4GB/s  urls
+BM_UFlat/2    21.8GB/s  jpg
+BM_UFlat/3     1.5GB/s  jpg_200
+BM_UFlat/4    13.3GB/s  pdf
+BM_UFlat/5     2.1GB/s  html4
+BM_UFlat/6     1.0GB/s  txt1
+BM_UFlat/7   959.4MB/s  txt2
+BM_UFlat/8     1.0GB/s  txt3
+BM_UFlat/9   864.5MB/s  txt4
+BM_UFlat/10    2.9GB/s  pb
+BM_UFlat/11    1.2GB/s  gaviota
+
+BM_ZFlat/0   944.3MB/s  html (22.31 %)
+BM_ZFlat/1   501.6MB/s  urls (47.78 %)
+BM_ZFlat/2    14.3GB/s  jpg (99.95 %)
+BM_ZFlat/3   538.3MB/s  jpg_200 (73.00 %)
+BM_ZFlat/4     8.3GB/s  pdf (83.30 %)
+BM_ZFlat/5   903.5MB/s  html4 (22.52 %)
+BM_ZFlat/6   336.0MB/s  txt1 (57.88 %)
+BM_ZFlat/7   312.3MB/s  txt2 (61.91 %)
+BM_ZFlat/8   353.1MB/s  txt3 (54.99 %)
+BM_ZFlat/9   289.9MB/s  txt4 (66.26 %)
+BM_ZFlat/10    1.2GB/s  pb (19.68 %)
+BM_ZFlat/11  527.4MB/s  gaviota (37.72 %)

vendor/github.com/golang/snappy/decode.go

@@ -0,0 +1,264 @@
+// Copyright 2011 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package snappy
+
+import (
+	"encoding/binary"
+	"errors"
+	"io"
+)
+
+var (
+	// ErrCorrupt reports that the input is invalid.
+	ErrCorrupt = errors.New("snappy: corrupt input")
+	// ErrTooLarge reports that the uncompressed length is too large.
+	ErrTooLarge = errors.New("snappy: decoded block is too large")
+	// ErrUnsupported reports that the input isn't supported.
+	ErrUnsupported = errors.New("snappy: unsupported input")
+
+	errUnsupportedLiteralLength = errors.New("snappy: unsupported literal length")
+)
+
+// DecodedLen returns the length of the decoded block.
+func DecodedLen(src []byte) (int, error) {
+	v, _, err := decodedLen(src)
+	return v, err
+}
+
+// decodedLen returns the length of the decoded block and the number of bytes
+// that the length header occupied.
+func decodedLen(src []byte) (blockLen, headerLen int, err error) {
+	v, n := binary.Uvarint(src)
+	if n <= 0 || v > 0xffffffff {
+		return 0, 0, ErrCorrupt
+	}
+
+	const wordSize = 32 << (^uint(0) >> 32 & 1)
+	if wordSize == 32 && v > 0x7fffffff {
+		return 0, 0, ErrTooLarge
+	}
+	return int(v), n, nil
+}
+
+const (
+	decodeErrCodeCorrupt                  = 1
+	decodeErrCodeUnsupportedLiteralLength = 2
+)
+
+// Decode returns the decoded form of src. The returned slice may be a sub-
+// slice of dst if dst was large enough to hold the entire decoded block.
+// Otherwise, a newly allocated slice will be returned.
+//
+// The dst and src must not overlap. It is valid to pass a nil dst.
+//
+// Decode handles the Snappy block format, not the Snappy stream format.
+func Decode(dst, src []byte) ([]byte, error) {
+	dLen, s, err := decodedLen(src)
+	if err != nil {
+		return nil, err
+	}
+	if dLen <= len(dst) {
+		dst = dst[:dLen]
+	} else {
+		dst = make([]byte, dLen)
+	}
+	switch decode(dst, src[s:]) {
+	case 0:
+		return dst, nil
+	case decodeErrCodeUnsupportedLiteralLength:
+		return nil, errUnsupportedLiteralLength
+	}
+	return nil, ErrCorrupt
+}
+
+// NewReader returns a new Reader that decompresses from r, using the framing
+// format described at
+// https://github.com/google/snappy/blob/master/framing_format.txt
+func NewReader(r io.Reader) *Reader {
+	return &Reader{
+		r:       r,
+		decoded: make([]byte, maxBlockSize),
+		buf:     make([]byte, maxEncodedLenOfMaxBlockSize+checksumSize),
+	}
+}
+
+// Reader is an io.Reader that can read Snappy-compressed bytes.
+//
+// Reader handles the Snappy stream format, not the Snappy block format.
+type Reader struct {
+	r       io.Reader
+	err     error
+	decoded []byte
+	buf     []byte
+	// decoded[i:j] contains decoded bytes that have not yet been passed on.
+	i, j       int
+	readHeader bool
+}
+
+// Reset discards any buffered data, resets all state, and switches the Snappy
+// reader to read from r. This permits reusing a Reader rather than allocating
+// a new one.
+func (r *Reader) Reset(reader io.Reader) {
+	r.r = reader
+	r.err = nil
+	r.i = 0
+	r.j = 0
+	r.readHeader = false
+}
+
+func (r *Reader) readFull(p []byte, allowEOF bool) (ok bool) {
+	if _, r.err = io.ReadFull(r.r, p); r.err != nil {
+		if r.err == io.ErrUnexpectedEOF || (r.err == io.EOF && !allowEOF) {
+			r.err = ErrCorrupt
+		}
+		return false
+	}
+	return true
+}
+
+func (r *Reader) fill() error {
+	for r.i >= r.j {
+		if !r.readFull(r.buf[:4], true) {
+			return r.err
+		}
+		chunkType := r.buf[0]
+		if !r.readHeader {
+			if chunkType != chunkTypeStreamIdentifier {
+				r.err = ErrCorrupt
+				return r.err
+			}
+			r.readHeader = true
+		}
+		chunkLen := int(r.buf[1]) | int(r.buf[2])<<8 | int(r.buf[3])<<16
+		if chunkLen > len(r.buf) {
+			r.err = ErrUnsupported
+			return r.err
+		}
+
+		// The chunk types are specified at
+		// https://github.com/google/snappy/blob/master/framing_format.txt
+		switch chunkType {
+		case chunkTypeCompressedData:
+			// Section 4.2. Compressed data (chunk type 0x00).
+			if chunkLen < checksumSize {
+				r.err = ErrCorrupt
+				return r.err
+			}
+			buf := r.buf[:chunkLen]
+			if !r.readFull(buf, false) {
+				return r.err
+			}
+			checksum := uint32(buf[0]) | uint32(buf[1])<<8 | uint32(buf[2])<<16 | uint32(buf[3])<<24
+			buf = buf[checksumSize:]
+
+			n, err := DecodedLen(buf)
+			if err != nil {
+				r.err = err
+				return r.err
+			}
+			if n > len(r.decoded) {
+				r.err = ErrCorrupt
+				return r.err
+			}
+			if _, err := Decode(r.decoded, buf); err != nil {
+				r.err = err
+				return r.err
+			}
+			if crc(r.decoded[:n]) != checksum {
+				r.err = ErrCorrupt
+				return r.err
+			}
+			r.i, r.j = 0, n
+			continue
+
+		case chunkTypeUncompressedData:
+			// Section 4.3. Uncompressed data (chunk type 0x01).
+			if chunkLen < checksumSize {
+				r.err = ErrCorrupt
+				return r.err
+			}
+			buf := r.buf[:checksumSize]
+			if !r.readFull(buf, false) {
+				return r.err
+			}
+			checksum := uint32(buf[0]) | uint32(buf[1])<<8 | uint32(buf[2])<<16 | uint32(buf[3])<<24
+			// Read directly into r.decoded instead of via r.buf.
+			n := chunkLen - checksumSize
+			if n > len(r.decoded) {
+				r.err = ErrCorrupt
+				return r.err
+			}
+			if !r.readFull(r.decoded[:n], false) {
+				return r.err
+			}
+			if crc(r.decoded[:n]) != checksum {
+				r.err = ErrCorrupt
+				return r.err
+			}
+			r.i, r.j = 0, n
+			continue
+
+		case chunkTypeStreamIdentifier:
+			// Section 4.1. Stream identifier (chunk type 0xff).
+			if chunkLen != len(magicBody) {
+				r.err = ErrCorrupt
+				return r.err
+			}
+			if !r.readFull(r.buf[:len(magicBody)], false) {
+				return r.err
+			}
+			for i := 0; i < len(magicBody); i++ {
+				if r.buf[i] != magicBody[i] {
+					r.err = ErrCorrupt
+					return r.err
+				}
+			}
+			continue
+		}
+
+		if chunkType <= 0x7f {
+			// Section 4.5. Reserved unskippable chunks (chunk types 0x02-0x7f).
+			r.err = ErrUnsupported
+			return r.err
+		}
+		// Section 4.4 Padding (chunk type 0xfe).
+		// Section 4.6. Reserved skippable chunks (chunk types 0x80-0xfd).
+		if !r.readFull(r.buf[:chunkLen], false) {
+			return r.err
+		}
+	}
+
+	return nil
+}
+
+// Read satisfies the io.Reader interface.
+func (r *Reader) Read(p []byte) (int, error) {
+	if r.err != nil {
+		return 0, r.err
+	}
+
+	if err := r.fill(); err != nil {
+		return 0, err
+	}
+
+	n := copy(p, r.decoded[r.i:r.j])
+	r.i += n
+	return n, nil
+}
+
+// ReadByte satisfies the io.ByteReader interface.
+func (r *Reader) ReadByte() (byte, error) {
+	if r.err != nil {
+		return 0, r.err
+	}
+
+	if err := r.fill(); err != nil {
+		return 0, err
+	}
+
+	c := r.decoded[r.i]
+	r.i++
+	return c, nil
+}

vendor/github.com/golang/snappy/decode_amd64.s

@@ -0,0 +1,490 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+
+#include "textflag.h"
+
+// The asm code generally follows the pure Go code in decode_other.go, except
+// where marked with a "!!!".
+
+// func decode(dst, src []byte) int
+//
+// All local variables fit into registers. The non-zero stack size is only to
+// spill registers and push args when issuing a CALL. The register allocation:
+//	- AX	scratch
+//	- BX	scratch
+//	- CX	length or x
+//	- DX	offset
+//	- SI	&src[s]
+//	- DI	&dst[d]
+//	+ R8	dst_base
+//	+ R9	dst_len
+//	+ R10	dst_base + dst_len
+//	+ R11	src_base
+//	+ R12	src_len
+//	+ R13	src_base + src_len
+//	- R14	used by doCopy
+//	- R15	used by doCopy
+//
+// The registers R8-R13 (marked with a "+") are set at the start of the
+// function, and after a CALL returns, and are not otherwise modified.
+//
+// The d variable is implicitly DI - R8,  and len(dst)-d is R10 - DI.
+// The s variable is implicitly SI - R11, and len(src)-s is R13 - SI.
+TEXT ·decode(SB), NOSPLIT, $48-56
+	// Initialize SI, DI and R8-R13.
+	MOVQ dst_base+0(FP), R8
+	MOVQ dst_len+8(FP), R9
+	MOVQ R8, DI
+	MOVQ R8, R10
+	ADDQ R9, R10
+	MOVQ src_base+24(FP), R11
+	MOVQ src_len+32(FP), R12
+	MOVQ R11, SI
+	MOVQ R11, R13
+	ADDQ R12, R13
+
+loop:
+	// for s < len(src)
+	CMPQ SI, R13
+	JEQ  end
+
+	// CX = uint32(src[s])
+	//
+	// switch src[s] & 0x03
+	MOVBLZX (SI), CX
+	MOVL    CX, BX
+	ANDL    $3, BX
+	CMPL    BX, $1
+	JAE     tagCopy
+
+	// ----------------------------------------
+	// The code below handles literal tags.
+
+	// case tagLiteral:
+	// x := uint32(src[s] >> 2)
+	// switch
+	SHRL $2, CX
+	CMPL CX, $60
+	JAE  tagLit60Plus
+
+	// case x < 60:
+	// s++
+	INCQ SI
+
+doLit:
+	// This is the end of the inner "switch", when we have a literal tag.
+	//
+	// We assume that CX == x and x fits in a uint32, where x is the variable
+	// used in the pure Go decode_other.go code.
+
+	// length = int(x) + 1
+	//
+	// Unlike the pure Go code, we don't need to check if length <= 0 because
+	// CX can hold 64 bits, so the increment cannot overflow.
+	INCQ CX
+
+	// Prepare to check if copying length bytes will run past the end of dst or
+	// src.
+	//
+	// AX = len(dst) - d
+	// BX = len(src) - s
+	MOVQ R10, AX
+	SUBQ DI, AX
+	MOVQ R13, BX
+	SUBQ SI, BX
+
+	// !!! Try a faster technique for short (16 or fewer bytes) copies.
+	//
+	// if length > 16 || len(dst)-d < 16 || len(src)-s < 16 {
+	//   goto callMemmove // Fall back on calling runtime·memmove.
+	// }
+	//
+	// The C++ snappy code calls this TryFastAppend. It also checks len(src)-s
+	// against 21 instead of 16, because it cannot assume that all of its input
+	// is contiguous in memory and so it needs to leave enough source bytes to
+	// read the next tag without refilling buffers, but Go's Decode assumes
+	// contiguousness (the src argument is a []byte).
+	CMPQ CX, $16
+	JGT  callMemmove
+	CMPQ AX, $16
+	JLT  callMemmove
+	CMPQ BX, $16
+	JLT  callMemmove
+
+	// !!! Implement the copy from src to dst as a 16-byte load and store.
+	// (Decode's documentation says that dst and src must not overlap.)
+	//
+	// This always copies 16 bytes, instead of only length bytes, but that's
+	// OK. If the input is a valid Snappy encoding then subsequent iterations
+	// will fix up the overrun. Otherwise, Decode returns a nil []byte (and a
+	// non-nil error), so the overrun will be ignored.
+	//
+	// Note that on amd64, it is legal and cheap to issue unaligned 8-byte or
+	// 16-byte loads and stores. This technique probably wouldn't be as
+	// effective on architectures that are fussier about alignment.
+	MOVOU 0(SI), X0
+	MOVOU X0, 0(DI)
+
+	// d += length
+	// s += length
+	ADDQ CX, DI
+	ADDQ CX, SI
+	JMP  loop
+
+callMemmove:
+	// if length > len(dst)-d || length > len(src)-s { etc }
+	CMPQ CX, AX
+	JGT  errCorrupt
+	CMPQ CX, BX
+	JGT  errCorrupt
+
+	// copy(dst[d:], src[s:s+length])
+	//
+	// This means calling runtime·memmove(&dst[d], &src[s], length), so we push
+	// DI, SI and CX as arguments. Coincidentally, we also need to spill those
+	// three registers to the stack, to save local variables across the CALL.
+	MOVQ DI, 0(SP)
+	MOVQ SI, 8(SP)
+	MOVQ CX, 16(SP)
+	MOVQ DI, 24(SP)
+	MOVQ SI, 32(SP)
+	MOVQ CX, 40(SP)
+	CALL runtime·memmove(SB)
+
+	// Restore local variables: unspill registers from the stack and
+	// re-calculate R8-R13.
+	MOVQ 24(SP), DI
+	MOVQ 32(SP), SI
+	MOVQ 40(SP), CX
+	MOVQ dst_base+0(FP), R8
+	MOVQ dst_len+8(FP), R9
+	MOVQ R8, R10
+	ADDQ R9, R10
+	MOVQ src_base+24(FP), R11
+	MOVQ src_len+32(FP), R12
+	MOVQ R11, R13
+	ADDQ R12, R13
+
+	// d += length
+	// s += length
+	ADDQ CX, DI
+	ADDQ CX, SI
+	JMP  loop
+
+tagLit60Plus:
+	// !!! This fragment does the
+	//
+	// s += x - 58; if uint(s) > uint(len(src)) { etc }
+	//
+	// checks. In the asm version, we code it once instead of once per switch case.
+	ADDQ CX, SI
+	SUBQ $58, SI
+	MOVQ SI, BX
+	SUBQ R11, BX
+	CMPQ BX, R12
+	JA   errCorrupt
+
+	// case x == 60:
+	CMPL CX, $61
+	JEQ  tagLit61
+	JA   tagLit62Plus
+
+	// x = uint32(src[s-1])
+	MOVBLZX -1(SI), CX
+	JMP     doLit
+
+tagLit61:
+	// case x == 61:
+	// x = uint32(src[s-2]) | uint32(src[s-1])<<8
+	MOVWLZX -2(SI), CX
+	JMP     doLit
+
+tagLit62Plus:
+	CMPL CX, $62
+	JA   tagLit63
+
+	// case x == 62:
+	// x = uint32(src[s-3]) | uint32(src[s-2])<<8 | uint32(src[s-1])<<16
+	MOVWLZX -3(SI), CX
+	MOVBLZX -1(SI), BX
+	SHLL    $16, BX
+	ORL     BX, CX
+	JMP     doLit
+
+tagLit63:
+	// case x == 63:
+	// x = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24
+	MOVL -4(SI), CX
+	JMP  doLit
+
+// The code above handles literal tags.
+// ----------------------------------------
+// The code below handles copy tags.
+
+tagCopy4:
+	// case tagCopy4:
+	// s += 5
+	ADDQ $5, SI
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVQ SI, BX
+	SUBQ R11, BX
+	CMPQ BX, R12
+	JA   errCorrupt
+
+	// length = 1 + int(src[s-5])>>2
+	SHRQ $2, CX
+	INCQ CX
+
+	// offset = int(uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24)
+	MOVLQZX -4(SI), DX
+	JMP     doCopy
+
+tagCopy2:
+	// case tagCopy2:
+	// s += 3
+	ADDQ $3, SI
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVQ SI, BX
+	SUBQ R11, BX
+	CMPQ BX, R12
+	JA   errCorrupt
+
+	// length = 1 + int(src[s-3])>>2
+	SHRQ $2, CX
+	INCQ CX
+
+	// offset = int(uint32(src[s-2]) | uint32(src[s-1])<<8)
+	MOVWQZX -2(SI), DX
+	JMP     doCopy
+
+tagCopy:
+	// We have a copy tag. We assume that:
+	//	- BX == src[s] & 0x03
+	//	- CX == src[s]
+	CMPQ BX, $2
+	JEQ  tagCopy2
+	JA   tagCopy4
+
+	// case tagCopy1:
+	// s += 2
+	ADDQ $2, SI
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVQ SI, BX
+	SUBQ R11, BX
+	CMPQ BX, R12
+	JA   errCorrupt
+
+	// offset = int(uint32(src[s-2])&0xe0<<3 | uint32(src[s-1]))
+	MOVQ    CX, DX
+	ANDQ    $0xe0, DX
+	SHLQ    $3, DX
+	MOVBQZX -1(SI), BX
+	ORQ     BX, DX
+
+	// length = 4 + int(src[s-2])>>2&0x7
+	SHRQ $2, CX
+	ANDQ $7, CX
+	ADDQ $4, CX
+
+doCopy:
+	// This is the end of the outer "switch", when we have a copy tag.
+	//
+	// We assume that:
+	//	- CX == length && CX > 0
+	//	- DX == offset
+
+	// if offset <= 0 { etc }
+	CMPQ DX, $0
+	JLE  errCorrupt
+
+	// if d < offset { etc }
+	MOVQ DI, BX
+	SUBQ R8, BX
+	CMPQ BX, DX
+	JLT  errCorrupt
+
+	// if length > len(dst)-d { etc }
+	MOVQ R10, BX
+	SUBQ DI, BX
+	CMPQ CX, BX
+	JGT  errCorrupt
+
+	// forwardCopy(dst[d:d+length], dst[d-offset:]); d += length
+	//
+	// Set:
+	//	- R14 = len(dst)-d
+	//	- R15 = &dst[d-offset]
+	MOVQ R10, R14
+	SUBQ DI, R14
+	MOVQ DI, R15
+	SUBQ DX, R15
+
+	// !!! Try a faster technique for short (16 or fewer bytes) forward copies.
+	//
+	// First, try using two 8-byte load/stores, similar to the doLit technique
+	// above. Even if dst[d:d+length] and dst[d-offset:] can overlap, this is
+	// still OK if offset >= 8. Note that this has to be two 8-byte load/stores
+	// and not one 16-byte load/store, and the first store has to be before the
+	// second load, due to the overlap if offset is in the range [8, 16).
+	//
+	// if length > 16 || offset < 8 || len(dst)-d < 16 {
+	//   goto slowForwardCopy
+	// }
+	// copy 16 bytes
+	// d += length
+	CMPQ CX, $16
+	JGT  slowForwardCopy
+	CMPQ DX, $8
+	JLT  slowForwardCopy
+	CMPQ R14, $16
+	JLT  slowForwardCopy
+	MOVQ 0(R15), AX
+	MOVQ AX, 0(DI)
+	MOVQ 8(R15), BX
+	MOVQ BX, 8(DI)
+	ADDQ CX, DI
+	JMP  loop
+
+slowForwardCopy:
+	// !!! If the forward copy is longer than 16 bytes, or if offset < 8, we
+	// can still try 8-byte load stores, provided we can overrun up to 10 extra
+	// bytes. As above, the overrun will be fixed up by subsequent iterations
+	// of the outermost loop.
+	//
+	// The C++ snappy code calls this technique IncrementalCopyFastPath. Its
+	// commentary says:
+	//
+	// ----
+	//
+	// The main part of this loop is a simple copy of eight bytes at a time
+	// until we've copied (at least) the requested amount of bytes.  However,
+	// if d and d-offset are less than eight bytes apart (indicating a
+	// repeating pattern of length < 8), we first need to expand the pattern in
+	// order to get the correct results. For instance, if the buffer looks like
+	// this, with the eight-byte <d-offset> and <d> patterns marked as
+	// intervals:
+	//
+	//    abxxxxxxxxxxxx
+	//    [------]           d-offset
+	//      [------]         d
+	//
+	// a single eight-byte copy from <d-offset> to <d> will repeat the pattern
+	// once, after which we can move <d> two bytes without moving <d-offset>:
+	//
+	//    ababxxxxxxxxxx
+	//    [------]           d-offset
+	//        [------]       d
+	//
+	// and repeat the exercise until the two no longer overlap.
+	//
+	// This allows us to do very well in the special case of one single byte
+	// repeated many times, without taking a big hit for more general cases.
+	//
+	// The worst case of extra writing past the end of the match occurs when
+	// offset == 1 and length == 1; the last copy will read from byte positions
+	// [0..7] and write to [4..11], whereas it was only supposed to write to
+	// position 1. Thus, ten excess bytes.
+	//
+	// ----
+	//
+	// That "10 byte overrun" worst case is confirmed by Go's
+	// TestSlowForwardCopyOverrun, which also tests the fixUpSlowForwardCopy
+	// and finishSlowForwardCopy algorithm.
+	//
+	// if length > len(dst)-d-10 {
+	//   goto verySlowForwardCopy
+	// }
+	SUBQ $10, R14
+	CMPQ CX, R14
+	JGT  verySlowForwardCopy
+
+makeOffsetAtLeast8:
+	// !!! As above, expand the pattern so that offset >= 8 and we can use
+	// 8-byte load/stores.
+	//
+	// for offset < 8 {
+	//   copy 8 bytes from dst[d-offset:] to dst[d:]
+	//   length -= offset
+	//   d      += offset
+	//   offset += offset
+	//   // The two previous lines together means that d-offset, and therefore
+	//   // R15, is unchanged.
+	// }
+	CMPQ DX, $8
+	JGE  fixUpSlowForwardCopy
+	MOVQ (R15), BX
+	MOVQ BX, (DI)
+	SUBQ DX, CX
+	ADDQ DX, DI
+	ADDQ DX, DX
+	JMP  makeOffsetAtLeast8
+
+fixUpSlowForwardCopy:
+	// !!! Add length (which might be negative now) to d (implied by DI being
+	// &dst[d]) so that d ends up at the right place when we jump back to the
+	// top of the loop. Before we do that, though, we save DI to AX so that, if
+	// length is positive, copying the remaining length bytes will write to the
+	// right place.
+	MOVQ DI, AX
+	ADDQ CX, DI
+
+finishSlowForwardCopy:
+	// !!! Repeat 8-byte load/stores until length <= 0. Ending with a negative
+	// length means that we overrun, but as above, that will be fixed up by
+	// subsequent iterations of the outermost loop.
+	CMPQ CX, $0
+	JLE  loop
+	MOVQ (R15), BX
+	MOVQ BX, (AX)
+	ADDQ $8, R15
+	ADDQ $8, AX
+	SUBQ $8, CX
+	JMP  finishSlowForwardCopy
+
+verySlowForwardCopy:
+	// verySlowForwardCopy is a simple implementation of forward copy. In C
+	// parlance, this is a do/while loop instead of a while loop, since we know
+	// that length > 0. In Go syntax:
+	//
+	// for {
+	//   dst[d] = dst[d - offset]
+	//   d++
+	//   length--
+	//   if length == 0 {
+	//     break
+	//   }
+	// }
+	MOVB (R15), BX
+	MOVB BX, (DI)
+	INCQ R15
+	INCQ DI
+	DECQ CX
+	JNZ  verySlowForwardCopy
+	JMP  loop
+
+// The code above handles copy tags.
+// ----------------------------------------
+
+end:
+	// This is the end of the "for s < len(src)".
+	//
+	// if d != len(dst) { etc }
+	CMPQ DI, R10
+	JNE  errCorrupt
+
+	// return 0
+	MOVQ $0, ret+48(FP)
+	RET
+
+errCorrupt:
+	// return decodeErrCodeCorrupt
+	MOVQ $1, ret+48(FP)
+	RET

vendor/github.com/golang/snappy/decode_arm64.s

@@ -0,0 +1,494 @@
+// Copyright 2020 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+
+#include "textflag.h"
+
+// The asm code generally follows the pure Go code in decode_other.go, except
+// where marked with a "!!!".
+
+// func decode(dst, src []byte) int
+//
+// All local variables fit into registers. The non-zero stack size is only to
+// spill registers and push args when issuing a CALL. The register allocation:
+//	- R2	scratch
+//	- R3	scratch
+//	- R4	length or x
+//	- R5	offset
+//	- R6	&src[s]
+//	- R7	&dst[d]
+//	+ R8	dst_base
+//	+ R9	dst_len
+//	+ R10	dst_base + dst_len
+//	+ R11	src_base
+//	+ R12	src_len
+//	+ R13	src_base + src_len
+//	- R14	used by doCopy
+//	- R15	used by doCopy
+//
+// The registers R8-R13 (marked with a "+") are set at the start of the
+// function, and after a CALL returns, and are not otherwise modified.
+//
+// The d variable is implicitly R7 - R8,  and len(dst)-d is R10 - R7.
+// The s variable is implicitly R6 - R11, and len(src)-s is R13 - R6.
+TEXT ·decode(SB), NOSPLIT, $56-56
+	// Initialize R6, R7 and R8-R13.
+	MOVD dst_base+0(FP), R8
+	MOVD dst_len+8(FP), R9
+	MOVD R8, R7
+	MOVD R8, R10
+	ADD  R9, R10, R10
+	MOVD src_base+24(FP), R11
+	MOVD src_len+32(FP), R12
+	MOVD R11, R6
+	MOVD R11, R13
+	ADD  R12, R13, R13
+
+loop:
+	// for s < len(src)
+	CMP R13, R6
+	BEQ end
+
+	// R4 = uint32(src[s])
+	//
+	// switch src[s] & 0x03
+	MOVBU (R6), R4
+	MOVW  R4, R3
+	ANDW  $3, R3
+	MOVW  $1, R1
+	CMPW  R1, R3
+	BGE   tagCopy
+
+	// ----------------------------------------
+	// The code below handles literal tags.
+
+	// case tagLiteral:
+	// x := uint32(src[s] >> 2)
+	// switch
+	MOVW $60, R1
+	LSRW $2, R4, R4
+	CMPW R4, R1
+	BLS  tagLit60Plus
+
+	// case x < 60:
+	// s++
+	ADD $1, R6, R6
+
+doLit:
+	// This is the end of the inner "switch", when we have a literal tag.
+	//
+	// We assume that R4 == x and x fits in a uint32, where x is the variable
+	// used in the pure Go decode_other.go code.
+
+	// length = int(x) + 1
+	//
+	// Unlike the pure Go code, we don't need to check if length <= 0 because
+	// R4 can hold 64 bits, so the increment cannot overflow.
+	ADD $1, R4, R4
+
+	// Prepare to check if copying length bytes will run past the end of dst or
+	// src.
+	//
+	// R2 = len(dst) - d
+	// R3 = len(src) - s
+	MOVD R10, R2
+	SUB  R7, R2, R2
+	MOVD R13, R3
+	SUB  R6, R3, R3
+
+	// !!! Try a faster technique for short (16 or fewer bytes) copies.
+	//
+	// if length > 16 || len(dst)-d < 16 || len(src)-s < 16 {
+	//   goto callMemmove // Fall back on calling runtime·memmove.
+	// }
+	//
+	// The C++ snappy code calls this TryFastAppend. It also checks len(src)-s
+	// against 21 instead of 16, because it cannot assume that all of its input
+	// is contiguous in memory and so it needs to leave enough source bytes to
+	// read the next tag without refilling buffers, but Go's Decode assumes
+	// contiguousness (the src argument is a []byte).
+	CMP $16, R4
+	BGT callMemmove
+	CMP $16, R2
+	BLT callMemmove
+	CMP $16, R3
+	BLT callMemmove
+
+	// !!! Implement the copy from src to dst as a 16-byte load and store.
+	// (Decode's documentation says that dst and src must not overlap.)
+	//
+	// This always copies 16 bytes, instead of only length bytes, but that's
+	// OK. If the input is a valid Snappy encoding then subsequent iterations
+	// will fix up the overrun. Otherwise, Decode returns a nil []byte (and a
+	// non-nil error), so the overrun will be ignored.
+	//
+	// Note that on arm64, it is legal and cheap to issue unaligned 8-byte or
+	// 16-byte loads and stores. This technique probably wouldn't be as
+	// effective on architectures that are fussier about alignment.
+	LDP 0(R6), (R14, R15)
+	STP (R14, R15), 0(R7)
+
+	// d += length
+	// s += length
+	ADD R4, R7, R7
+	ADD R4, R6, R6
+	B   loop
+
+callMemmove:
+	// if length > len(dst)-d || length > len(src)-s { etc }
+	CMP R2, R4
+	BGT errCorrupt
+	CMP R3, R4
+	BGT errCorrupt
+
+	// copy(dst[d:], src[s:s+length])
+	//
+	// This means calling runtime·memmove(&dst[d], &src[s], length), so we push
+	// R7, R6 and R4 as arguments. Coincidentally, we also need to spill those
+	// three registers to the stack, to save local variables across the CALL.
+	MOVD R7, 8(RSP)
+	MOVD R6, 16(RSP)
+	MOVD R4, 24(RSP)
+	MOVD R7, 32(RSP)
+	MOVD R6, 40(RSP)
+	MOVD R4, 48(RSP)
+	CALL runtime·memmove(SB)
+
+	// Restore local variables: unspill registers from the stack and
+	// re-calculate R8-R13.
+	MOVD 32(RSP), R7
+	MOVD 40(RSP), R6
+	MOVD 48(RSP), R4
+	MOVD dst_base+0(FP), R8
+	MOVD dst_len+8(FP), R9
+	MOVD R8, R10
+	ADD  R9, R10, R10
+	MOVD src_base+24(FP), R11
+	MOVD src_len+32(FP), R12
+	MOVD R11, R13
+	ADD  R12, R13, R13
+
+	// d += length
+	// s += length
+	ADD R4, R7, R7
+	ADD R4, R6, R6
+	B   loop
+
+tagLit60Plus:
+	// !!! This fragment does the
+	//
+	// s += x - 58; if uint(s) > uint(len(src)) { etc }
+	//
+	// checks. In the asm version, we code it once instead of once per switch case.
+	ADD  R4, R6, R6
+	SUB  $58, R6, R6
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// case x == 60:
+	MOVW $61, R1
+	CMPW R1, R4
+	BEQ  tagLit61
+	BGT  tagLit62Plus
+
+	// x = uint32(src[s-1])
+	MOVBU -1(R6), R4
+	B     doLit
+
+tagLit61:
+	// case x == 61:
+	// x = uint32(src[s-2]) | uint32(src[s-1])<<8
+	MOVHU -2(R6), R4
+	B     doLit
+
+tagLit62Plus:
+	CMPW $62, R4
+	BHI  tagLit63
+
+	// case x == 62:
+	// x = uint32(src[s-3]) | uint32(src[s-2])<<8 | uint32(src[s-1])<<16
+	MOVHU -3(R6), R4
+	MOVBU -1(R6), R3
+	ORR   R3<<16, R4
+	B     doLit
+
+tagLit63:
+	// case x == 63:
+	// x = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24
+	MOVWU -4(R6), R4
+	B     doLit
+
+	// The code above handles literal tags.
+	// ----------------------------------------
+	// The code below handles copy tags.
+
+tagCopy4:
+	// case tagCopy4:
+	// s += 5
+	ADD $5, R6, R6
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// length = 1 + int(src[s-5])>>2
+	MOVD $1, R1
+	ADD  R4>>2, R1, R4
+
+	// offset = int(uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24)
+	MOVWU -4(R6), R5
+	B     doCopy
+
+tagCopy2:
+	// case tagCopy2:
+	// s += 3
+	ADD $3, R6, R6
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// length = 1 + int(src[s-3])>>2
+	MOVD $1, R1
+	ADD  R4>>2, R1, R4
+
+	// offset = int(uint32(src[s-2]) | uint32(src[s-1])<<8)
+	MOVHU -2(R6), R5
+	B     doCopy
+
+tagCopy:
+	// We have a copy tag. We assume that:
+	//	- R3 == src[s] & 0x03
+	//	- R4 == src[s]
+	CMP $2, R3
+	BEQ tagCopy2
+	BGT tagCopy4
+
+	// case tagCopy1:
+	// s += 2
+	ADD $2, R6, R6
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// offset = int(uint32(src[s-2])&0xe0<<3 | uint32(src[s-1]))
+	MOVD  R4, R5
+	AND   $0xe0, R5
+	MOVBU -1(R6), R3
+	ORR   R5<<3, R3, R5
+
+	// length = 4 + int(src[s-2])>>2&0x7
+	MOVD $7, R1
+	AND  R4>>2, R1, R4
+	ADD  $4, R4, R4
+
+doCopy:
+	// This is the end of the outer "switch", when we have a copy tag.
+	//
+	// We assume that:
+	//	- R4 == length && R4 > 0
+	//	- R5 == offset
+
+	// if offset <= 0 { etc }
+	MOVD $0, R1
+	CMP  R1, R5
+	BLE  errCorrupt
+
+	// if d < offset { etc }
+	MOVD R7, R3
+	SUB  R8, R3, R3
+	CMP  R5, R3
+	BLT  errCorrupt
+
+	// if length > len(dst)-d { etc }
+	MOVD R10, R3
+	SUB  R7, R3, R3
+	CMP  R3, R4
+	BGT  errCorrupt
+
+	// forwardCopy(dst[d:d+length], dst[d-offset:]); d += length
+	//
+	// Set:
+	//	- R14 = len(dst)-d
+	//	- R15 = &dst[d-offset]
+	MOVD R10, R14
+	SUB  R7, R14, R14
+	MOVD R7, R15
+	SUB  R5, R15, R15
+
+	// !!! Try a faster technique for short (16 or fewer bytes) forward copies.
+	//
+	// First, try using two 8-byte load/stores, similar to the doLit technique
+	// above. Even if dst[d:d+length] and dst[d-offset:] can overlap, this is
+	// still OK if offset >= 8. Note that this has to be two 8-byte load/stores
+	// and not one 16-byte load/store, and the first store has to be before the
+	// second load, due to the overlap if offset is in the range [8, 16).
+	//
+	// if length > 16 || offset < 8 || len(dst)-d < 16 {
+	//   goto slowForwardCopy
+	// }
+	// copy 16 bytes
+	// d += length
+	CMP  $16, R4
+	BGT  slowForwardCopy
+	CMP  $8, R5
+	BLT  slowForwardCopy
+	CMP  $16, R14
+	BLT  slowForwardCopy
+	MOVD 0(R15), R2
+	MOVD R2, 0(R7)
+	MOVD 8(R15), R3
+	MOVD R3, 8(R7)
+	ADD  R4, R7, R7
+	B    loop
+
+slowForwardCopy:
+	// !!! If the forward copy is longer than 16 bytes, or if offset < 8, we
+	// can still try 8-byte load stores, provided we can overrun up to 10 extra
+	// bytes. As above, the overrun will be fixed up by subsequent iterations
+	// of the outermost loop.
+	//
+	// The C++ snappy code calls this technique IncrementalCopyFastPath. Its
+	// commentary says:
+	//
+	// ----
+	//
+	// The main part of this loop is a simple copy of eight bytes at a time
+	// until we've copied (at least) the requested amount of bytes.  However,
+	// if d and d-offset are less than eight bytes apart (indicating a
+	// repeating pattern of length < 8), we first need to expand the pattern in
+	// order to get the correct results. For instance, if the buffer looks like
+	// this, with the eight-byte <d-offset> and <d> patterns marked as
+	// intervals:
+	//
+	//    abxxxxxxxxxxxx
+	//    [------]           d-offset
+	//      [------]         d
+	//
+	// a single eight-byte copy from <d-offset> to <d> will repeat the pattern
+	// once, after which we can move <d> two bytes without moving <d-offset>:
+	//
+	//    ababxxxxxxxxxx
+	//    [------]           d-offset
+	//        [------]       d
+	//
+	// and repeat the exercise until the two no longer overlap.
+	//
+	// This allows us to do very well in the special case of one single byte
+	// repeated many times, without taking a big hit for more general cases.
+	//
+	// The worst case of extra writing past the end of the match occurs when
+	// offset == 1 and length == 1; the last copy will read from byte positions
+	// [0..7] and write to [4..11], whereas it was only supposed to write to
+	// position 1. Thus, ten excess bytes.
+	//
+	// ----
+	//
+	// That "10 byte overrun" worst case is confirmed by Go's
+	// TestSlowForwardCopyOverrun, which also tests the fixUpSlowForwardCopy
+	// and finishSlowForwardCopy algorithm.
+	//
+	// if length > len(dst)-d-10 {
+	//   goto verySlowForwardCopy
+	// }
+	SUB $10, R14, R14
+	CMP R14, R4
+	BGT verySlowForwardCopy
+
+makeOffsetAtLeast8:
+	// !!! As above, expand the pattern so that offset >= 8 and we can use
+	// 8-byte load/stores.
+	//
+	// for offset < 8 {
+	//   copy 8 bytes from dst[d-offset:] to dst[d:]
+	//   length -= offset
+	//   d      += offset
+	//   offset += offset
+	//   // The two previous lines together means that d-offset, and therefore
+	//   // R15, is unchanged.
+	// }
+	CMP  $8, R5
+	BGE  fixUpSlowForwardCopy
+	MOVD (R15), R3
+	MOVD R3, (R7)
+	SUB  R5, R4, R4
+	ADD  R5, R7, R7
+	ADD  R5, R5, R5
+	B    makeOffsetAtLeast8
+
+fixUpSlowForwardCopy:
+	// !!! Add length (which might be negative now) to d (implied by R7 being
+	// &dst[d]) so that d ends up at the right place when we jump back to the
+	// top of the loop. Before we do that, though, we save R7 to R2 so that, if
+	// length is positive, copying the remaining length bytes will write to the
+	// right place.
+	MOVD R7, R2
+	ADD  R4, R7, R7
+
+finishSlowForwardCopy:
+	// !!! Repeat 8-byte load/stores until length <= 0. Ending with a negative
+	// length means that we overrun, but as above, that will be fixed up by
+	// subsequent iterations of the outermost loop.
+	MOVD $0, R1
+	CMP  R1, R4
+	BLE  loop
+	MOVD (R15), R3
+	MOVD R3, (R2)
+	ADD  $8, R15, R15
+	ADD  $8, R2, R2
+	SUB  $8, R4, R4
+	B    finishSlowForwardCopy
+
+verySlowForwardCopy:
+	// verySlowForwardCopy is a simple implementation of forward copy. In C
+	// parlance, this is a do/while loop instead of a while loop, since we know
+	// that length > 0. In Go syntax:
+	//
+	// for {
+	//   dst[d] = dst[d - offset]
+	//   d++
+	//   length--
+	//   if length == 0 {
+	//     break
+	//   }
+	// }
+	MOVB (R15), R3
+	MOVB R3, (R7)
+	ADD  $1, R15, R15
+	ADD  $1, R7, R7
+	SUB  $1, R4, R4
+	CBNZ R4, verySlowForwardCopy
+	B    loop
+
+	// The code above handles copy tags.
+	// ----------------------------------------
+
+end:
+	// This is the end of the "for s < len(src)".
+	//
+	// if d != len(dst) { etc }
+	CMP R10, R7
+	BNE errCorrupt
+
+	// return 0
+	MOVD $0, ret+48(FP)
+	RET
+
+errCorrupt:
+	// return decodeErrCodeCorrupt
+	MOVD $1, R2
+	MOVD R2, ret+48(FP)
+	RET

vendor/github.com/golang/snappy/decode_asm.go

@@ -0,0 +1,15 @@
+// Copyright 2016 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+// +build amd64 arm64
+
+package snappy
+
+// decode has the same semantics as in decode_other.go.
+//
+//go:noescape
+func decode(dst, src []byte) int

vendor/github.com/golang/snappy/decode_other.go

@@ -0,0 +1,115 @@
+// Copyright 2016 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !amd64,!arm64 appengine !gc noasm
+
+package snappy
+
+// decode writes the decoding of src to dst. It assumes that the varint-encoded
+// length of the decompressed bytes has already been read, and that len(dst)
+// equals that length.
+//
+// It returns 0 on success or a decodeErrCodeXxx error code on failure.
+func decode(dst, src []byte) int {
+	var d, s, offset, length int
+	for s < len(src) {
+		switch src[s] & 0x03 {
+		case tagLiteral:
+			x := uint32(src[s] >> 2)
+			switch {
+			case x < 60:
+				s++
+			case x == 60:
+				s += 2
+				if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+					return decodeErrCodeCorrupt
+				}
+				x = uint32(src[s-1])
+			case x == 61:
+				s += 3
+				if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+					return decodeErrCodeCorrupt
+				}
+				x = uint32(src[s-2]) | uint32(src[s-1])<<8
+			case x == 62:
+				s += 4
+				if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+					return decodeErrCodeCorrupt
+				}
+				x = uint32(src[s-3]) | uint32(src[s-2])<<8 | uint32(src[s-1])<<16
+			case x == 63:
+				s += 5
+				if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+					return decodeErrCodeCorrupt
+				}
+				x = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24
+			}
+			length = int(x) + 1
+			if length <= 0 {
+				return decodeErrCodeUnsupportedLiteralLength
+			}
+			if length > len(dst)-d || length > len(src)-s {
+				return decodeErrCodeCorrupt
+			}
+			copy(dst[d:], src[s:s+length])
+			d += length
+			s += length
+			continue
+
+		case tagCopy1:
+			s += 2
+			if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+				return decodeErrCodeCorrupt
+			}
+			length = 4 + int(src[s-2])>>2&0x7
+			offset = int(uint32(src[s-2])&0xe0<<3 | uint32(src[s-1]))
+
+		case tagCopy2:
+			s += 3
+			if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+				return decodeErrCodeCorrupt
+			}
+			length = 1 + int(src[s-3])>>2
+			offset = int(uint32(src[s-2]) | uint32(src[s-1])<<8)
+
+		case tagCopy4:
+			s += 5
+			if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line.
+				return decodeErrCodeCorrupt
+			}
+			length = 1 + int(src[s-5])>>2
+			offset = int(uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24)
+		}
+
+		if offset <= 0 || d < offset || length > len(dst)-d {
+			return decodeErrCodeCorrupt
+		}
+		// Copy from an earlier sub-slice of dst to a later sub-slice.
+		// If no overlap, use the built-in copy:
+		if offset >= length {
+			copy(dst[d:d+length], dst[d-offset:])
+			d += length
+			continue
+		}
+
+		// Unlike the built-in copy function, this byte-by-byte copy always runs
+		// forwards, even if the slices overlap. Conceptually, this is:
+		//
+		// d += forwardCopy(dst[d:d+length], dst[d-offset:])
+		//
+		// We align the slices into a and b and show the compiler they are the same size.
+		// This allows the loop to run without bounds checks.
+		a := dst[d : d+length]
+		b := dst[d-offset:]
+		b = b[:len(a)]
+		for i := range a {
+			a[i] = b[i]
+		}
+		d += length
+	}
+	if d != len(dst) {
+		return decodeErrCodeCorrupt
+	}
+	return 0
+}

vendor/github.com/golang/snappy/encode.go

@@ -0,0 +1,289 @@
+// Copyright 2011 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package snappy
+
+import (
+	"encoding/binary"
+	"errors"
+	"io"
+)
+
+// Encode returns the encoded form of src. The returned slice may be a sub-
+// slice of dst if dst was large enough to hold the entire encoded block.
+// Otherwise, a newly allocated slice will be returned.
+//
+// The dst and src must not overlap. It is valid to pass a nil dst.
+//
+// Encode handles the Snappy block format, not the Snappy stream format.
+func Encode(dst, src []byte) []byte {
+	if n := MaxEncodedLen(len(src)); n < 0 {
+		panic(ErrTooLarge)
+	} else if len(dst) < n {
+		dst = make([]byte, n)
+	}
+
+	// The block starts with the varint-encoded length of the decompressed bytes.
+	d := binary.PutUvarint(dst, uint64(len(src)))
+
+	for len(src) > 0 {
+		p := src
+		src = nil
+		if len(p) > maxBlockSize {
+			p, src = p[:maxBlockSize], p[maxBlockSize:]
+		}
+		if len(p) < minNonLiteralBlockSize {
+			d += emitLiteral(dst[d:], p)
+		} else {
+			d += encodeBlock(dst[d:], p)
+		}
+	}
+	return dst[:d]
+}
+
+// inputMargin is the minimum number of extra input bytes to keep, inside
+// encodeBlock's inner loop. On some architectures, this margin lets us
+// implement a fast path for emitLiteral, where the copy of short (<= 16 byte)
+// literals can be implemented as a single load to and store from a 16-byte
+// register. That literal's actual length can be as short as 1 byte, so this
+// can copy up to 15 bytes too much, but that's OK as subsequent iterations of
+// the encoding loop will fix up the copy overrun, and this inputMargin ensures
+// that we don't overrun the dst and src buffers.
+const inputMargin = 16 - 1
+
+// minNonLiteralBlockSize is the minimum size of the input to encodeBlock that
+// could be encoded with a copy tag. This is the minimum with respect to the
+// algorithm used by encodeBlock, not a minimum enforced by the file format.
+//
+// The encoded output must start with at least a 1 byte literal, as there are
+// no previous bytes to copy. A minimal (1 byte) copy after that, generated
+// from an emitCopy call in encodeBlock's main loop, would require at least
+// another inputMargin bytes, for the reason above: we want any emitLiteral
+// calls inside encodeBlock's main loop to use the fast path if possible, which
+// requires being able to overrun by inputMargin bytes. Thus,
+// minNonLiteralBlockSize equals 1 + 1 + inputMargin.
+//
+// The C++ code doesn't use this exact threshold, but it could, as discussed at
+// https://groups.google.com/d/topic/snappy-compression/oGbhsdIJSJ8/discussion
+// The difference between Go (2+inputMargin) and C++ (inputMargin) is purely an
+// optimization. It should not affect the encoded form. This is tested by
+// TestSameEncodingAsCppShortCopies.
+const minNonLiteralBlockSize = 1 + 1 + inputMargin
+
+// MaxEncodedLen returns the maximum length of a snappy block, given its
+// uncompressed length.
+//
+// It will return a negative value if srcLen is too large to encode.
+func MaxEncodedLen(srcLen int) int {
+	n := uint64(srcLen)
+	if n > 0xffffffff {
+		return -1
+	}
+	// Compressed data can be defined as:
+	//    compressed := item* literal*
+	//    item       := literal* copy
+	//
+	// The trailing literal sequence has a space blowup of at most 62/60
+	// since a literal of length 60 needs one tag byte + one extra byte
+	// for length information.
+	//
+	// Item blowup is trickier to measure. Suppose the "copy" op copies
+	// 4 bytes of data. Because of a special check in the encoding code,
+	// we produce a 4-byte copy only if the offset is < 65536. Therefore
+	// the copy op takes 3 bytes to encode, and this type of item leads
+	// to at most the 62/60 blowup for representing literals.
+	//
+	// Suppose the "copy" op copies 5 bytes of data. If the offset is big
+	// enough, it will take 5 bytes to encode the copy op. Therefore the
+	// worst case here is a one-byte literal followed by a five-byte copy.
+	// That is, 6 bytes of input turn into 7 bytes of "compressed" data.
+	//
+	// This last factor dominates the blowup, so the final estimate is:
+	n = 32 + n + n/6
+	if n > 0xffffffff {
+		return -1
+	}
+	return int(n)
+}
+
+var errClosed = errors.New("snappy: Writer is closed")
+
+// NewWriter returns a new Writer that compresses to w.
+//
+// The Writer returned does not buffer writes. There is no need to Flush or
+// Close such a Writer.
+//
+// Deprecated: the Writer returned is not suitable for many small writes, only
+// for few large writes. Use NewBufferedWriter instead, which is efficient
+// regardless of the frequency and shape of the writes, and remember to Close
+// that Writer when done.
+func NewWriter(w io.Writer) *Writer {
+	return &Writer{
+		w:    w,
+		obuf: make([]byte, obufLen),
+	}
+}
+
+// NewBufferedWriter returns a new Writer that compresses to w, using the
+// framing format described at
+// https://github.com/google/snappy/blob/master/framing_format.txt
+//
+// The Writer returned buffers writes. Users must call Close to guarantee all
+// data has been forwarded to the underlying io.Writer. They may also call
+// Flush zero or more times before calling Close.
+func NewBufferedWriter(w io.Writer) *Writer {
+	return &Writer{
+		w:    w,
+		ibuf: make([]byte, 0, maxBlockSize),
+		obuf: make([]byte, obufLen),
+	}
+}
+
+// Writer is an io.Writer that can write Snappy-compressed bytes.
+//
+// Writer handles the Snappy stream format, not the Snappy block format.
+type Writer struct {
+	w   io.Writer
+	err error
+
+	// ibuf is a buffer for the incoming (uncompressed) bytes.
+	//
+	// Its use is optional. For backwards compatibility, Writers created by the
+	// NewWriter function have ibuf == nil, do not buffer incoming bytes, and
+	// therefore do not need to be Flush'ed or Close'd.
+	ibuf []byte
+
+	// obuf is a buffer for the outgoing (compressed) bytes.
+	obuf []byte
+
+	// wroteStreamHeader is whether we have written the stream header.
+	wroteStreamHeader bool
+}
+
+// Reset discards the writer's state and switches the Snappy writer to write to
+// w. This permits reusing a Writer rather than allocating a new one.
+func (w *Writer) Reset(writer io.Writer) {
+	w.w = writer
+	w.err = nil
+	if w.ibuf != nil {
+		w.ibuf = w.ibuf[:0]
+	}
+	w.wroteStreamHeader = false
+}
+
+// Write satisfies the io.Writer interface.
+func (w *Writer) Write(p []byte) (nRet int, errRet error) {
+	if w.ibuf == nil {
+		// Do not buffer incoming bytes. This does not perform or compress well
+		// if the caller of Writer.Write writes many small slices. This
+		// behavior is therefore deprecated, but still supported for backwards
+		// compatibility with code that doesn't explicitly Flush or Close.
+		return w.write(p)
+	}
+
+	// The remainder of this method is based on bufio.Writer.Write from the
+	// standard library.
+
+	for len(p) > (cap(w.ibuf)-len(w.ibuf)) && w.err == nil {
+		var n int
+		if len(w.ibuf) == 0 {
+			// Large write, empty buffer.
+			// Write directly from p to avoid copy.
+			n, _ = w.write(p)
+		} else {
+			n = copy(w.ibuf[len(w.ibuf):cap(w.ibuf)], p)
+			w.ibuf = w.ibuf[:len(w.ibuf)+n]
+			w.Flush()
+		}
+		nRet += n
+		p = p[n:]
+	}
+	if w.err != nil {
+		return nRet, w.err
+	}
+	n := copy(w.ibuf[len(w.ibuf):cap(w.ibuf)], p)
+	w.ibuf = w.ibuf[:len(w.ibuf)+n]
+	nRet += n
+	return nRet, nil
+}
+
+func (w *Writer) write(p []byte) (nRet int, errRet error) {
+	if w.err != nil {
+		return 0, w.err
+	}
+	for len(p) > 0 {
+		obufStart := len(magicChunk)
+		if !w.wroteStreamHeader {
+			w.wroteStreamHeader = true
+			copy(w.obuf, magicChunk)
+			obufStart = 0
+		}
+
+		var uncompressed []byte
+		if len(p) > maxBlockSize {
+			uncompressed, p = p[:maxBlockSize], p[maxBlockSize:]
+		} else {
+			uncompressed, p = p, nil
+		}
+		checksum := crc(uncompressed)
+
+		// Compress the buffer, discarding the result if the improvement
+		// isn't at least 12.5%.
+		compressed := Encode(w.obuf[obufHeaderLen:], uncompressed)
+		chunkType := uint8(chunkTypeCompressedData)
+		chunkLen := 4 + len(compressed)
+		obufEnd := obufHeaderLen + len(compressed)
+		if len(compressed) >= len(uncompressed)-len(uncompressed)/8 {
+			chunkType = chunkTypeUncompressedData
+			chunkLen = 4 + len(uncompressed)
+			obufEnd = obufHeaderLen
+		}
+
+		// Fill in the per-chunk header that comes before the body.
+		w.obuf[len(magicChunk)+0] = chunkType
+		w.obuf[len(magicChunk)+1] = uint8(chunkLen >> 0)
+		w.obuf[len(magicChunk)+2] = uint8(chunkLen >> 8)
+		w.obuf[len(magicChunk)+3] = uint8(chunkLen >> 16)
+		w.obuf[len(magicChunk)+4] = uint8(checksum >> 0)
+		w.obuf[len(magicChunk)+5] = uint8(checksum >> 8)
+		w.obuf[len(magicChunk)+6] = uint8(checksum >> 16)
+		w.obuf[len(magicChunk)+7] = uint8(checksum >> 24)
+
+		if _, err := w.w.Write(w.obuf[obufStart:obufEnd]); err != nil {
+			w.err = err
+			return nRet, err
+		}
+		if chunkType == chunkTypeUncompressedData {
+			if _, err := w.w.Write(uncompressed); err != nil {
+				w.err = err
+				return nRet, err
+			}
+		}
+		nRet += len(uncompressed)
+	}
+	return nRet, nil
+}
+
+// Flush flushes the Writer to its underlying io.Writer.
+func (w *Writer) Flush() error {
+	if w.err != nil {
+		return w.err
+	}
+	if len(w.ibuf) == 0 {
+		return nil
+	}
+	w.write(w.ibuf)
+	w.ibuf = w.ibuf[:0]
+	return w.err
+}
+
+// Close calls Flush and then closes the Writer.
+func (w *Writer) Close() error {
+	w.Flush()
+	ret := w.err
+	if w.err == nil {
+		w.err = errClosed
+	}
+	return ret
+}

vendor/github.com/golang/snappy/encode_amd64.s

@@ -0,0 +1,730 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+
+#include "textflag.h"
+
+// The XXX lines assemble on Go 1.4, 1.5 and 1.7, but not 1.6, due to a
+// Go toolchain regression. See https://github.com/golang/go/issues/15426 and
+// https://github.com/golang/snappy/issues/29
+//
+// As a workaround, the package was built with a known good assembler, and
+// those instructions were disassembled by "objdump -d" to yield the
+//	4e 0f b7 7c 5c 78       movzwq 0x78(%rsp,%r11,2),%r15
+// style comments, in AT&T asm syntax. Note that rsp here is a physical
+// register, not Go/asm's SP pseudo-register (see https://golang.org/doc/asm).
+// The instructions were then encoded as "BYTE $0x.." sequences, which assemble
+// fine on Go 1.6.
+
+// The asm code generally follows the pure Go code in encode_other.go, except
+// where marked with a "!!!".
+
+// ----------------------------------------------------------------------------
+
+// func emitLiteral(dst, lit []byte) int
+//
+// All local variables fit into registers. The register allocation:
+//	- AX	len(lit)
+//	- BX	n
+//	- DX	return value
+//	- DI	&dst[i]
+//	- R10	&lit[0]
+//
+// The 24 bytes of stack space is to call runtime·memmove.
+//
+// The unusual register allocation of local variables, such as R10 for the
+// source pointer, matches the allocation used at the call site in encodeBlock,
+// which makes it easier to manually inline this function.
+TEXT ·emitLiteral(SB), NOSPLIT, $24-56
+	MOVQ dst_base+0(FP), DI
+	MOVQ lit_base+24(FP), R10
+	MOVQ lit_len+32(FP), AX
+	MOVQ AX, DX
+	MOVL AX, BX
+	SUBL $1, BX
+
+	CMPL BX, $60
+	JLT  oneByte
+	CMPL BX, $256
+	JLT  twoBytes
+
+threeBytes:
+	MOVB $0xf4, 0(DI)
+	MOVW BX, 1(DI)
+	ADDQ $3, DI
+	ADDQ $3, DX
+	JMP  memmove
+
+twoBytes:
+	MOVB $0xf0, 0(DI)
+	MOVB BX, 1(DI)
+	ADDQ $2, DI
+	ADDQ $2, DX
+	JMP  memmove
+
+oneByte:
+	SHLB $2, BX
+	MOVB BX, 0(DI)
+	ADDQ $1, DI
+	ADDQ $1, DX
+
+memmove:
+	MOVQ DX, ret+48(FP)
+
+	// copy(dst[i:], lit)
+	//
+	// This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push
+	// DI, R10 and AX as arguments.
+	MOVQ DI, 0(SP)
+	MOVQ R10, 8(SP)
+	MOVQ AX, 16(SP)
+	CALL runtime·memmove(SB)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func emitCopy(dst []byte, offset, length int) int
+//
+// All local variables fit into registers. The register allocation:
+//	- AX	length
+//	- SI	&dst[0]
+//	- DI	&dst[i]
+//	- R11	offset
+//
+// The unusual register allocation of local variables, such as R11 for the
+// offset, matches the allocation used at the call site in encodeBlock, which
+// makes it easier to manually inline this function.
+TEXT ·emitCopy(SB), NOSPLIT, $0-48
+	MOVQ dst_base+0(FP), DI
+	MOVQ DI, SI
+	MOVQ offset+24(FP), R11
+	MOVQ length+32(FP), AX
+
+loop0:
+	// for length >= 68 { etc }
+	CMPL AX, $68
+	JLT  step1
+
+	// Emit a length 64 copy, encoded as 3 bytes.
+	MOVB $0xfe, 0(DI)
+	MOVW R11, 1(DI)
+	ADDQ $3, DI
+	SUBL $64, AX
+	JMP  loop0
+
+step1:
+	// if length > 64 { etc }
+	CMPL AX, $64
+	JLE  step2
+
+	// Emit a length 60 copy, encoded as 3 bytes.
+	MOVB $0xee, 0(DI)
+	MOVW R11, 1(DI)
+	ADDQ $3, DI
+	SUBL $60, AX
+
+step2:
+	// if length >= 12 || offset >= 2048 { goto step3 }
+	CMPL AX, $12
+	JGE  step3
+	CMPL R11, $2048
+	JGE  step3
+
+	// Emit the remaining copy, encoded as 2 bytes.
+	MOVB R11, 1(DI)
+	SHRL $8, R11
+	SHLB $5, R11
+	SUBB $4, AX
+	SHLB $2, AX
+	ORB  AX, R11
+	ORB  $1, R11
+	MOVB R11, 0(DI)
+	ADDQ $2, DI
+
+	// Return the number of bytes written.
+	SUBQ SI, DI
+	MOVQ DI, ret+40(FP)
+	RET
+
+step3:
+	// Emit the remaining copy, encoded as 3 bytes.
+	SUBL $1, AX
+	SHLB $2, AX
+	ORB  $2, AX
+	MOVB AX, 0(DI)
+	MOVW R11, 1(DI)
+	ADDQ $3, DI
+
+	// Return the number of bytes written.
+	SUBQ SI, DI
+	MOVQ DI, ret+40(FP)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func extendMatch(src []byte, i, j int) int
+//
+// All local variables fit into registers. The register allocation:
+//	- DX	&src[0]
+//	- SI	&src[j]
+//	- R13	&src[len(src) - 8]
+//	- R14	&src[len(src)]
+//	- R15	&src[i]
+//
+// The unusual register allocation of local variables, such as R15 for a source
+// pointer, matches the allocation used at the call site in encodeBlock, which
+// makes it easier to manually inline this function.
+TEXT ·extendMatch(SB), NOSPLIT, $0-48
+	MOVQ src_base+0(FP), DX
+	MOVQ src_len+8(FP), R14
+	MOVQ i+24(FP), R15
+	MOVQ j+32(FP), SI
+	ADDQ DX, R14
+	ADDQ DX, R15
+	ADDQ DX, SI
+	MOVQ R14, R13
+	SUBQ $8, R13
+
+cmp8:
+	// As long as we are 8 or more bytes before the end of src, we can load and
+	// compare 8 bytes at a time. If those 8 bytes are equal, repeat.
+	CMPQ SI, R13
+	JA   cmp1
+	MOVQ (R15), AX
+	MOVQ (SI), BX
+	CMPQ AX, BX
+	JNE  bsf
+	ADDQ $8, R15
+	ADDQ $8, SI
+	JMP  cmp8
+
+bsf:
+	// If those 8 bytes were not equal, XOR the two 8 byte values, and return
+	// the index of the first byte that differs. The BSF instruction finds the
+	// least significant 1 bit, the amd64 architecture is little-endian, and
+	// the shift by 3 converts a bit index to a byte index.
+	XORQ AX, BX
+	BSFQ BX, BX
+	SHRQ $3, BX
+	ADDQ BX, SI
+
+	// Convert from &src[ret] to ret.
+	SUBQ DX, SI
+	MOVQ SI, ret+40(FP)
+	RET
+
+cmp1:
+	// In src's tail, compare 1 byte at a time.
+	CMPQ SI, R14
+	JAE  extendMatchEnd
+	MOVB (R15), AX
+	MOVB (SI), BX
+	CMPB AX, BX
+	JNE  extendMatchEnd
+	ADDQ $1, R15
+	ADDQ $1, SI
+	JMP  cmp1
+
+extendMatchEnd:
+	// Convert from &src[ret] to ret.
+	SUBQ DX, SI
+	MOVQ SI, ret+40(FP)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func encodeBlock(dst, src []byte) (d int)
+//
+// All local variables fit into registers, other than "var table". The register
+// allocation:
+//	- AX	.	.
+//	- BX	.	.
+//	- CX	56	shift (note that amd64 shifts by non-immediates must use CX).
+//	- DX	64	&src[0], tableSize
+//	- SI	72	&src[s]
+//	- DI	80	&dst[d]
+//	- R9	88	sLimit
+//	- R10	.	&src[nextEmit]
+//	- R11	96	prevHash, currHash, nextHash, offset
+//	- R12	104	&src[base], skip
+//	- R13	.	&src[nextS], &src[len(src) - 8]
+//	- R14	.	len(src), bytesBetweenHashLookups, &src[len(src)], x
+//	- R15	112	candidate
+//
+// The second column (56, 64, etc) is the stack offset to spill the registers
+// when calling other functions. We could pack this slightly tighter, but it's
+// simpler to have a dedicated spill map independent of the function called.
+//
+// "var table [maxTableSize]uint16" takes up 32768 bytes of stack space. An
+// extra 56 bytes, to call other functions, and an extra 64 bytes, to spill
+// local variables (registers) during calls gives 32768 + 56 + 64 = 32888.
+TEXT ·encodeBlock(SB), 0, $32888-56
+	MOVQ dst_base+0(FP), DI
+	MOVQ src_base+24(FP), SI
+	MOVQ src_len+32(FP), R14
+
+	// shift, tableSize := uint32(32-8), 1<<8
+	MOVQ $24, CX
+	MOVQ $256, DX
+
+calcShift:
+	// for ; tableSize < maxTableSize && tableSize < len(src); tableSize *= 2 {
+	//	shift--
+	// }
+	CMPQ DX, $16384
+	JGE  varTable
+	CMPQ DX, R14
+	JGE  varTable
+	SUBQ $1, CX
+	SHLQ $1, DX
+	JMP  calcShift
+
+varTable:
+	// var table [maxTableSize]uint16
+	//
+	// In the asm code, unlike the Go code, we can zero-initialize only the
+	// first tableSize elements. Each uint16 element is 2 bytes and each MOVOU
+	// writes 16 bytes, so we can do only tableSize/8 writes instead of the
+	// 2048 writes that would zero-initialize all of table's 32768 bytes.
+	SHRQ $3, DX
+	LEAQ table-32768(SP), BX
+	PXOR X0, X0
+
+memclr:
+	MOVOU X0, 0(BX)
+	ADDQ  $16, BX
+	SUBQ  $1, DX
+	JNZ   memclr
+
+	// !!! DX = &src[0]
+	MOVQ SI, DX
+
+	// sLimit := len(src) - inputMargin
+	MOVQ R14, R9
+	SUBQ $15, R9
+
+	// !!! Pre-emptively spill CX, DX and R9 to the stack. Their values don't
+	// change for the rest of the function.
+	MOVQ CX, 56(SP)
+	MOVQ DX, 64(SP)
+	MOVQ R9, 88(SP)
+
+	// nextEmit := 0
+	MOVQ DX, R10
+
+	// s := 1
+	ADDQ $1, SI
+
+	// nextHash := hash(load32(src, s), shift)
+	MOVL  0(SI), R11
+	IMULL $0x1e35a7bd, R11
+	SHRL  CX, R11
+
+outer:
+	// for { etc }
+
+	// skip := 32
+	MOVQ $32, R12
+
+	// nextS := s
+	MOVQ SI, R13
+
+	// candidate := 0
+	MOVQ $0, R15
+
+inner0:
+	// for { etc }
+
+	// s := nextS
+	MOVQ R13, SI
+
+	// bytesBetweenHashLookups := skip >> 5
+	MOVQ R12, R14
+	SHRQ $5, R14
+
+	// nextS = s + bytesBetweenHashLookups
+	ADDQ R14, R13
+
+	// skip += bytesBetweenHashLookups
+	ADDQ R14, R12
+
+	// if nextS > sLimit { goto emitRemainder }
+	MOVQ R13, AX
+	SUBQ DX, AX
+	CMPQ AX, R9
+	JA   emitRemainder
+
+	// candidate = int(table[nextHash])
+	// XXX: MOVWQZX table-32768(SP)(R11*2), R15
+	// XXX: 4e 0f b7 7c 5c 78       movzwq 0x78(%rsp,%r11,2),%r15
+	BYTE $0x4e
+	BYTE $0x0f
+	BYTE $0xb7
+	BYTE $0x7c
+	BYTE $0x5c
+	BYTE $0x78
+
+	// table[nextHash] = uint16(s)
+	MOVQ SI, AX
+	SUBQ DX, AX
+
+	// XXX: MOVW AX, table-32768(SP)(R11*2)
+	// XXX: 66 42 89 44 5c 78       mov    %ax,0x78(%rsp,%r11,2)
+	BYTE $0x66
+	BYTE $0x42
+	BYTE $0x89
+	BYTE $0x44
+	BYTE $0x5c
+	BYTE $0x78
+
+	// nextHash = hash(load32(src, nextS), shift)
+	MOVL  0(R13), R11
+	IMULL $0x1e35a7bd, R11
+	SHRL  CX, R11
+
+	// if load32(src, s) != load32(src, candidate) { continue } break
+	MOVL 0(SI), AX
+	MOVL (DX)(R15*1), BX
+	CMPL AX, BX
+	JNE  inner0
+
+fourByteMatch:
+	// As per the encode_other.go code:
+	//
+	// A 4-byte match has been found. We'll later see etc.
+
+	// !!! Jump to a fast path for short (<= 16 byte) literals. See the comment
+	// on inputMargin in encode.go.
+	MOVQ SI, AX
+	SUBQ R10, AX
+	CMPQ AX, $16
+	JLE  emitLiteralFastPath
+
+	// ----------------------------------------
+	// Begin inline of the emitLiteral call.
+	//
+	// d += emitLiteral(dst[d:], src[nextEmit:s])
+
+	MOVL AX, BX
+	SUBL $1, BX
+
+	CMPL BX, $60
+	JLT  inlineEmitLiteralOneByte
+	CMPL BX, $256
+	JLT  inlineEmitLiteralTwoBytes
+
+inlineEmitLiteralThreeBytes:
+	MOVB $0xf4, 0(DI)
+	MOVW BX, 1(DI)
+	ADDQ $3, DI
+	JMP  inlineEmitLiteralMemmove
+
+inlineEmitLiteralTwoBytes:
+	MOVB $0xf0, 0(DI)
+	MOVB BX, 1(DI)
+	ADDQ $2, DI
+	JMP  inlineEmitLiteralMemmove
+
+inlineEmitLiteralOneByte:
+	SHLB $2, BX
+	MOVB BX, 0(DI)
+	ADDQ $1, DI
+
+inlineEmitLiteralMemmove:
+	// Spill local variables (registers) onto the stack; call; unspill.
+	//
+	// copy(dst[i:], lit)
+	//
+	// This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push
+	// DI, R10 and AX as arguments.
+	MOVQ DI, 0(SP)
+	MOVQ R10, 8(SP)
+	MOVQ AX, 16(SP)
+	ADDQ AX, DI              // Finish the "d +=" part of "d += emitLiteral(etc)".
+	MOVQ SI, 72(SP)
+	MOVQ DI, 80(SP)
+	MOVQ R15, 112(SP)
+	CALL runtime·memmove(SB)
+	MOVQ 56(SP), CX
+	MOVQ 64(SP), DX
+	MOVQ 72(SP), SI
+	MOVQ 80(SP), DI
+	MOVQ 88(SP), R9
+	MOVQ 112(SP), R15
+	JMP  inner1
+
+inlineEmitLiteralEnd:
+	// End inline of the emitLiteral call.
+	// ----------------------------------------
+
+emitLiteralFastPath:
+	// !!! Emit the 1-byte encoding "uint8(len(lit)-1)<<2".
+	MOVB AX, BX
+	SUBB $1, BX
+	SHLB $2, BX
+	MOVB BX, (DI)
+	ADDQ $1, DI
+
+	// !!! Implement the copy from lit to dst as a 16-byte load and store.
+	// (Encode's documentation says that dst and src must not overlap.)
+	//
+	// This always copies 16 bytes, instead of only len(lit) bytes, but that's
+	// OK. Subsequent iterations will fix up the overrun.
+	//
+	// Note that on amd64, it is legal and cheap to issue unaligned 8-byte or
+	// 16-byte loads and stores. This technique probably wouldn't be as
+	// effective on architectures that are fussier about alignment.
+	MOVOU 0(R10), X0
+	MOVOU X0, 0(DI)
+	ADDQ  AX, DI
+
+inner1:
+	// for { etc }
+
+	// base := s
+	MOVQ SI, R12
+
+	// !!! offset := base - candidate
+	MOVQ R12, R11
+	SUBQ R15, R11
+	SUBQ DX, R11
+
+	// ----------------------------------------
+	// Begin inline of the extendMatch call.
+	//
+	// s = extendMatch(src, candidate+4, s+4)
+
+	// !!! R14 = &src[len(src)]
+	MOVQ src_len+32(FP), R14
+	ADDQ DX, R14
+
+	// !!! R13 = &src[len(src) - 8]
+	MOVQ R14, R13
+	SUBQ $8, R13
+
+	// !!! R15 = &src[candidate + 4]
+	ADDQ $4, R15
+	ADDQ DX, R15
+
+	// !!! s += 4
+	ADDQ $4, SI
+
+inlineExtendMatchCmp8:
+	// As long as we are 8 or more bytes before the end of src, we can load and
+	// compare 8 bytes at a time. If those 8 bytes are equal, repeat.
+	CMPQ SI, R13
+	JA   inlineExtendMatchCmp1
+	MOVQ (R15), AX
+	MOVQ (SI), BX
+	CMPQ AX, BX
+	JNE  inlineExtendMatchBSF
+	ADDQ $8, R15
+	ADDQ $8, SI
+	JMP  inlineExtendMatchCmp8
+
+inlineExtendMatchBSF:
+	// If those 8 bytes were not equal, XOR the two 8 byte values, and return
+	// the index of the first byte that differs. The BSF instruction finds the
+	// least significant 1 bit, the amd64 architecture is little-endian, and
+	// the shift by 3 converts a bit index to a byte index.
+	XORQ AX, BX
+	BSFQ BX, BX
+	SHRQ $3, BX
+	ADDQ BX, SI
+	JMP  inlineExtendMatchEnd
+
+inlineExtendMatchCmp1:
+	// In src's tail, compare 1 byte at a time.
+	CMPQ SI, R14
+	JAE  inlineExtendMatchEnd
+	MOVB (R15), AX
+	MOVB (SI), BX
+	CMPB AX, BX
+	JNE  inlineExtendMatchEnd
+	ADDQ $1, R15
+	ADDQ $1, SI
+	JMP  inlineExtendMatchCmp1
+
+inlineExtendMatchEnd:
+	// End inline of the extendMatch call.
+	// ----------------------------------------
+
+	// ----------------------------------------
+	// Begin inline of the emitCopy call.
+	//
+	// d += emitCopy(dst[d:], base-candidate, s-base)
+
+	// !!! length := s - base
+	MOVQ SI, AX
+	SUBQ R12, AX
+
+inlineEmitCopyLoop0:
+	// for length >= 68 { etc }
+	CMPL AX, $68
+	JLT  inlineEmitCopyStep1
+
+	// Emit a length 64 copy, encoded as 3 bytes.
+	MOVB $0xfe, 0(DI)
+	MOVW R11, 1(DI)
+	ADDQ $3, DI
+	SUBL $64, AX
+	JMP  inlineEmitCopyLoop0
+
+inlineEmitCopyStep1:
+	// if length > 64 { etc }
+	CMPL AX, $64
+	JLE  inlineEmitCopyStep2
+
+	// Emit a length 60 copy, encoded as 3 bytes.
+	MOVB $0xee, 0(DI)
+	MOVW R11, 1(DI)
+	ADDQ $3, DI
+	SUBL $60, AX
+
+inlineEmitCopyStep2:
+	// if length >= 12 || offset >= 2048 { goto inlineEmitCopyStep3 }
+	CMPL AX, $12
+	JGE  inlineEmitCopyStep3
+	CMPL R11, $2048
+	JGE  inlineEmitCopyStep3
+
+	// Emit the remaining copy, encoded as 2 bytes.
+	MOVB R11, 1(DI)
+	SHRL $8, R11
+	SHLB $5, R11
+	SUBB $4, AX
+	SHLB $2, AX
+	ORB  AX, R11
+	ORB  $1, R11
+	MOVB R11, 0(DI)
+	ADDQ $2, DI
+	JMP  inlineEmitCopyEnd
+
+inlineEmitCopyStep3:
+	// Emit the remaining copy, encoded as 3 bytes.
+	SUBL $1, AX
+	SHLB $2, AX
+	ORB  $2, AX
+	MOVB AX, 0(DI)
+	MOVW R11, 1(DI)
+	ADDQ $3, DI
+
+inlineEmitCopyEnd:
+	// End inline of the emitCopy call.
+	// ----------------------------------------
+
+	// nextEmit = s
+	MOVQ SI, R10
+
+	// if s >= sLimit { goto emitRemainder }
+	MOVQ SI, AX
+	SUBQ DX, AX
+	CMPQ AX, R9
+	JAE  emitRemainder
+
+	// As per the encode_other.go code:
+	//
+	// We could immediately etc.
+
+	// x := load64(src, s-1)
+	MOVQ -1(SI), R14
+
+	// prevHash := hash(uint32(x>>0), shift)
+	MOVL  R14, R11
+	IMULL $0x1e35a7bd, R11
+	SHRL  CX, R11
+
+	// table[prevHash] = uint16(s-1)
+	MOVQ SI, AX
+	SUBQ DX, AX
+	SUBQ $1, AX
+
+	// XXX: MOVW AX, table-32768(SP)(R11*2)
+	// XXX: 66 42 89 44 5c 78       mov    %ax,0x78(%rsp,%r11,2)
+	BYTE $0x66
+	BYTE $0x42
+	BYTE $0x89
+	BYTE $0x44
+	BYTE $0x5c
+	BYTE $0x78
+
+	// currHash := hash(uint32(x>>8), shift)
+	SHRQ  $8, R14
+	MOVL  R14, R11
+	IMULL $0x1e35a7bd, R11
+	SHRL  CX, R11
+
+	// candidate = int(table[currHash])
+	// XXX: MOVWQZX table-32768(SP)(R11*2), R15
+	// XXX: 4e 0f b7 7c 5c 78       movzwq 0x78(%rsp,%r11,2),%r15
+	BYTE $0x4e
+	BYTE $0x0f
+	BYTE $0xb7
+	BYTE $0x7c
+	BYTE $0x5c
+	BYTE $0x78
+
+	// table[currHash] = uint16(s)
+	ADDQ $1, AX
+
+	// XXX: MOVW AX, table-32768(SP)(R11*2)
+	// XXX: 66 42 89 44 5c 78       mov    %ax,0x78(%rsp,%r11,2)
+	BYTE $0x66
+	BYTE $0x42
+	BYTE $0x89
+	BYTE $0x44
+	BYTE $0x5c
+	BYTE $0x78
+
+	// if uint32(x>>8) == load32(src, candidate) { continue }
+	MOVL (DX)(R15*1), BX
+	CMPL R14, BX
+	JEQ  inner1
+
+	// nextHash = hash(uint32(x>>16), shift)
+	SHRQ  $8, R14
+	MOVL  R14, R11
+	IMULL $0x1e35a7bd, R11
+	SHRL  CX, R11
+
+	// s++
+	ADDQ $1, SI
+
+	// break out of the inner1 for loop, i.e. continue the outer loop.
+	JMP outer
+
+emitRemainder:
+	// if nextEmit < len(src) { etc }
+	MOVQ src_len+32(FP), AX
+	ADDQ DX, AX
+	CMPQ R10, AX
+	JEQ  encodeBlockEnd
+
+	// d += emitLiteral(dst[d:], src[nextEmit:])
+	//
+	// Push args.
+	MOVQ DI, 0(SP)
+	MOVQ $0, 8(SP)   // Unnecessary, as the callee ignores it, but conservative.
+	MOVQ $0, 16(SP)  // Unnecessary, as the callee ignores it, but conservative.
+	MOVQ R10, 24(SP)
+	SUBQ R10, AX
+	MOVQ AX, 32(SP)
+	MOVQ AX, 40(SP)  // Unnecessary, as the callee ignores it, but conservative.
+
+	// Spill local variables (registers) onto the stack; call; unspill.
+	MOVQ DI, 80(SP)
+	CALL ·emitLiteral(SB)
+	MOVQ 80(SP), DI
+
+	// Finish the "d +=" part of "d += emitLiteral(etc)".
+	ADDQ 48(SP), DI
+
+encodeBlockEnd:
+	MOVQ dst_base+0(FP), AX
+	SUBQ AX, DI
+	MOVQ DI, d+48(FP)
+	RET

vendor/github.com/golang/snappy/encode_arm64.s

@@ -0,0 +1,722 @@
+// Copyright 2020 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+
+#include "textflag.h"
+
+// The asm code generally follows the pure Go code in encode_other.go, except
+// where marked with a "!!!".
+
+// ----------------------------------------------------------------------------
+
+// func emitLiteral(dst, lit []byte) int
+//
+// All local variables fit into registers. The register allocation:
+//	- R3	len(lit)
+//	- R4	n
+//	- R6	return value
+//	- R8	&dst[i]
+//	- R10	&lit[0]
+//
+// The 32 bytes of stack space is to call runtime·memmove.
+//
+// The unusual register allocation of local variables, such as R10 for the
+// source pointer, matches the allocation used at the call site in encodeBlock,
+// which makes it easier to manually inline this function.
+TEXT ·emitLiteral(SB), NOSPLIT, $32-56
+	MOVD dst_base+0(FP), R8
+	MOVD lit_base+24(FP), R10
+	MOVD lit_len+32(FP), R3
+	MOVD R3, R6
+	MOVW R3, R4
+	SUBW $1, R4, R4
+
+	CMPW $60, R4
+	BLT  oneByte
+	CMPW $256, R4
+	BLT  twoBytes
+
+threeBytes:
+	MOVD $0xf4, R2
+	MOVB R2, 0(R8)
+	MOVW R4, 1(R8)
+	ADD  $3, R8, R8
+	ADD  $3, R6, R6
+	B    memmove
+
+twoBytes:
+	MOVD $0xf0, R2
+	MOVB R2, 0(R8)
+	MOVB R4, 1(R8)
+	ADD  $2, R8, R8
+	ADD  $2, R6, R6
+	B    memmove
+
+oneByte:
+	LSLW $2, R4, R4
+	MOVB R4, 0(R8)
+	ADD  $1, R8, R8
+	ADD  $1, R6, R6
+
+memmove:
+	MOVD R6, ret+48(FP)
+
+	// copy(dst[i:], lit)
+	//
+	// This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push
+	// R8, R10 and R3 as arguments.
+	MOVD R8, 8(RSP)
+	MOVD R10, 16(RSP)
+	MOVD R3, 24(RSP)
+	CALL runtime·memmove(SB)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func emitCopy(dst []byte, offset, length int) int
+//
+// All local variables fit into registers. The register allocation:
+//	- R3	length
+//	- R7	&dst[0]
+//	- R8	&dst[i]
+//	- R11	offset
+//
+// The unusual register allocation of local variables, such as R11 for the
+// offset, matches the allocation used at the call site in encodeBlock, which
+// makes it easier to manually inline this function.
+TEXT ·emitCopy(SB), NOSPLIT, $0-48
+	MOVD dst_base+0(FP), R8
+	MOVD R8, R7
+	MOVD offset+24(FP), R11
+	MOVD length+32(FP), R3
+
+loop0:
+	// for length >= 68 { etc }
+	CMPW $68, R3
+	BLT  step1
+
+	// Emit a length 64 copy, encoded as 3 bytes.
+	MOVD $0xfe, R2
+	MOVB R2, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUB  $64, R3, R3
+	B    loop0
+
+step1:
+	// if length > 64 { etc }
+	CMP $64, R3
+	BLE step2
+
+	// Emit a length 60 copy, encoded as 3 bytes.
+	MOVD $0xee, R2
+	MOVB R2, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUB  $60, R3, R3
+
+step2:
+	// if length >= 12 || offset >= 2048 { goto step3 }
+	CMP  $12, R3
+	BGE  step3
+	CMPW $2048, R11
+	BGE  step3
+
+	// Emit the remaining copy, encoded as 2 bytes.
+	MOVB R11, 1(R8)
+	LSRW $3, R11, R11
+	AND  $0xe0, R11, R11
+	SUB  $4, R3, R3
+	LSLW $2, R3
+	AND  $0xff, R3, R3
+	ORRW R3, R11, R11
+	ORRW $1, R11, R11
+	MOVB R11, 0(R8)
+	ADD  $2, R8, R8
+
+	// Return the number of bytes written.
+	SUB  R7, R8, R8
+	MOVD R8, ret+40(FP)
+	RET
+
+step3:
+	// Emit the remaining copy, encoded as 3 bytes.
+	SUB  $1, R3, R3
+	AND  $0xff, R3, R3
+	LSLW $2, R3, R3
+	ORRW $2, R3, R3
+	MOVB R3, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+
+	// Return the number of bytes written.
+	SUB  R7, R8, R8
+	MOVD R8, ret+40(FP)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func extendMatch(src []byte, i, j int) int
+//
+// All local variables fit into registers. The register allocation:
+//	- R6	&src[0]
+//	- R7	&src[j]
+//	- R13	&src[len(src) - 8]
+//	- R14	&src[len(src)]
+//	- R15	&src[i]
+//
+// The unusual register allocation of local variables, such as R15 for a source
+// pointer, matches the allocation used at the call site in encodeBlock, which
+// makes it easier to manually inline this function.
+TEXT ·extendMatch(SB), NOSPLIT, $0-48
+	MOVD src_base+0(FP), R6
+	MOVD src_len+8(FP), R14
+	MOVD i+24(FP), R15
+	MOVD j+32(FP), R7
+	ADD  R6, R14, R14
+	ADD  R6, R15, R15
+	ADD  R6, R7, R7
+	MOVD R14, R13
+	SUB  $8, R13, R13
+
+cmp8:
+	// As long as we are 8 or more bytes before the end of src, we can load and
+	// compare 8 bytes at a time. If those 8 bytes are equal, repeat.
+	CMP  R13, R7
+	BHI  cmp1
+	MOVD (R15), R3
+	MOVD (R7), R4
+	CMP  R4, R3
+	BNE  bsf
+	ADD  $8, R15, R15
+	ADD  $8, R7, R7
+	B    cmp8
+
+bsf:
+	// If those 8 bytes were not equal, XOR the two 8 byte values, and return
+	// the index of the first byte that differs.
+	// RBIT reverses the bit order, then CLZ counts the leading zeros, the
+	// combination of which finds the least significant bit which is set.
+	// The arm64 architecture is little-endian, and the shift by 3 converts
+	// a bit index to a byte index.
+	EOR  R3, R4, R4
+	RBIT R4, R4
+	CLZ  R4, R4
+	ADD  R4>>3, R7, R7
+
+	// Convert from &src[ret] to ret.
+	SUB  R6, R7, R7
+	MOVD R7, ret+40(FP)
+	RET
+
+cmp1:
+	// In src's tail, compare 1 byte at a time.
+	CMP  R7, R14
+	BLS  extendMatchEnd
+	MOVB (R15), R3
+	MOVB (R7), R4
+	CMP  R4, R3
+	BNE  extendMatchEnd
+	ADD  $1, R15, R15
+	ADD  $1, R7, R7
+	B    cmp1
+
+extendMatchEnd:
+	// Convert from &src[ret] to ret.
+	SUB  R6, R7, R7
+	MOVD R7, ret+40(FP)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func encodeBlock(dst, src []byte) (d int)
+//
+// All local variables fit into registers, other than "var table". The register
+// allocation:
+//	- R3	.	.
+//	- R4	.	.
+//	- R5	64	shift
+//	- R6	72	&src[0], tableSize
+//	- R7	80	&src[s]
+//	- R8	88	&dst[d]
+//	- R9	96	sLimit
+//	- R10	.	&src[nextEmit]
+//	- R11	104	prevHash, currHash, nextHash, offset
+//	- R12	112	&src[base], skip
+//	- R13	.	&src[nextS], &src[len(src) - 8]
+//	- R14	.	len(src), bytesBetweenHashLookups, &src[len(src)], x
+//	- R15	120	candidate
+//	- R16	.	hash constant, 0x1e35a7bd
+//	- R17	.	&table
+//	- .  	128	table
+//
+// The second column (64, 72, etc) is the stack offset to spill the registers
+// when calling other functions. We could pack this slightly tighter, but it's
+// simpler to have a dedicated spill map independent of the function called.
+//
+// "var table [maxTableSize]uint16" takes up 32768 bytes of stack space. An
+// extra 64 bytes, to call other functions, and an extra 64 bytes, to spill
+// local variables (registers) during calls gives 32768 + 64 + 64 = 32896.
+TEXT ·encodeBlock(SB), 0, $32896-56
+	MOVD dst_base+0(FP), R8
+	MOVD src_base+24(FP), R7
+	MOVD src_len+32(FP), R14
+
+	// shift, tableSize := uint32(32-8), 1<<8
+	MOVD  $24, R5
+	MOVD  $256, R6
+	MOVW  $0xa7bd, R16
+	MOVKW $(0x1e35<<16), R16
+
+calcShift:
+	// for ; tableSize < maxTableSize && tableSize < len(src); tableSize *= 2 {
+	//	shift--
+	// }
+	MOVD $16384, R2
+	CMP  R2, R6
+	BGE  varTable
+	CMP  R14, R6
+	BGE  varTable
+	SUB  $1, R5, R5
+	LSL  $1, R6, R6
+	B    calcShift
+
+varTable:
+	// var table [maxTableSize]uint16
+	//
+	// In the asm code, unlike the Go code, we can zero-initialize only the
+	// first tableSize elements. Each uint16 element is 2 bytes and each
+	// iterations writes 64 bytes, so we can do only tableSize/32 writes
+	// instead of the 2048 writes that would zero-initialize all of table's
+	// 32768 bytes. This clear could overrun the first tableSize elements, but
+	// it won't overrun the allocated stack size.
+	ADD  $128, RSP, R17
+	MOVD R17, R4
+
+	// !!! R6 = &src[tableSize]
+	ADD R6<<1, R17, R6
+
+memclr:
+	STP.P (ZR, ZR), 64(R4)
+	STP   (ZR, ZR), -48(R4)
+	STP   (ZR, ZR), -32(R4)
+	STP   (ZR, ZR), -16(R4)
+	CMP   R4, R6
+	BHI   memclr
+
+	// !!! R6 = &src[0]
+	MOVD R7, R6
+
+	// sLimit := len(src) - inputMargin
+	MOVD R14, R9
+	SUB  $15, R9, R9
+
+	// !!! Pre-emptively spill R5, R6 and R9 to the stack. Their values don't
+	// change for the rest of the function.
+	MOVD R5, 64(RSP)
+	MOVD R6, 72(RSP)
+	MOVD R9, 96(RSP)
+
+	// nextEmit := 0
+	MOVD R6, R10
+
+	// s := 1
+	ADD $1, R7, R7
+
+	// nextHash := hash(load32(src, s), shift)
+	MOVW 0(R7), R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+outer:
+	// for { etc }
+
+	// skip := 32
+	MOVD $32, R12
+
+	// nextS := s
+	MOVD R7, R13
+
+	// candidate := 0
+	MOVD $0, R15
+
+inner0:
+	// for { etc }
+
+	// s := nextS
+	MOVD R13, R7
+
+	// bytesBetweenHashLookups := skip >> 5
+	MOVD R12, R14
+	LSR  $5, R14, R14
+
+	// nextS = s + bytesBetweenHashLookups
+	ADD R14, R13, R13
+
+	// skip += bytesBetweenHashLookups
+	ADD R14, R12, R12
+
+	// if nextS > sLimit { goto emitRemainder }
+	MOVD R13, R3
+	SUB  R6, R3, R3
+	CMP  R9, R3
+	BHI  emitRemainder
+
+	// candidate = int(table[nextHash])
+	MOVHU 0(R17)(R11<<1), R15
+
+	// table[nextHash] = uint16(s)
+	MOVD R7, R3
+	SUB  R6, R3, R3
+
+	MOVH R3, 0(R17)(R11<<1)
+
+	// nextHash = hash(load32(src, nextS), shift)
+	MOVW 0(R13), R11
+	MULW R16, R11
+	LSRW R5, R11, R11
+
+	// if load32(src, s) != load32(src, candidate) { continue } break
+	MOVW 0(R7), R3
+	MOVW (R6)(R15), R4
+	CMPW R4, R3
+	BNE  inner0
+
+fourByteMatch:
+	// As per the encode_other.go code:
+	//
+	// A 4-byte match has been found. We'll later see etc.
+
+	// !!! Jump to a fast path for short (<= 16 byte) literals. See the comment
+	// on inputMargin in encode.go.
+	MOVD R7, R3
+	SUB  R10, R3, R3
+	CMP  $16, R3
+	BLE  emitLiteralFastPath
+
+	// ----------------------------------------
+	// Begin inline of the emitLiteral call.
+	//
+	// d += emitLiteral(dst[d:], src[nextEmit:s])
+
+	MOVW R3, R4
+	SUBW $1, R4, R4
+
+	MOVW $60, R2
+	CMPW R2, R4
+	BLT  inlineEmitLiteralOneByte
+	MOVW $256, R2
+	CMPW R2, R4
+	BLT  inlineEmitLiteralTwoBytes
+
+inlineEmitLiteralThreeBytes:
+	MOVD $0xf4, R1
+	MOVB R1, 0(R8)
+	MOVW R4, 1(R8)
+	ADD  $3, R8, R8
+	B    inlineEmitLiteralMemmove
+
+inlineEmitLiteralTwoBytes:
+	MOVD $0xf0, R1
+	MOVB R1, 0(R8)
+	MOVB R4, 1(R8)
+	ADD  $2, R8, R8
+	B    inlineEmitLiteralMemmove
+
+inlineEmitLiteralOneByte:
+	LSLW $2, R4, R4
+	MOVB R4, 0(R8)
+	ADD  $1, R8, R8
+
+inlineEmitLiteralMemmove:
+	// Spill local variables (registers) onto the stack; call; unspill.
+	//
+	// copy(dst[i:], lit)
+	//
+	// This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push
+	// R8, R10 and R3 as arguments.
+	MOVD R8, 8(RSP)
+	MOVD R10, 16(RSP)
+	MOVD R3, 24(RSP)
+
+	// Finish the "d +=" part of "d += emitLiteral(etc)".
+	ADD   R3, R8, R8
+	MOVD  R7, 80(RSP)
+	MOVD  R8, 88(RSP)
+	MOVD  R15, 120(RSP)
+	CALL  runtime·memmove(SB)
+	MOVD  64(RSP), R5
+	MOVD  72(RSP), R6
+	MOVD  80(RSP), R7
+	MOVD  88(RSP), R8
+	MOVD  96(RSP), R9
+	MOVD  120(RSP), R15
+	ADD   $128, RSP, R17
+	MOVW  $0xa7bd, R16
+	MOVKW $(0x1e35<<16), R16
+	B     inner1
+
+inlineEmitLiteralEnd:
+	// End inline of the emitLiteral call.
+	// ----------------------------------------
+
+emitLiteralFastPath:
+	// !!! Emit the 1-byte encoding "uint8(len(lit)-1)<<2".
+	MOVB R3, R4
+	SUBW $1, R4, R4
+	AND  $0xff, R4, R4
+	LSLW $2, R4, R4
+	MOVB R4, (R8)
+	ADD  $1, R8, R8
+
+	// !!! Implement the copy from lit to dst as a 16-byte load and store.
+	// (Encode's documentation says that dst and src must not overlap.)
+	//
+	// This always copies 16 bytes, instead of only len(lit) bytes, but that's
+	// OK. Subsequent iterations will fix up the overrun.
+	//
+	// Note that on arm64, it is legal and cheap to issue unaligned 8-byte or
+	// 16-byte loads and stores. This technique probably wouldn't be as
+	// effective on architectures that are fussier about alignment.
+	LDP 0(R10), (R0, R1)
+	STP (R0, R1), 0(R8)
+	ADD R3, R8, R8
+
+inner1:
+	// for { etc }
+
+	// base := s
+	MOVD R7, R12
+
+	// !!! offset := base - candidate
+	MOVD R12, R11
+	SUB  R15, R11, R11
+	SUB  R6, R11, R11
+
+	// ----------------------------------------
+	// Begin inline of the extendMatch call.
+	//
+	// s = extendMatch(src, candidate+4, s+4)
+
+	// !!! R14 = &src[len(src)]
+	MOVD src_len+32(FP), R14
+	ADD  R6, R14, R14
+
+	// !!! R13 = &src[len(src) - 8]
+	MOVD R14, R13
+	SUB  $8, R13, R13
+
+	// !!! R15 = &src[candidate + 4]
+	ADD $4, R15, R15
+	ADD R6, R15, R15
+
+	// !!! s += 4
+	ADD $4, R7, R7
+
+inlineExtendMatchCmp8:
+	// As long as we are 8 or more bytes before the end of src, we can load and
+	// compare 8 bytes at a time. If those 8 bytes are equal, repeat.
+	CMP  R13, R7
+	BHI  inlineExtendMatchCmp1
+	MOVD (R15), R3
+	MOVD (R7), R4
+	CMP  R4, R3
+	BNE  inlineExtendMatchBSF
+	ADD  $8, R15, R15
+	ADD  $8, R7, R7
+	B    inlineExtendMatchCmp8
+
+inlineExtendMatchBSF:
+	// If those 8 bytes were not equal, XOR the two 8 byte values, and return
+	// the index of the first byte that differs.
+	// RBIT reverses the bit order, then CLZ counts the leading zeros, the
+	// combination of which finds the least significant bit which is set.
+	// The arm64 architecture is little-endian, and the shift by 3 converts
+	// a bit index to a byte index.
+	EOR  R3, R4, R4
+	RBIT R4, R4
+	CLZ  R4, R4
+	ADD  R4>>3, R7, R7
+	B    inlineExtendMatchEnd
+
+inlineExtendMatchCmp1:
+	// In src's tail, compare 1 byte at a time.
+	CMP  R7, R14
+	BLS  inlineExtendMatchEnd
+	MOVB (R15), R3
+	MOVB (R7), R4
+	CMP  R4, R3
+	BNE  inlineExtendMatchEnd
+	ADD  $1, R15, R15
+	ADD  $1, R7, R7
+	B    inlineExtendMatchCmp1
+
+inlineExtendMatchEnd:
+	// End inline of the extendMatch call.
+	// ----------------------------------------
+
+	// ----------------------------------------
+	// Begin inline of the emitCopy call.
+	//
+	// d += emitCopy(dst[d:], base-candidate, s-base)
+
+	// !!! length := s - base
+	MOVD R7, R3
+	SUB  R12, R3, R3
+
+inlineEmitCopyLoop0:
+	// for length >= 68 { etc }
+	MOVW $68, R2
+	CMPW R2, R3
+	BLT  inlineEmitCopyStep1
+
+	// Emit a length 64 copy, encoded as 3 bytes.
+	MOVD $0xfe, R1
+	MOVB R1, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUBW $64, R3, R3
+	B    inlineEmitCopyLoop0
+
+inlineEmitCopyStep1:
+	// if length > 64 { etc }
+	MOVW $64, R2
+	CMPW R2, R3
+	BLE  inlineEmitCopyStep2
+
+	// Emit a length 60 copy, encoded as 3 bytes.
+	MOVD $0xee, R1
+	MOVB R1, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUBW $60, R3, R3
+
+inlineEmitCopyStep2:
+	// if length >= 12 || offset >= 2048 { goto inlineEmitCopyStep3 }
+	MOVW $12, R2
+	CMPW R2, R3
+	BGE  inlineEmitCopyStep3
+	MOVW $2048, R2
+	CMPW R2, R11
+	BGE  inlineEmitCopyStep3
+
+	// Emit the remaining copy, encoded as 2 bytes.
+	MOVB R11, 1(R8)
+	LSRW $8, R11, R11
+	LSLW $5, R11, R11
+	SUBW $4, R3, R3
+	AND  $0xff, R3, R3
+	LSLW $2, R3, R3
+	ORRW R3, R11, R11
+	ORRW $1, R11, R11
+	MOVB R11, 0(R8)
+	ADD  $2, R8, R8
+	B    inlineEmitCopyEnd
+
+inlineEmitCopyStep3:
+	// Emit the remaining copy, encoded as 3 bytes.
+	SUBW $1, R3, R3
+	LSLW $2, R3, R3
+	ORRW $2, R3, R3
+	MOVB R3, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+
+inlineEmitCopyEnd:
+	// End inline of the emitCopy call.
+	// ----------------------------------------
+
+	// nextEmit = s
+	MOVD R7, R10
+
+	// if s >= sLimit { goto emitRemainder }
+	MOVD R7, R3
+	SUB  R6, R3, R3
+	CMP  R3, R9
+	BLS  emitRemainder
+
+	// As per the encode_other.go code:
+	//
+	// We could immediately etc.
+
+	// x := load64(src, s-1)
+	MOVD -1(R7), R14
+
+	// prevHash := hash(uint32(x>>0), shift)
+	MOVW R14, R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+	// table[prevHash] = uint16(s-1)
+	MOVD R7, R3
+	SUB  R6, R3, R3
+	SUB  $1, R3, R3
+
+	MOVHU R3, 0(R17)(R11<<1)
+
+	// currHash := hash(uint32(x>>8), shift)
+	LSR  $8, R14, R14
+	MOVW R14, R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+	// candidate = int(table[currHash])
+	MOVHU 0(R17)(R11<<1), R15
+
+	// table[currHash] = uint16(s)
+	ADD   $1, R3, R3
+	MOVHU R3, 0(R17)(R11<<1)
+
+	// if uint32(x>>8) == load32(src, candidate) { continue }
+	MOVW (R6)(R15), R4
+	CMPW R4, R14
+	BEQ  inner1
+
+	// nextHash = hash(uint32(x>>16), shift)
+	LSR  $8, R14, R14
+	MOVW R14, R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+	// s++
+	ADD $1, R7, R7
+
+	// break out of the inner1 for loop, i.e. continue the outer loop.
+	B outer
+
+emitRemainder:
+	// if nextEmit < len(src) { etc }
+	MOVD src_len+32(FP), R3
+	ADD  R6, R3, R3
+	CMP  R3, R10
+	BEQ  encodeBlockEnd
+
+	// d += emitLiteral(dst[d:], src[nextEmit:])
+	//
+	// Push args.
+	MOVD R8, 8(RSP)
+	MOVD $0, 16(RSP)  // Unnecessary, as the callee ignores it, but conservative.
+	MOVD $0, 24(RSP)  // Unnecessary, as the callee ignores it, but conservative.
+	MOVD R10, 32(RSP)
+	SUB  R10, R3, R3
+	MOVD R3, 40(RSP)
+	MOVD R3, 48(RSP)  // Unnecessary, as the callee ignores it, but conservative.
+
+	// Spill local variables (registers) onto the stack; call; unspill.
+	MOVD R8, 88(RSP)
+	CALL ·emitLiteral(SB)
+	MOVD 88(RSP), R8
+
+	// Finish the "d +=" part of "d += emitLiteral(etc)".
+	MOVD 56(RSP), R1
+	ADD  R1, R8, R8
+
+encodeBlockEnd:
+	MOVD dst_base+0(FP), R3
+	SUB  R3, R8, R8
+	MOVD R8, d+48(FP)
+	RET

vendor/github.com/golang/snappy/encode_asm.go

@@ -0,0 +1,30 @@
+// Copyright 2016 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+// +build amd64 arm64
+
+package snappy
+
+// emitLiteral has the same semantics as in encode_other.go.
+//
+//go:noescape
+func emitLiteral(dst, lit []byte) int
+
+// emitCopy has the same semantics as in encode_other.go.
+//
+//go:noescape
+func emitCopy(dst []byte, offset, length int) int
+
+// extendMatch has the same semantics as in encode_other.go.
+//
+//go:noescape
+func extendMatch(src []byte, i, j int) int
+
+// encodeBlock has the same semantics as in encode_other.go.
+//
+//go:noescape
+func encodeBlock(dst, src []byte) (d int)

vendor/github.com/golang/snappy/encode_other.go

@@ -0,0 +1,238 @@
+// Copyright 2016 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !amd64,!arm64 appengine !gc noasm
+
+package snappy
+
+func load32(b []byte, i int) uint32 {
+	b = b[i : i+4 : len(b)] // Help the compiler eliminate bounds checks on the next line.
+	return uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 | uint32(b[3])<<24
+}
+
+func load64(b []byte, i int) uint64 {
+	b = b[i : i+8 : len(b)] // Help the compiler eliminate bounds checks on the next line.
+	return uint64(b[0]) | uint64(b[1])<<8 | uint64(b[2])<<16 | uint64(b[3])<<24 |
+		uint64(b[4])<<32 | uint64(b[5])<<40 | uint64(b[6])<<48 | uint64(b[7])<<56
+}
+
+// emitLiteral writes a literal chunk and returns the number of bytes written.
+//
+// It assumes that:
+//	dst is long enough to hold the encoded bytes
+//	1 <= len(lit) && len(lit) <= 65536
+func emitLiteral(dst, lit []byte) int {
+	i, n := 0, uint(len(lit)-1)
+	switch {
+	case n < 60:
+		dst[0] = uint8(n)<<2 | tagLiteral
+		i = 1
+	case n < 1<<8:
+		dst[0] = 60<<2 | tagLiteral
+		dst[1] = uint8(n)
+		i = 2
+	default:
+		dst[0] = 61<<2 | tagLiteral
+		dst[1] = uint8(n)
+		dst[2] = uint8(n >> 8)
+		i = 3
+	}
+	return i + copy(dst[i:], lit)
+}
+
+// emitCopy writes a copy chunk and returns the number of bytes written.
+//
+// It assumes that:
+//	dst is long enough to hold the encoded bytes
+//	1 <= offset && offset <= 65535
+//	4 <= length && length <= 65535
+func emitCopy(dst []byte, offset, length int) int {
+	i := 0
+	// The maximum length for a single tagCopy1 or tagCopy2 op is 64 bytes. The
+	// threshold for this loop is a little higher (at 68 = 64 + 4), and the
+	// length emitted down below is is a little lower (at 60 = 64 - 4), because
+	// it's shorter to encode a length 67 copy as a length 60 tagCopy2 followed
+	// by a length 7 tagCopy1 (which encodes as 3+2 bytes) than to encode it as
+	// a length 64 tagCopy2 followed by a length 3 tagCopy2 (which encodes as
+	// 3+3 bytes). The magic 4 in the 64±4 is because the minimum length for a
+	// tagCopy1 op is 4 bytes, which is why a length 3 copy has to be an
+	// encodes-as-3-bytes tagCopy2 instead of an encodes-as-2-bytes tagCopy1.
+	for length >= 68 {
+		// Emit a length 64 copy, encoded as 3 bytes.
+		dst[i+0] = 63<<2 | tagCopy2
+		dst[i+1] = uint8(offset)
+		dst[i+2] = uint8(offset >> 8)
+		i += 3
+		length -= 64
+	}
+	if length > 64 {
+		// Emit a length 60 copy, encoded as 3 bytes.
+		dst[i+0] = 59<<2 | tagCopy2
+		dst[i+1] = uint8(offset)
+		dst[i+2] = uint8(offset >> 8)
+		i += 3
+		length -= 60
+	}
+	if length >= 12 || offset >= 2048 {
+		// Emit the remaining copy, encoded as 3 bytes.
+		dst[i+0] = uint8(length-1)<<2 | tagCopy2
+		dst[i+1] = uint8(offset)
+		dst[i+2] = uint8(offset >> 8)
+		return i + 3
+	}
+	// Emit the remaining copy, encoded as 2 bytes.
+	dst[i+0] = uint8(offset>>8)<<5 | uint8(length-4)<<2 | tagCopy1
+	dst[i+1] = uint8(offset)
+	return i + 2
+}
+
+// extendMatch returns the largest k such that k <= len(src) and that
+// src[i:i+k-j] and src[j:k] have the same contents.
+//
+// It assumes that:
+//	0 <= i && i < j && j <= len(src)
+func extendMatch(src []byte, i, j int) int {
+	for ; j < len(src) && src[i] == src[j]; i, j = i+1, j+1 {
+	}
+	return j
+}
+
+func hash(u, shift uint32) uint32 {
+	return (u * 0x1e35a7bd) >> shift
+}
+
+// encodeBlock encodes a non-empty src to a guaranteed-large-enough dst. It
+// assumes that the varint-encoded length of the decompressed bytes has already
+// been written.
+//
+// It also assumes that:
+//	len(dst) >= MaxEncodedLen(len(src)) &&
+// 	minNonLiteralBlockSize <= len(src) && len(src) <= maxBlockSize
+func encodeBlock(dst, src []byte) (d int) {
+	// Initialize the hash table. Its size ranges from 1<<8 to 1<<14 inclusive.
+	// The table element type is uint16, as s < sLimit and sLimit < len(src)
+	// and len(src) <= maxBlockSize and maxBlockSize == 65536.
+	const (
+		maxTableSize = 1 << 14
+		// tableMask is redundant, but helps the compiler eliminate bounds
+		// checks.
+		tableMask = maxTableSize - 1
+	)
+	shift := uint32(32 - 8)
+	for tableSize := 1 << 8; tableSize < maxTableSize && tableSize < len(src); tableSize *= 2 {
+		shift--
+	}
+	// In Go, all array elements are zero-initialized, so there is no advantage
+	// to a smaller tableSize per se. However, it matches the C++ algorithm,
+	// and in the asm versions of this code, we can get away with zeroing only
+	// the first tableSize elements.
+	var table [maxTableSize]uint16
+
+	// sLimit is when to stop looking for offset/length copies. The inputMargin
+	// lets us use a fast path for emitLiteral in the main loop, while we are
+	// looking for copies.
+	sLimit := len(src) - inputMargin
+
+	// nextEmit is where in src the next emitLiteral should start from.
+	nextEmit := 0
+
+	// The encoded form must start with a literal, as there are no previous
+	// bytes to copy, so we start looking for hash matches at s == 1.
+	s := 1
+	nextHash := hash(load32(src, s), shift)
+
+	for {
+		// Copied from the C++ snappy implementation:
+		//
+		// Heuristic match skipping: If 32 bytes are scanned with no matches
+		// found, start looking only at every other byte. If 32 more bytes are
+		// scanned (or skipped), look at every third byte, etc.. When a match
+		// is found, immediately go back to looking at every byte. This is a
+		// small loss (~5% performance, ~0.1% density) for compressible data
+		// due to more bookkeeping, but for non-compressible data (such as
+		// JPEG) it's a huge win since the compressor quickly "realizes" the
+		// data is incompressible and doesn't bother looking for matches
+		// everywhere.
+		//
+		// The "skip" variable keeps track of how many bytes there are since
+		// the last match; dividing it by 32 (ie. right-shifting by five) gives
+		// the number of bytes to move ahead for each iteration.
+		skip := 32
+
+		nextS := s
+		candidate := 0
+		for {
+			s = nextS
+			bytesBetweenHashLookups := skip >> 5
+			nextS = s + bytesBetweenHashLookups
+			skip += bytesBetweenHashLookups
+			if nextS > sLimit {
+				goto emitRemainder
+			}
+			candidate = int(table[nextHash&tableMask])
+			table[nextHash&tableMask] = uint16(s)
+			nextHash = hash(load32(src, nextS), shift)
+			if load32(src, s) == load32(src, candidate) {
+				break
+			}
+		}
+
+		// A 4-byte match has been found. We'll later see if more than 4 bytes
+		// match. But, prior to the match, src[nextEmit:s] are unmatched. Emit
+		// them as literal bytes.
+		d += emitLiteral(dst[d:], src[nextEmit:s])
+
+		// Call emitCopy, and then see if another emitCopy could be our next
+		// move. Repeat until we find no match for the input immediately after
+		// what was consumed by the last emitCopy call.
+		//
+		// If we exit this loop normally then we need to call emitLiteral next,
+		// though we don't yet know how big the literal will be. We handle that
+		// by proceeding to the next iteration of the main loop. We also can
+		// exit this loop via goto if we get close to exhausting the input.
+		for {
+			// Invariant: we have a 4-byte match at s, and no need to emit any
+			// literal bytes prior to s.
+			base := s
+
+			// Extend the 4-byte match as long as possible.
+			//
+			// This is an inlined version of:
+			//	s = extendMatch(src, candidate+4, s+4)
+			s += 4
+			for i := candidate + 4; s < len(src) && src[i] == src[s]; i, s = i+1, s+1 {
+			}
+
+			d += emitCopy(dst[d:], base-candidate, s-base)
+			nextEmit = s
+			if s >= sLimit {
+				goto emitRemainder
+			}
+
+			// We could immediately start working at s now, but to improve
+			// compression we first update the hash table at s-1 and at s. If
+			// another emitCopy is not our next move, also calculate nextHash
+			// at s+1. At least on GOARCH=amd64, these three hash calculations
+			// are faster as one load64 call (with some shifts) instead of
+			// three load32 calls.
+			x := load64(src, s-1)
+			prevHash := hash(uint32(x>>0), shift)
+			table[prevHash&tableMask] = uint16(s - 1)
+			currHash := hash(uint32(x>>8), shift)
+			candidate = int(table[currHash&tableMask])
+			table[currHash&tableMask] = uint16(s)
+			if uint32(x>>8) != load32(src, candidate) {
+				nextHash = hash(uint32(x>>16), shift)
+				s++
+				break
+			}
+		}
+	}
+
+emitRemainder:
+	if nextEmit < len(src) {
+		d += emitLiteral(dst[d:], src[nextEmit:])
+	}
+	return d
+}

vendor/github.com/golang/snappy/snappy.go

@@ -0,0 +1,98 @@
+// Copyright 2011 The Snappy-Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package snappy implements the Snappy compression format. It aims for very
+// high speeds and reasonable compression.
+//
+// There are actually two Snappy formats: block and stream. They are related,
+// but different: trying to decompress block-compressed data as a Snappy stream
+// will fail, and vice versa. The block format is the Decode and Encode
+// functions and the stream format is the Reader and Writer types.
+//
+// The block format, the more common case, is used when the complete size (the
+// number of bytes) of the original data is known upfront, at the time
+// compression starts. The stream format, also known as the framing format, is
+// for when that isn't always true.
+//
+// The canonical, C++ implementation is at https://github.com/google/snappy and
+// it only implements the block format.
+package snappy // import "github.com/golang/snappy"
+
+import (
+	"hash/crc32"
+)
+
+/*
+Each encoded block begins with the varint-encoded length of the decoded data,
+followed by a sequence of chunks. Chunks begin and end on byte boundaries. The
+first byte of each chunk is broken into its 2 least and 6 most significant bits
+called l and m: l ranges in [0, 4) and m ranges in [0, 64). l is the chunk tag.
+Zero means a literal tag. All other values mean a copy tag.
+
+For literal tags:
+  - If m < 60, the next 1 + m bytes are literal bytes.
+  - Otherwise, let n be the little-endian unsigned integer denoted by the next
+    m - 59 bytes. The next 1 + n bytes after that are literal bytes.
+
+For copy tags, length bytes are copied from offset bytes ago, in the style of
+Lempel-Ziv compression algorithms. In particular:
+  - For l == 1, the offset ranges in [0, 1<<11) and the length in [4, 12).
+    The length is 4 + the low 3 bits of m. The high 3 bits of m form bits 8-10
+    of the offset. The next byte is bits 0-7 of the offset.
+  - For l == 2, the offset ranges in [0, 1<<16) and the length in [1, 65).
+    The length is 1 + m. The offset is the little-endian unsigned integer
+    denoted by the next 2 bytes.
+  - For l == 3, this tag is a legacy format that is no longer issued by most
+    encoders. Nonetheless, the offset ranges in [0, 1<<32) and the length in
+    [1, 65). The length is 1 + m. The offset is the little-endian unsigned
+    integer denoted by the next 4 bytes.
+*/
+const (
+	tagLiteral = 0x00
+	tagCopy1   = 0x01
+	tagCopy2   = 0x02
+	tagCopy4   = 0x03
+)
+
+const (
+	checksumSize    = 4
+	chunkHeaderSize = 4
+	magicChunk      = "\xff\x06\x00\x00" + magicBody
+	magicBody       = "sNaPpY"
+
+	// maxBlockSize is the maximum size of the input to encodeBlock. It is not
+	// part of the wire format per se, but some parts of the encoder assume
+	// that an offset fits into a uint16.
+	//
+	// Also, for the framing format (Writer type instead of Encode function),
+	// https://github.com/google/snappy/blob/master/framing_format.txt says
+	// that "the uncompressed data in a chunk must be no longer than 65536
+	// bytes".
+	maxBlockSize = 65536
+
+	// maxEncodedLenOfMaxBlockSize equals MaxEncodedLen(maxBlockSize), but is
+	// hard coded to be a const instead of a variable, so that obufLen can also
+	// be a const. Their equivalence is confirmed by
+	// TestMaxEncodedLenOfMaxBlockSize.
+	maxEncodedLenOfMaxBlockSize = 76490
+
+	obufHeaderLen = len(magicChunk) + checksumSize + chunkHeaderSize
+	obufLen       = obufHeaderLen + maxEncodedLenOfMaxBlockSize
+)
+
+const (
+	chunkTypeCompressedData   = 0x00
+	chunkTypeUncompressedData = 0x01
+	chunkTypePadding          = 0xfe
+	chunkTypeStreamIdentifier = 0xff
+)
+
+var crcTable = crc32.MakeTable(crc32.Castagnoli)
+
+// crc implements the checksum specified in section 3 of
+// https://github.com/google/snappy/blob/master/framing_format.txt
+func crc(b []byte) uint32 {
+	c := crc32.Update(0, crcTable, b)
+	return uint32(c>>15|c<<17) + 0xa282ead8
+}